Acromag, Inc.
Wixom, MI 48393-2417
PMC I/O Module utilizes reconfigurable Virtex-5 FPGAs.
PMC-VLX modules feature logic-optimized XilinxÃ-® Virtex(TM)-5 FPGA that is reconfigurable for high-performance I/O processing and custom logic routines. Two banks of 32 Mb x 16-bit DDR2 SDRAM receive data from I/O ports for FPGA processing; processed data moves to 2 banks of 256 Kb x 32-bit dual-ported SRAM for high-speed DMA transfer to PCI bus. PMC base card is ready for use in...
Read More »
Ethernet I/O Devices process 32 inputs and 16 outputs.
Suitable in Class I, Division 2, Group A, B, C, and D locations, EtherStax(TM) Series high-density Ethernet I/O blocks offer channel-isolated discrete I/O for I/O and SCADA applications. Models ES2116, ES2117, and ES2118 have 97-132 Vac, 20-60 Vdc, and 105-135 Vdc input ranges, respectively. Features include 10/100Base-TX copper and 100Base-FX connections, Modbus TCP/UDP/IP interface to host...
Read More »
Digital I/O Modules implement user-configurable FPGA.
Industry Pack IP-EP200 Series I/O Modules interface digital I/O signals to user-configurable AlteraÃ-® Cyclone(TM) II FPGA. Several models are available to accommodate RS-485 differential, TTL, or LVDS digital I/O signals. All modules feature Cyclone II EP2C20 FPGA device with 20K logic elements, 240 Kb RAM, and 26 embedded multipliers. Series IP-EP200 allows users to develop and store their...
Read More »
I/O Modules combine configurable FPGA with DIO front-ends.
Models PMC-LX and PMC-SX support AXM plug-in I/O extension modules to interface different signal types to user-configurable XilinxÃ-® Virtex-4Ã-® FPGA, which can process user-defined algorithms and custom logic routines on RS-485 differential, CMOS, or LVDS digital I/O (DIO) signals. While PMC-LX is optimized for high-performance logic with choice of LX40 or LX60 Virtex-4 FPGAs, PMC-SX...
Read More »
Stackable Ethernet I/O Block processes 96 I/O signals.
Suited for distributed I/O and SCADA applications, EtherStax(TM) ES2113 offers Modbus TCP/UDP/IP communication to host controller and i2oÃ-® technology for peer-to-peer communication between I/O units. Dual network ports support 10/100Base-TX copper and 100Base-FX fiber-optic connections and provide redundant communication path for critical applications. Embedded web page provides...
Read More »Ethernet Switches feature redundant ring technology.
Web-managed Model EIS-408 provides six 10/100Base-TX copper ports and two 100Base-FX fiber ports, while unmanaged Model EIS-308 provides eight 10/100 copper ports and is also available without redundancy. All models include auto MDI/MDI-X crossover and auto-polarity, IEEE 802.3 and 802.3u compliance, IEEE 802.3x flow control on full-duplex, and back pressure on half-duplex. They feature IP30...
Read More »Ethernet I/O Modules combine 3 functions in one model.
Combo 951EN and 952EN Ethernet I/O Modules feature 4 analog input channels, 2 analog output channels, and 6 discrete I/O channels on single 1 in. wide unit. They support Ethernet/IP and Modbus TCP/IP protocols as well as i2o(TM) communication technology. Since Combo modules have inputs and outputs, they can function as transmitters and receivers to independently interface signals. Three-way 1,500...
Read More »
Ethernet I/O Modules speak directly to each another.
Featuring i2o(TM) technology, BusWorksÃ-® 900EN input modules can send measured signal data directly to output modules without PLC, PC, or other controller in between. Analog input modules measure current, voltage, or temperature signals and transmit data to analog output modules that provide proportional 4-20 mA or 0-10 V DC output. Discrete I/O modules control local devices based on level...
Read More »
I/O Modules feature reconfigurable FPGA.
Series PMC-AX performs A/D and D/A functions under control of user-programmable FPGA. Application-specific logic routines and algorithms can be downloaded into on-board XilinxÃ-® Virtex-IIÃ-® FPGA with up to 32,000 logic cells for control operation of I/O channels. Inputs are sampled at up to 65 MSps and processed by FPGA without CPU intervention. Models are available with 1 M, 2 M, or 3...
Read More »
Carrier Card supports 32-bit, 66 MHz PCI interface.
Model APC-PMC enables use of PMC mezzanine I/O modules in standard PCI computer system. It acts as adapter to route PCI bus signals to and from PMC module through PCI card slot edge connector. Modules with front or rear connections for I/O cable access may be used. Both 5 and 3.3 V signaling are accommodated. Typical uses include data acquisition, process control, test and measurement, motion...
Read More »