Cal Test Electronics
Yorba Linda, CA 92887

New Banana Jack Attenuating Adapters are CE Listed and RoHS 2 Compliant
Provide 1 MΩ impedance and accepting 4 mm. sheathed banana plugs. Allow for work in higher voltages and CAT environments such as electrical panel mains. Ideal for lower frequency (<100 kHz) but higher voltage applications.
Read More »
New 3900B Series DMM Probes are Rated to 1,000 V CAT III / 600 V CAT IV
Feature an ergonomic nose and locking safety cap, when in-place, limits tip exposure to a 4 mm. maximum. Offer grey locking cap that compliance with safety standard UL 61010-031 . Come with 75 mm. body size and have brass, nickel plated tips.
Read More »
New Banana Jacks and Test Leads are Rated to 1,000 V CAT III / 600 V CAT IV
Operate up to 5 kV when used in non-category environments, with transient overvoltages up to 2 kV. Feature 2 mm. solder cup and 4.8 mm. quick connect. Offer M3 threaded hole and 2 mm. solder cup with slot.
Read More »
New CT3382A RF Attenuator Kit is RoHS 2 Compliant
Includes six instrument grade, male to female, 50Ω coaxial fixed attenuators useful in a wide variety of applications including impedance matching and level control. Feature symmetrical Pi-pad attenuator design that are ideal for use between two equal impedances (ZS = ZL), and for matching of unequal source and load impedances (ZS ≠ ZL). Offer 2 W average power level and 250 W peak power...
Read More »
New CT4231-NI 4mm Sheathed Binding Post Carries CE Mark and is RoHS 2 Compliant
Offers versatile threaded binding cap that accommodates spade lugs, bare wires, and 2 mm pin tips through the cross-hole. Features brass body that is nickel plated for conductivity and corrosion resistance. Available in Black, Red and Green colors that are ideal for electronic and electrical projects.
Read More »
Latest Active Differential Probes Meet IEC 61010-031 Safety Standards
Consists of CT4196, CT4197 and CT4198 models with 60, 100 and 100 MHz bandwidth respectively. The CT4197 probe features 10x/100x/1000x and measures up to 4000 Vrms (max) whereas the CT4198 with 20x/200x/2000x and measures to 8,000 Vrms (max). The CT4196 probe provides 3 attenuation settings and operates up to 60 MHz.
Read More »
New Banana Plug Accessories Features Small Size and Lighter Weight
The 2 mm plug accessories include DIY in-line solder plugs and jacks, panel mounting jacks, miniature spring-loaded tip probe, and patch cord assemblies. The small size is ideal for miniature, higher frequency electronic applications and commonly used in medical applications.
Read More »
Cal Test Electronics Announces New CT4378 Fully Insulated Spring Loaded Hook Available in Black and Red Colors
4 mm safety banana jack makes for easy connection to standard sheath (shrouded) banana plug leads. RoHS 2 compliant hook grips terminal up to 9 mm in diameter. Ergonomic design for comfortable handling and used in electrical, automotive, industrial as well as in high power electronic applications.
Read More »
New CT4098 Series BNC Cable Assemblies are Constructed with Bend-Relief Boots
CT4098 Series BNC Cable Assemblies are available in CT4098-25, CT4098-50 , CT4098-100 , CT4098-120 , CT4098-150 and CT4098-200 models with 25, 50, 100, 120, 150 and 200 cm lengths respectively. Units feature an insertion loss of 0.8 dB/m (1 GHz) and a VSWR of 1.20:1 (DC to 500 MHz) and 1.70:1 (500 MHz to 1 GHz). The cable assemblies are compliant to RoHS standards and provide frequency range of...
Read More »
Coaxial Adapters are RoHS 2 compliant.
4 mm Double Banana Coaxial Adapters features BNC connectors. Units are available in CT3888 and CT3889 models. CT3888 variant comes with insulate BNC female option and is suitable for power supplies applications. CT3889 version comes with sheathed double banana plugs and meets IEC 61010 safety standard for voltages up to 1,000 V CAT II/ 600 V CAT III. CT3889 is suitable for digital multimeters or...
