NewAge Industries, Inc.
Southampton, PA 18966
New Clearflo 70 PVC Tubing Meets USP Class VI Requirements
Available in 50 sizes ranging from 1/16 in. through 2 in. Made from non-toxic ingredients and is phthalate-free. Features glass-like clarity, smooth surface and handles variety of chemicals, gases and liquids.
Read More »
Second Patent Awarded for AdvantaPure®'s AdvantaPass® Clean Room Wall Pass-through System
Significant Improvements Prompt Issuance Southampton, Pa. — AdvantaPure has been granted a second U.S. patent, number 9,869,408, for its AdvantaPass technology. Introduced four years ago, AdvantaPass is a clean room wall portal system used to transfer large volumes of biopharmaceutical and pharmaceutical fluids between different classes of clean rooms. The system maintains the separation of...
Read More »
Sterile Single-Use Filling Assemblies feature molded junctions.
Sterile Molded Single-Use Filling Assemblies are suitable for biopharmaceutical and pharmaceutical products. Units are made of AdvantaSil™ silicone tubing and AdvantaFlex® biopharmaceutical tubing. Products come with accessories such as bags, filters, sterile connectors and filling needles. These assemblies feature multiport Tri-Clamp® design.
Read More »
AdvantaSil™ High Pressure Silicone Tubing meets European Pharmacopoeia standards.
AdvantaSil™ High Pressure Silicone Tubing is extruded from USP Class VI platinum-cured silicone material. Unit is operated in a temperature range of -53.9°C to 204.4°C and meets FDA and ISO standards. Product is suitable for TFF, virus filtration, inline integrity testing of filtration assemblies and high volume fluid transfer applications. Tubing is sterilizable by autoclave or gamma...
Read More »
Silicone Suction Hose from AdvantaPure is Now NSF Listed
Provides an Increased Level of Quality Assurance Southampton, Pa. — AdvantaPure now offers its high purity silicone suction hose with a National Sanitation Foundation listing (NSF-51). Applications for the hose include ultrapure water transfer, food processing, beverage conveyance, washdown stations, skid systems, and other suction and discharge uses in the food, dairy, beverage,...
Read More »
NewAge® Industries' Suction Hose, Vardex®, Turns 60
Milestone Proves the Product’s Durability Reliability Southampton, Pa. - Vardex, NewAge Industries’ steel reinforced, transparent PVC suction hose, was introduced in 1956. Since then it’s been the protective conduit for millions of gallons of fluids and has transported air and other gases. It’s a heavy-duty product that has been reliably moving fluid from point A to point B for decades....
Read More »
AdvantaPure Releases its Schedule of Trade Show Appearances for Summer & Fall 2016
Includes Events in the US Asia Southampton, Pa. — AdvantaPure plans to exhibit its biopharma and pharmaceutical fluid transfer products at several upcoming industry shows this summer and fall. Each event offers personal contact that allows customers and suppliers to discuss processes, requirements and new developments in fluid flow applications. AdvantaPure’s trade show appearances include:...
Read More »
Antimicrobial Tubing comes in sizes up to 1 in. ID.
Made from non-toxic ingredients conforming to FDA standards with no phthalates, latex, or animal-derived ingredients, Clearflo® Ag-47 protects liquids from harmful bacteria that can result in taste transfer, odors, and illnesses. NSF-listed heat sealable tubing offers 74 ±5 Shore A hardness and withstands temperatures from -40 to 125°F. Available in sizes from 1/8–1 in. ID,...
Read More »
Bioreactor Tubing Kits accelerate turnaround times.
Custom made for use with benchtop bioreactors, AdvantaPure Bioreactor Tubing Kits consist of single-use tubing, preassembled with filters and connectors, at tubing lengths specified by customer for harvest, vent, sparge, and addition lines. Tubing is made from platinum cured silicone or AdvantaFlex® heat sealable TPE, and is certified free of animal-derived components. Assembled and...
Read More »
TPE Container Closures protect product integrity.
Made from AdvantaFlex® biopharmaceutical-grade TPE asÂ- ready-to-use, closed systems, BioClosure System Assemblies feature elastomeric seals and unobstructed fluid paths. Units include Single-Use AdvantaFlex fluid transfer tubing and molded container closures, plus filters and caps. Container capacities range from 125 mL to 2 L for media bottles, 1 and 2 L for Erlenmeyer flasks, and...
