Acromag, Inc.

RS-485 Network Repeater operates off 24 Vac power.
Controls & Controllers

RS-485 Network Repeater operates off 24 Vac power.

Designed for Johnson Controls N2 or BACnet MS/TP bus control systems, Model 4683-TTM-3F drives up to 32 RS-485 devices while isolating and boosting signals up to 4,000 ft. Operation is transparent to all devices and no handshaking or extra control lines are required. Offering electrical surge protection with 1,500 Vac isolation, unit shields host computer from noise spikes and other transient...

Read More »
Ethernet I/O Devices interface with range of sensor signals.
Controls & Controllers

Ethernet I/O Devices interface with range of sensor signals.

Supporting Modbus TCP/IP and UDP/IP communication as well as peer-to-peer messaging, EtherStax® ES2153 converts 16 dc current and 16 dc voltage single-ended analog inputs from various transducers and instruments for transmission to Ethernet-based control network. DB25 serial port provides alternative voltage input connection from rack of 7B/8B signal conditioning modules to monitor variety of...

Read More »
I/O Modules come in industrial and commercial-grade versions.
Controls & Controllers

I/O Modules come in industrial and commercial-grade versions.

Offering 16-bit A/D conversion of sensor inputs, 8-channel I/O modules 967EN and 968EN accept DC current with ±20, 0-20, or 4-20 mA and ±5 or ±10 V input ranges, respectively. Industrial-grade modules offer signal integrator/totalizer function, peer-to-peer messaging, -40 to 70°C capability, and are designed to meet UL/cUL Zone 2 Class 1 Division 2 ABCD requirements. Units feature surge...

Read More »
Controls & Controllers

PMC I/O Module employs reconfigurable Virtex-5 FPGA.

Featuring Xilinx® Virtex(TM)-5 FPGA with hard core PowerPC block, PMC-VFX module enables users to offload CPU-intensive operations such as video/3D data processing or floating-point math for system performance. It offers DDR2 DRAM and dual-port SRAM for high-speed DMA transfer to PCI bus. PMC base card provides 64 I/O channels or 32 LVDS lines accessible via P4 rear connectors, while PowerPC...

Read More »
Ethernet I/O Modules link analog sensors to control network.
Controls & Controllers

Ethernet I/O Modules link analog sensors to control network.

EtherStax(TM) analog I/O models ES2151 and ES2152 interface 16 DC current inputs; 16 voltage inputs; and 16 current or voltage output signals, respectively; to Ethernet devices or controllers with Modbus TCP/IP or UDP/IP protocol communication. Suited for distributed I/O and SCADA applications, units Ethernet-enable input signals from 8B signal conditioning modules via DB25 port to monitor...

Read More »
PMC Carrier Cards provide I/O expansion.
Computer Hardware & Peripherals

PMC Carrier Cards provide I/O expansion.

Expanding use of PMC mezzanine modules in 6U CompactPCI computer systems, AcPC4620 Carrier Cards act as adapters to route PCI bus signals to and from PMC module through CompactPCI card slot edge connector. PLX Technology PCI6540 bridge device provides transparent 32-bit 33/66 MHz PCI/PCI bridge for data transactions from PCI bus to PMC site. Two models are available for conduction-cooled...

Read More »
Ethernet I/O System offers 32-channel analog input units.
Controls & Controllers

Ethernet I/O System offers 32-channel analog input units.

Suited for distributed I/O and SCADA applications, EtherStax(TM) ES2161 and ES2162 accept 32 differential DC current or voltage inputs, respectively, and interface signals to Ethernet devices/controllers with Modbus TCP/IP or UDP/IP protocol. Also, ES2162 units accept signals from 8B signal conditioning module racks through 2 DB25 ports to monitor temperature, frequency, and load cell sensors....

Read More »
PMC Carrier Cards expand I/O options for 3U cPCI systems.
Computer Hardware & Peripherals

PMC Carrier Cards expand I/O options for 3U cPCI systems.

Acting as adapter, AcPC4610 Carrier Cards are used to implement I/O and other functions from mezzanine modules when PMC slots are not available on SBC or processor boards in 3U CompactPCI computer systems. PLX Technology PCI6540 bridge device provides transparent 32-bit, 33/66 MHz PCI/PCI bridge for data transactions from PCI bus to PMC site. Offered in air- or conduction-cooled models, cards...

Read More »
PMC Modules interface I/O signals to Virtex-5 FPGA.
Controls & Controllers

PMC Modules interface I/O signals to Virtex-5 FPGA.

PMC-VSX modules feature DSP-optimized Xilinx® Virtex(TM)-5 FPGA, reconfigurable for optimal I/O processing and user-developed algorithmic computation. Banks of DDR2 DRAM accelerate data transfer in and out of FPGA, and dual-port SRAM promotes DMA transfer to PCI bus. PCI-X interface ensures bandwidth availability, and assorted plug-in I/O extension modules offer analog and digital I/O signal...

Read More »
PMC I/O Module utilizes reconfigurable Virtex-5 FPGAs.
Controls & Controllers

PMC I/O Module utilizes reconfigurable Virtex-5 FPGAs.

PMC-VLX modules feature logic-optimized Xilinx® Virtex(TM)-5 FPGA that is reconfigurable for high-performance I/O processing and custom logic routines. Two banks of 32 Mb x 16-bit DDR2 SDRAM receive data from I/O ports for FPGA processing; processed data moves to 2 banks of 256 Kb x 32-bit dual-ported SRAM for high-speed DMA transfer to PCI bus. PMC base card is ready for use in...

Read More »

All Topics