Epoxy Coatings suits water/wastewater treatment industry.
Share:
Press Release Summary:
Formulated using modified phenalkamine epoxy, Dura-Plate 235 NSF Multi-Purpose Epoxy is a VOC-compliant coating that delivers chemical- and corrosion-resistance. With flash point greater than 200°F, product withstands application temperatures from 0-120°F. Dura-Plate UHS NSF Primer ultra high solids amine epoxy adheres to pitted steel and concrete surfaces. Able to achieve 8 mil wet and dry film thickness in one pass, product cures to touch in 5 hr at 77°F and 50% RH.
Original Press Release:
NSF-Approved Dura-Plate® Coatings From Sherwin-Williams Combat Corrosion for Water and Wastewater Treatment Industry
Primer and topcoat part of ControlTech line
(ANAHEIM - June 15, 2003) - Sherwin-Williams Industrial and Marine Coatings group now offers Dura-Plate® 235 NSF Multi-Purpose Epoxy and Dura-Plate® UHS NSF Primer as part of its comprehensive ControlTech(TM) line of low-VOC, high performance coating systems for tank linings, secondary containment, and corrosion control. Both coatings were recently approved to ANSI-NSF Standard 61 for potable water on tanks of 1,000 gallons and larger and 36" and greater pipe diameters.
Engineered for use on concrete or steel tanks, floors, drains, clarifiers, sumps and slabs, Dura-Plate 235 NSF Multi-Purpose Epoxy is a low-odor, VOC-compliant coating recommended for immersion service in fresh, salt, and potable water. It delivers exceptional chemical and corrosion resistance and has a high flash point greater than 200° F. Formulated using a modified phenalkamine epoxy, Dura-Plate 235 NSF can withstand application temperatures ranging from 0° F to 120° F without adversely affecting coating performance and cures at temperatures as low as 0° F.
The versatile coating delivers exceptional chemical and corrosion resistance and is self-priming. It can be applied to 8 mils dry film thickness in one coat, and can be recoated in 3-1/2 hours at 77° F and 50% relative humidity. The semi-gloss finish is available in off-white and buff colors and may be brushed, rolled or spray applied.
Dura-Plate UHS NSF Primer is an ultra high solids amine epoxy formulated as a special application primer that adheres well to pitted steel and concrete surfaces. It penetrates into pits and tight crevices and provides a corrosion-resistant base coat for immersion service environments.
Dura-Plate UHS NSF Primer displays excellent flow and surface wetting properties, and is able to achieve an 8 mil wet and dry film thickness in one pass. Dura-Plate UHS NSF cures to the touch in five hours at 77° F and 50% relative humidity. When the mercury falls to 40° F, a low temperature hardener can be employed to allow projects to move forward despite cold weather.
Formulated from a low-molecular weight polymer, Dura-Plate UHS NSF Primer forms a dense, chemical and corrosion resistant finish. Its high crosslink density ensures superior protection, even at sharp edges, corners and welds. The gold colored primer can be brushed, rolled or spray applied, and topcoated with lining and laminate systems.
Sherwin-Williams Industrial and Marine Coatings group serves North America with a broad line of high-performance coatings, comprehensive technical service, and the industry's largest distribution network. Relying on more than 135 years of experience in formulating industrial coatings, the group provides cost-effective solutions for applications where extreme corrosion, abrasion and chemical attack are present. Visit Sherwin-Williams on the World Wide Web at www.sherwin-williams.com or to have a representative contact you, call 1-800-524-5979.