Read More »NewAge® Industries Purchases Additional Facility to Increase Capacity & Ensure Continuity of Product Manufacturing
Site Will House Tubing Extruders & Mold Presses Southampton, Pa. — This month NewAge Industries closed a deal to buy two building units at a location within seven miles of its southeastern Pennsylvania headquarters. The company will renovate the space, then purchase and install new tubing extrusion equipment and presses for injection molding. The site will be used primarily to manufacture high...
Read More »NewAge® Industries Invests in New Plastic Hose Manufacturing Equipment
Proactively Replaces Extrusion Machinery Southampton, Pa. — When NewAge Industries was founded in 1954, it didn’t make anything. The company was a distributor that purchased and resold plastic tubing, reinforced hose, fittings and clamps. It wasn’t until the early 1990’s that NewAge began manufacturing products. Extrusion – a method of forcing material through a die to make a certain...
Read More »
New Clearflo 70 PVC Tubing Meets USP Class VI Requirements
Available in 50 sizes ranging from 1/16 in. through 2 in. Made from non-toxic ingredients and is phthalate-free. Features glass-like clarity, smooth surface and handles variety of chemicals, gases and liquids.
Read More »NewAge® Industries Announces 100% Employee Ownership
Rewards Long-Term Employees & Secures a Succession Plan Southampton, Pa. — At a company-wide meeting held September 5, it became official: NewAge Industries is now entirely owned by its employees through its ESOP (Employee Stock Ownership Plan). The event was the culmination of a plan first considered by CEO Ken Baker more than two decades ago. “I’ve had a lot of other business owners ask...
Read More »NewAge® Industries Celebrates Its 65th Anniversary
Southampton, Pa. — NewAge Industries has reached another significant event in its history: 2019 marks the company’s 65th year in business. What began in 1954 as a small distributorship selling a few types of plastic tubing has transformed into a multi-million-dollar manufacturer that offers dozens of tubing styles, as well as custom molded parts and hose assemblies. Industries that use...
Read More »NewAge® Industries/AdvantaPure® Completes Plant Expansion for Additional Clean Room Manufacturing Suites
Renovations Encompass Over 40,000 Sq. Ft. Southampton, Pa. — Following nearly two years of planning, preparation, construction and validation, team members at NewAge Industries/AdvantaPure are now using new clean rooms to produce platinum-cured silicone tubing, molded components and Single-Use molded tubing assemblies. The products are manufactured for the biopharm, pharmaceutical and other...
Read More »NewAge® Industries Welcomed Pennsylvania Governor Tom Wolf to Discuss ESOPs in the State
Goal was to Help Promote Employee Ownership in Pennsylvania; Meetings Focused on the Benefits of ESOPs Southampton, Pa. — On Monday, May 14, Pennsylvania Governor Tom Wolf visited plastic tubing manufacturer NewAge Industries located in Southampton, Bucks County, Pa. Governor Wolf was invited by Ken Baker, NewAge’s CEO, for discussions on the company’s employee ownership program and a tour...
Read More »
Second Patent Awarded for AdvantaPure®'s AdvantaPass® Clean Room Wall Pass-through System
Significant Improvements Prompt Issuance Southampton, Pa. — AdvantaPure has been granted a second U.S. patent, number 9,869,408, for its AdvantaPass technology. Introduced four years ago, AdvantaPass is a clean room wall portal system used to transfer large volumes of biopharmaceutical and pharmaceutical fluids between different classes of clean rooms. The system maintains the separation of...
Read More »
Sterile Single-Use Filling Assemblies feature molded junctions.
Sterile Molded Single-Use Filling Assemblies are suitable for biopharmaceutical and pharmaceutical products. Units are made of AdvantaSil™ silicone tubing and AdvantaFlex® biopharmaceutical tubing. Products come with accessories such as bags, filters, sterile connectors and filling needles. These assemblies feature multiport Tri-Clamp® design.
Read More »
AdvantaSil™ High Pressure Silicone Tubing meets European Pharmacopoeia standards.
AdvantaSil™ High Pressure Silicone Tubing is extruded from USP Class VI platinum-cured silicone material. Unit is operated in a temperature range of -53.9°C to 204.4°C and meets FDA and ISO standards. Product is suitable for TFF, virus filtration, inline integrity testing of filtration assemblies and high volume fluid transfer applications. Tubing is sterilizable by autoclave or gamma...
Read More »
