Mitsubishi Chemical Advanced Materials Inc.

Materials

PTFE Material withstands extreme temperatures/pressures.

Available in range of rod, tube, and sheet sizes, Fluorosint® 135Â- is designed to provide low coefficient of friction and deformation for seals, bearings, and washer applications. Machinability and stability offers protection against wear and breakdown, and this Polytetrafluoroethylene (PTFE) material continues to protect and reduce risk of malfunction due to corrosive chemical...

Read More »
Quadrant Engineering Plastic Products and Foresight Technologies Team Up to Produce High-Performance Wet Process Tanks for the Semiconductor Industry
Non-Industrial Products

Quadrant Engineering Plastic Products and Foresight Technologies Team Up to Produce High-Performance Wet Process Tanks for the Semiconductor Industry

Reading, Pa. - Quadrant Engineering Plastic Products and Foresight Technologies found the perfect fit for Quadrant's Symalit® PFA 1000 High Purity grade fluoropolymer to produce wet process tanks for new and replacement applications. We're pleased with the results of working with Quadrant's innovative solutions. With Symalit PFA material, we save significant cost and increase the level of...

Read More »
Polymide and PEEK(TM) Materials are fully machinable.
Chemicals & Gases

Polymide and PEEK(TM) Materials are fully machinable.

Duratron® D7000 polyimide (PI) material is offered for applications that require thermal performance in 600°F range and are available variety of sheet thicknesses and tube configurations. Homogeneous Semitron® MP370 (modified PEEK) lets builders tailor socket material to application environment and is not subject to soft center or inconsistent physical properties found in...

Read More »
Quadrant Announces Broader Size Range Available in Nylatron® NSM - The Industry's Most Wear Resistant Machinable Nylon
Fluid & Gas Flow Equipment

Quadrant Announces Broader Size Range Available in Nylatron® NSM - The Industry's Most Wear Resistant Machinable Nylon

Machinable Nylatron NSM Outlasts Them All - Now in More Sizes (Reading, PA, July 31, 2009) - Nylatron® NSM, the machinable nylon grade known for remarkable wear resistance is now available in a broader range of tubular shapes that can be more effectively machined into bearings, bushings and wear parts. Quadrant has invested in manufacturing technology that helps machinists and ultimately users...

Read More »
Quadrant to Demonstrate Benefits of Its High Performance Plastics Through a Broad Variety of Oil & Gas Applications at Offshore Europe 2009

Quadrant to Demonstrate Benefits of Its High Performance Plastics Through a Broad Variety of Oil & Gas Applications at Offshore Europe 2009

Offshore Europe 2009 - 8th-11th September, 2009 - Aberdeen, UK / Stand 1375 Key focus on Fluorosint® HPV featuring exceptional wear and bearing performance, especially developed for highly demanding Oil & Gas applications Quadrant Engineering Plastic Products (Quadrant EPP), the world's leading manufacturer of engineering plastics in stock shapes (semi-finished products as rods, sheets,...

Read More »
Machinable PTFE Materials enhance engineering flexibility.
Materials

Machinable PTFE Materials enhance engineering flexibility.

Fluorosint® HPV offers optimized bearing performance (PV) that results in parts that can withstand higher loads and velocities, while its wear resistance (K factor) lends to extended wear life. Combining higher temperature resistance with low de-formation and low coefficient of linear thermal expansion, extreme grade of Fluorosint MT-01 provides engineers with design options for instances...

Read More »
Materials

Machinable Nylon Material withstands temperatures to 300°F.

Nylatron® 4.6 high temperature nylon has heat deflection temperature (ASTM D648) over 300°F and is capable of retaining physical properties at elevated temperatures. It is suited for use in wear-resistant parts in industrial process machinery and as valve components in chemical processing applications. Reddish-brown in color, material is available in rods up to 60 mm in diameter in 3...

Read More »
Machinable Nylon Shapes feature high-temperature design.
Materials

Machinable Nylon Shapes feature high-temperature design.

Based on Stanyl® 4.6 raw material, Nylatron® 4.6 Rods and Sheets offer heat deflection temperature over 300°F. Rods up to 60 mm in diameter are available in lengths up to 3 m, while sheets are offered up to 50 mm thick in lengths of 1 and 3 m. Reddish-brown in color, Nylatron 4.6 is suitable for wear-resistant parts in industrial process machinery, as well as valve components in...

Read More »
Machinable Sheet is suited for electronics test applications.
Materials

Machinable Sheet is suited for electronics test applications.

With flexural modulus in excess of 1,400,000 psi and moisture absorption of .10%, Semitron MDS 100 is suited for sockets for semiconductor test and package equipment and fixtures for electronics testing. Offered in thicknesses from .04-.236 in. in sheet sizes of 9.84 and 19.68 in. square, it features coefficient of linear thermal expansion of 1.1 x 10-5, and heat deflection, or softening...

