Sherwin-Williams Co. c/o Ultimate Lead Systems
Berea, OH 44017
Share:
Epoxy Coating shortens dry-to-handle times.
Fast CladÃ-® Fast Dry (FD) Epoxy, formulated for quick recoat, can be applied at 4-6 mils dry film thickness at room temperatures as low as 40Ã-
Read More »Urethane Patch Kit quickly repairs concrete.
ARMORSEALÃ-® ExpressPatch fast-dry, low-odor, water-based system requires only one coat. It protects concrete from thermal shock, impact, corrosion, chemical attack, and abrasion while providing return to service in 4 hr. ARMORSEAL offers no outgassing at high film thickness. It may be applied directly to damp concrete using flat trowel at minimum thickness of 3/16 to 1/4 in. Kit is suitable...
Read More »Epoxy Coating meets AWWA and NSF requirements.
Tank Clad(TM) HS provides interior lining for pipes and tanks containing potable water, fresh water, and salt water. It can be applied at temperatures as low as 40Ã-
Read More »Potable Water Polyurea is ANSI and NSF approved.
Part of ControlTech(TM) coatings line, EnviroLasticÃ-® AR 520 PW is USDA-acceptable and NSF-approved to ANSI-NSF 61 Standard for potable water storage. Available in brush and caulk grades, impact-resistant, VOC-free, odorless coating dries tack-free in as little as 45 sec. It may be applied at temperatures down to -20Ã-
Read More »Epoxy Coatings suits water/wastewater treatment industry.
Formulated using modified phenalkamine epoxy, Dura-Plate 235 NSF Multi-Purpose Epoxy is a VOC-compliant coating that delivers chemical- and corrosion-resistance. With flash point greater than 200Ã-
Read More »Anti-Seize Compound is USDA H1 rated and NSF registered.
Chemical- and stain-resistant Tri-FlowÃ-® Anti-Seize is formulated with TeflonÃ-® and other lubricating solids and blended into non-melting grease carrier to prevent seizing, galling, friction, and wear on stainless steel threaded parts and metal-to-metal surfaces. With temperature range of -65 to +1800 Ã-
Read More »Water-Based Epoxy suits industrial/marine applications.
Fast Clad(TM) DTM, single-coat, direct-to-metal epoxy finish, provides high film build in one coat of 4-6 mils dry film thickness. Product dries to tough gloss finish, providing corrosion and chemical resistance as well as weathering protection. Applied at 77Ã-ºF, it dries to touch in 45 min and is dry to handle in 4 hr. Low-odor coating meets VOC and HAPS requirements, cleans up with water,...
Read More »Low-VOC Coatings provide corrosion control.
ControlTech(TM) coatings include 26 low-VOC coatings engineered for use on concrete or steel tanks, floors, drains, clarifiers, sumps, and slabs. Products consists of thin film and medium film systems; laminates such as single, double, and flexible basecoat systems; mortar and mortar laminate systems; and EnviroLastic Polyurea coating systems for potable water, concrete, steel, geotextile and...
Read More »Urethane requires only one coat.
High-build, fast-drying, direct-to-metal Fast Clad(TM) DTM Urethane can be applied at 6-9 mils DFT in single coat with no outgassing or pinholing. Urethane dries in 1 hour as corrosion-resistant finish and may be applied at temperatures as low as 35Ã-
Read More »Coatings rapidly return bridges to service.
Single-coat ExpressTech Fast Clad(TM) Urethane topcoat dries in 30 min. Fast Clad(TM) FD Epoxy is a 2-component, polyamide epoxy that can be applied as high-build coating, providing up to 6-8 mils DFT in single application to marginally prepared surfaces. It is VOC-compliant at 340 g/L. Fast Clad(TM) Zinc primer can be recoated in 2 to 3 hrs. Reinforced film offers resistance to topcoat bubbling,...
Read More »