Read More »
New Banana Jack Attenuating Adapters are CE Listed and RoHS 2 Compliant
Provide 1 MΩ impedance and accepting 4 mm. sheathed banana plugs. Allow for work in higher voltages and CAT environments such as electrical panel mains. Ideal for lower frequency (<100 kHz) but higher voltage applications.
Read More »
New 3900B Series DMM Probes are Rated to 1,000 V CAT III / 600 V CAT IV
Feature an ergonomic nose and locking safety cap, when in-place, limits tip exposure to a 4 mm. maximum. Offer grey locking cap that compliance with safety standard UL 61010-031 . Come with 75 mm. body size and have brass, nickel plated tips.
Read More »
New Banana Jacks and Test Leads are Rated to 1,000 V CAT III / 600 V CAT IV
Operate up to 5 kV when used in non-category environments, with transient overvoltages up to 2 kV. Feature 2 mm. solder cup and 4.8 mm. quick connect. Offer M3 threaded hole and 2 mm. solder cup with slot.
Read More »
New CT3382A RF Attenuator Kit is RoHS 2 Compliant
Includes six instrument grade, male to female, 50Ω coaxial fixed attenuators useful in a wide variety of applications including impedance matching and level control. Feature symmetrical Pi-pad attenuator design that are ideal for use between two equal impedances (ZS = ZL), and for matching of unequal source and load impedances (ZS ≠ ZL). Offer 2 W average power level and 250 W peak power...
Read More »
New CT4231-NI 4mm Sheathed Binding Post Carries CE Mark and is RoHS 2 Compliant
Offers versatile threaded binding cap that accommodates spade lugs, bare wires, and 2 mm pin tips through the cross-hole. Features brass body that is nickel plated for conductivity and corrosion resistance. Available in Black, Red and Green colors that are ideal for electronic and electrical projects.
Read More »
Latest Active Differential Probes Meet IEC 61010-031 Safety Standards
Consists of CT4196, CT4197 and CT4198 models with 60, 100 and 100 MHz bandwidth respectively. The CT4197 probe features 10x/100x/1000x and measures up to 4000 Vrms (max) whereas the CT4198 with 20x/200x/2000x and measures to 8,000 Vrms (max). The CT4196 probe provides 3 attenuation settings and operates up to 60 MHz.
Read More »
New Banana Plug Accessories Features Small Size and Lighter Weight
The 2 mm plug accessories include DIY in-line solder plugs and jacks, panel mounting jacks, miniature spring-loaded tip probe, and patch cord assemblies. The small size is ideal for miniature, higher frequency electronic applications and commonly used in medical applications.
Read More »
Cal Test Electronics Announces New CT4378 Fully Insulated Spring Loaded Hook Available in Black and Red Colors
4 mm safety banana jack makes for easy connection to standard sheath (shrouded) banana plug leads. RoHS 2 compliant hook grips terminal up to 9 mm in diameter. Ergonomic design for comfortable handling and used in electrical, automotive, industrial as well as in high power electronic applications.
Read More »
New CT4098 Series BNC Cable Assemblies are Constructed with Bend-Relief Boots
CT4098 Series BNC Cable Assemblies are available in CT4098-25, CT4098-50 , CT4098-100 , CT4098-120 , CT4098-150 and CT4098-200 models with 25, 50, 100, 120, 150 and 200 cm lengths respectively. Units feature an insertion loss of 0.8 dB/m (1 GHz) and a VSWR of 1.20:1 (DC to 500 MHz) and 1.70:1 (500 MHz to 1 GHz). The cable assemblies are compliant to RoHS standards and provide frequency range of...
Read More »
Coaxial Adapters are RoHS 2 compliant.
4 mm Double Banana Coaxial Adapters features BNC connectors. Units are available in CT3888 and CT3889 models. CT3888 variant comes with insulate BNC female option and is suitable for power supplies applications. CT3889 version comes with sheathed double banana plugs and meets IEC 61010 safety standard for voltages up to 1,000 V CAT II/ 600 V CAT III. CT3889 is suitable for digital multimeters or...
Read More »