Universal Lighting Technologies
Suite 230
Nashville, TN 37214
Light Level Switching Ballast accommodates F14T5 lamps.
Switching from full to half output via wall switch or lighting relay, BallastarÃ-® T5 (part no. B214PU115S50A) has ballast factor of 1.15 and can operate one or two F14T5 lamps. It provides max light output for 2-by-2 fixture applications and illuminates entire area evenly. Operating from 120-277 V, 50 or 60 Hz, ballast includes end-of-lamp-life shutdown circuitry with auto re-strike for safe...
Read More »
Lighting Ballast complies with switching requirements.
Model B232PUS50-A BallastarÃ-® light-level switching ballast for T8 lamps provides light level control by switching from full light to 50% power using standard wall switches or relays allowing for easy compliance with ASHRAE 90.1 and California Title 24 switching requirements. Model B232PUS50-A complies with CEE requirements for high performance T8 lighting, operates 1 or 2 F32T8, F25T8, or...
Read More »
Electronic Ballast replaces magnetic T12 ballasts.
Designed for F96T12HO lamps, Basic-12(TM) Model B295SRUNVHP replaces traditional magnetic T12 high-output ballasts in existing or new fixtures. Featuring universal input voltage of 120-277 V, unit provides 21 W savings when replacing magnetic ballast operating two F96T12HO lamps. Basic-12 is lighter than magnetic ballasts but has same mounting dimensions and wiring, and can also operate F48, F60,...
Read More »Fluorescent Lighting Ballast suits 3-lamp applications.
Designed for high-lumen applications using high bay fluorescent fixtures, ULTim8 B332IUNVHEH-A has two 3-lamp high ballast factor (1.18) ballasts in one 6-lamp F32T8 fixture. Compatible with standard F32T8 lamps, as well as 30, 28, and 25 W T8 lamps, solution operates from universal voltage (120-277 V) and is capable of replacing HID lighting. Along with quiet operation, product lends to lamp...
Read More »
Pulse Start Metal Halide Ballast helps conserve power.
Designed for 875 W pulse start systems, P875MLTAC5M can save up to 165 W per fixture when used in applications where 1,000 W metal halide ballasts have previously been specified or installed. It is provided with pre-wired capacitor and pre-wired starter to facilitate installation into lighting fixture. Ballast also incorporates 4 input voltage taps (120/208/240/277) to cover range of lighting...
Read More »Electronic Ballast replaces magnetic T12 ballasts.
Designed for use with F96T12ES lamps, Basic-12(TM) B260I120M-A provides same amount of light as magnetic T12 ballasts while reducing energy consumption by more than 20%. It complies with federal ballast efficiency requirements for installation into new fixtures as well as with 2010 requirements for replacement ballasts. Unit features parallel lamp operation so when one lamp fails, other lamps...
Read More »Ballast incorporates 5 input voltage taps.
Designed for 750 W pulse start systems, Multi-5Ã-® Model P750ML5AC5M is suited for use when retrofitting 1,000 W metal halide systems for energy savings. It includes 120, 208, 240, 277, and 480 V input voltage taps to cover all possible lighting voltage applications. Multi-5 technology minimizes inventory and eliminates need to know operating voltage in fixture prior to servicing or...
Read More »Dual-Lamp T5 Ballasts feature operation-efficient design.
AccuStart5 T5 ballasts B228PUNV95-D and B228PUNV115-D, suited for use with F28T5 lamps, are available with .95 and 1.15 ballast factor options for flexibility in lighting design layout. Along with programmed start technology, products feature 120-277 V universal input voltage and end-of-lamp life shutdown circuitry with auto-reset. Operational efficiency facilitates compliance with ASHRAE 90.1...
Read More »Electronic Ballasts replace magnetic T12 ballasts.
Available for 1- and 2-lamp applications, Basic-12(TM) Ballasts comply with federal ballast efficiency requirements for installation into new fixtures as well as with 2010 requirements for replacement ballasts. Rapid Start units are wired identically to magnetic ballasts they replace, and mounting dimensions are identical as well.
Read More »Electronic Ballast works with variety of HID lighting.
E-Tensity ballasts are suited for HID lighting applications with lamp types from 20 W ceramic up to 400 W pulse start. They help lamps maintain original lumens to keep designed light levels and extend effective life of lamp. Available with SuperDim technology, which is compatible with 0-10 V dimming controls, ballasts have sound rating of A and may be used with photocells and occupancy sensors...