Read More »
Company News

Efficiency with a Global Reach: Innovative Solutions from Plastics Leader Quadrant EPP at TPS 2018

HOUSTON (PRWEB) SEPTEMBER 13, 2018 - Quadrant Engineering Plastic Products (EPP), the leading global manufacturer of high-performance thermoplastic materials, will exhibit at the 2018 Turbomachinery & Pump Symposia (TPS) in September and showcase innovative materials for static and dynamic high-temperature and high-pressure (HTHP) applications. TPS is a vital industry event, offering a forum...

Read More »
Company News

Quadrant EPP Demonstrates Commitment to Quality, Earns ISO 9001:2015 Certification

READING, PA. (PRWEB) JUNE 12, 2018 - Quadrant Engineering Plastic Products (EPP), the leading global manufacturer of high-performance thermoplastic materials, has earned the Management System Certificate ISO 9001:2015, demonstrating a commitment to quality. The standard, issued by ISO (an independent, non-governmental, global network of national standards bodies), provides guidance and tools for...

Read More »
Materials

PTFE Material withstands extreme temperatures/pressures.

Available in range of rod, tube, and sheet sizes, Fluorosint® 135Â- is designed to provide low coefficient of friction and deformation for seals, bearings, and washer applications. Machinability and stability offers protection against wear and breakdown, and this Polytetrafluoroethylene (PTFE) material continues to protect and reduce risk of malfunction due to corrosive chemical...

Read More »
People in the News

Quadrant Engineering Plastic Products Adds Two Industry Veterans to Its Leadership Team

Quadrant EPP : A Global LeaderReading, PA - Quadrant Engineering Plastic Products, the world's largest manufacturer of machinable plastic, has named two industry veterans to key director level positions as the company continues to experience strong demand for its breakthrough technologies and innovative family of materials - the broadest range of engineering plastic products available by a single...

Read More »
Company News

Quadrant Engineering Plastic Products Launches New Web-Based Material Selector and Live Web Chat

Quadrant Engineering Plastic Products just made material selection in plastics engineering a whole lot easier with the launch of their new web-based Material Selector and Live Web Chat features. The new features allow designers and engineers to easily sort and match materials to specific project parameters or connect with technical experts in seconds. Shepherding a project from inception through...

Read More »
Quadrant Engineering Plastic Products and Foresight Technologies Team Up to Produce High-Performance Wet Process Tanks for the Semiconductor Industry
Non-Industrial Products

Quadrant Engineering Plastic Products and Foresight Technologies Team Up to Produce High-Performance Wet Process Tanks for the Semiconductor Industry

Reading, Pa. - Quadrant Engineering Plastic Products and Foresight Technologies found the perfect fit for Quadrant's Symalit® PFA 1000 High Purity grade fluoropolymer to produce wet process tanks for new and replacement applications. We're pleased with the results of working with Quadrant's innovative solutions. With Symalit PFA material, we save significant cost and increase the level of...

Read More »
Polymide and PEEK(TM) Materials are fully machinable.
Chemicals & Gases

Polymide and PEEK(TM) Materials are fully machinable.

Duratron® D7000 polyimide (PI) material is offered for applications that require thermal performance in 600°F range and are available variety of sheet thicknesses and tube configurations. Homogeneous Semitron® MP370 (modified PEEK) lets builders tailor socket material to application environment and is not subject to soft center or inconsistent physical properties found in...

Read More »
Company News

Quadrant Establishes Strategic Partnership with Leading Brazilian Plastic Parts Manufacturer Solidur

Zurich, Switzerland, June, 2010) - Quadrant's Engineering Plastic Products business unit has entered into a joint venture with Sao Paulo based Solidur Plasticos Industriais. The alliance will be comprised of two separate operating units in order to service the varied needs of the overall regional market. Solidur Plasticos Industriais will continue to focus on providing custom parts to equipment...

Read More »
Quadrant Announces Broader Size Range Available in Nylatron® NSM - The Industry's Most Wear Resistant Machinable Nylon
Fluid & Gas Flow Equipment

Quadrant Announces Broader Size Range Available in Nylatron® NSM - The Industry's Most Wear Resistant Machinable Nylon

Machinable Nylatron NSM Outlasts Them All - Now in More Sizes (Reading, PA, July 31, 2009) - Nylatron® NSM, the machinable nylon grade known for remarkable wear resistance is now available in a broader range of tubular shapes that can be more effectively machined into bearings, bushings and wear parts. Quadrant has invested in manufacturing technology that helps machinists and ultimately users...

Read More »

All Topics