Read More »Universal Lighting Technologies Enters Acquisition Agreement
NASHVILLE, Tenn. (October 26, 2007) - Universal Lighting Technologies, a global leader in the design and manufacture of high-efficiency lighting ballasts and control systems, has entered into an acquisition agreement with Matsushita Electric Works, Ltd.(hereinafter referred to as MEW) (TSE: 6991). Through this acquisition, Universal Lighting Technologies merges with a premier global manufacturer...
Read More »
Light Level Switching Ballast accommodates F14T5 lamps.
Switching from full to half output via wall switch or lighting relay, BallastarÃ-® T5 (part no. B214PU115S50A) has ballast factor of 1.15 and can operate one or two F14T5 lamps. It provides max light output for 2-by-2 fixture applications and illuminates entire area evenly. Operating from 120-277 V, 50 or 60 Hz, ballast includes end-of-lamp-life shutdown circuitry with auto re-strike for safe...
Read More »
Lighting Ballast complies with switching requirements.
Model B232PUS50-A BallastarÃ-® light-level switching ballast for T8 lamps provides light level control by switching from full light to 50% power using standard wall switches or relays allowing for easy compliance with ASHRAE 90.1 and California Title 24 switching requirements. Model B232PUS50-A complies with CEE requirements for high performance T8 lighting, operates 1 or 2 F32T8, F25T8, or...
Read More »Universal Lighting Names Dan Cheetham Vice President, OEM & International Sales
NASHVILLE, Tenn. (January 23, 2007) - Universal Lighting Technologies names Dan Cheetham to be vice president, OEM & international sales. Providing intelligent solutions for energy efficiency, Universal Lighting is a global leader in development and manufacturing of lighting controls and ballasts. Cheetham comes to Universal Lighting from Leviton Manufacturing, where he served as director of OEM...
Read More »
Electronic Ballast replaces magnetic T12 ballasts.
Designed for F96T12HO lamps, Basic-12(TM) Model B295SRUNVHP replaces traditional magnetic T12 high-output ballasts in existing or new fixtures. Featuring universal input voltage of 120-277 V, unit provides 21 W savings when replacing magnetic ballast operating two F96T12HO lamps. Basic-12 is lighter than magnetic ballasts but has same mounting dimensions and wiring, and can also operate F48, F60,...
Read More »Fluorescent Lighting Ballast suits 3-lamp applications.
Designed for high-lumen applications using high bay fluorescent fixtures, ULTim8 B332IUNVHEH-A has two 3-lamp high ballast factor (1.18) ballasts in one 6-lamp F32T8 fixture. Compatible with standard F32T8 lamps, as well as 30, 28, and 25 W T8 lamps, solution operates from universal voltage (120-277 V) and is capable of replacing HID lighting. Along with quiet operation, product lends to lamp...
Read More »
Pulse Start Metal Halide Ballast helps conserve power.
Designed for 875 W pulse start systems, P875MLTAC5M can save up to 165 W per fixture when used in applications where 1,000 W metal halide ballasts have previously been specified or installed. It is provided with pre-wired capacitor and pre-wired starter to facilitate installation into lighting fixture. Ballast also incorporates 4 input voltage taps (120/208/240/277) to cover range of lighting...
Read More »NCQLP Approves Online Training from Universal Lighting
Nashville, Tenn. (June 28, 2006) - Three online training courses offered by Universal Lighting in its award-winning e-Learning Center are now NCQLP approved for LEU credit. The National Council on Qualifications for the Lighting Professions, or NCQLP, is a non-profit organization that evaluates the educational opportunities available to lighting professionals. NCQLP members are required to earn...
Read More »Universal Lighting Expands Online Education Program With HID Section
Nashville, Tenn. (April 12, 2006) - Universal Lighting has expanded its e-Learning Center to include HID lighting. The online education program was designed to provide free training for contractors, end-users, lighting designers, and distributors. There are now four educational courses, called modules, available through the e-Learning Center at universalballast.com. The new HID module is divided...
Read More »Electronic Ballast replaces magnetic T12 ballasts.
Designed for use with F96T12ES lamps, Basic-12(TM) B260I120M-A provides same amount of light as magnetic T12 ballasts while reducing energy consumption by more than 20%. It complies with federal ballast efficiency requirements for installation into new fixtures as well as with 2010 requirements for replacement ballasts. Unit features parallel lamp operation so when one lamp fails, other lamps...
Read More »