Labconco Corp.

Fluid & Gas Flow Equipment

Labconco's WaterPro® RO Water Purification Systems Are Updated with Sleek New Look

WaterPro Water Purification Systems provide point-of-use pure water for the laboratory and now sport a fresh, new look. RO purified water is the first level of laboratory water purification and will produce Type III or IV water depending on the tap water quality. Water is dispensed at a rate of 1 liter per minute depending on inlet water temperature. The internal reservoir holds 17 liters of...

Read More »
Multi-Speed Blowers utilize electronically commutated motor.
HVAC

Multi-Speed Blowers utilize electronically commutated motor.

Featuring weatherized, direct drive, non-explosion-proofÂ- design, Intelli-Sense Multi-Speed Blowers are controlled by 2- or 3-position switch. Units can exhaust fume hoods from 3–7 ft in width at full sash open height and 100 fpm face velocity. Phenolic coated steel models are recommended for low to moderately corrosive applications, while fiberglass units suit highly...

Read More »
Purification System produces Type I, RO-purified water from tap.
Fluid & Gas Flow Equipment

Purification System produces Type I, RO-purified water from tap.

Offering all-in-one functionality fromÂ- benchtop form factor, WaterPro® BT™ delivers ultrapure Type I, 18.2 megohm-cm, at >0.5 Lpm (typ) at inlet water temperatures of 25°C, either manually or volumetrically, directly from tap water. System also delivers Reverse Osmosis (RO)-purified Type III water, which is accessible via outlet valve and produced at up to 3 Lph (0.05 Lpm)....

Read More »
Laboratory Hood contains chemical fumes and vapors.
Electrical Equipment & Systems

Laboratory Hood contains chemical fumes and vapors.

Designed to operate at low air volumes, Protector® XStream® Laboratory Hood uses patented features that work together to reduce concentrations of contaminants in areas behind sash opening and near user's breathing zone. Upper dilution air supply bathes sash interior with clean air, eliminating chemical fumes along sash plane, while Eco-Foil air foil with Clean-Sweep™ openings...

Read More »
Laboratory Fume Hoods have chemical-resistant fiberglass liners.
Electrical Equipment & Systems

Laboratory Fume Hoods have chemical-resistant fiberglass liners.

Operated as low as 60 fpm, Protector® Premier® hoods have interior with molded, one-piece, fiberglass-reinforced polyester liner that offers fire-resistance and facilitated cleanup. Eco-Foil™ air foil, featuring Clean-Sweep™ airflow slots, lets clean air continuously flow through to create constant, protective barrier of protection from contaminants. Automatic air bypass system,...

Read More »
Laboratory Glassware Washers fit lower countertops.
Cleaning Products & Equipment

Laboratory Glassware Washers fit lower countertops.

Promoting loading/unloading accessibility for all lab associates, FlaskScrubber® 33 and SteamScrubber® 33 are available with overall height of 33 in. SteamScrubbers have top and bottom racks that accommodate accessory inserts for range of glassware shapes and sizes, and FlaskScrubbers come with all components needed and have tower spindle racks that hold up to 36 pieces of primarily...

Read More »
Floor-Mounted Lab Hoods accommodate oversized apparatus.
Electrical Equipment & Systems

Floor-Mounted Lab Hoods accommodate oversized apparatus.

Protector® XL bypass airflow fume hoods with chemical-resistant panel liners offer max visibility of 73.5 in.Â- high. Allowing operation down to 60 fpm, hoods with vertical-rising sashes meet SEFA-1 standard. Widths of 4, 5, 6, and 8 ft are available. Containment-enhancing features include 2 tempered safety glass sashes with powder-coated aluminum sash handles and powder-coated steel...

Read More »
Filtered Ductless Fume Hood helps laboratories conserve energy.
Electrical Equipment & Systems

Filtered Ductless Fume Hood helps laboratories conserve energy.

Designed for laboratories that are difficult to vent due to location,Â- Protector® Echo™ operates independent of building's exhaust system and without removing tempered air from laboratory. Neutrodine™ filters handle jobs of 6+ other kinds of carbon filters, and sensor package, backup filters, and optional g-Guard® remote monitoring software work with range of...

Read More »
Biosafety Cabinet functions as both Type A2 and B2.
Laboratory and Research Supplies and Equipment

Biosafety Cabinet functions as both Type A2 and B2.

Featuring Omni-Flex design, Purifier® Axiom™ can function as Type A2, which recirculates air back into laboratory when not working with chemical hazards, or as Type B2, which is ducted to outside for hazardous vapors. Biosafety cabinet includes convertible sash that is programmable for either 8 or 10 in. sash opening height. Providing self-guided menu with programmable, intuitive,...

Read More »
Glassware Washers fit low laboratory countertops.
Cleaning Products & Equipment

Glassware Washers fit low laboratory countertops.

Available in overall height of 33 in., FlaskScrubber® 33 and SteamScrubber® 33 can be accessed by all lab associates for loading and unloading. SteamScrubbers have top and bottom racks that accommodate accessory inserts for variety of glassware shapes and sizes - primarily beakers and other wide-mouth glassware. Equipped with tower spindle racks that hold up to 36 pieces,...

Read More »
Fluid & Gas Flow Equipment

Labconco's WaterPro® RO Water Purification Systems Are Updated with Sleek New Look

WaterPro Water Purification Systems provide point-of-use pure water for the laboratory and now sport a fresh, new look. RO purified water is the first level of laboratory water purification and will produce Type III or IV water depending on the tap water quality. Water is dispensed at a rate of 1 liter per minute depending on inlet water temperature. The internal reservoir holds 17 liters of...

Read More »
Multi-Speed Blowers utilize electronically commutated motor.
HVAC

Multi-Speed Blowers utilize electronically commutated motor.

Featuring weatherized, direct drive, non-explosion-proofÂ- design, Intelli-Sense Multi-Speed Blowers are controlled by 2- or 3-position switch. Units can exhaust fume hoods from 3–7 ft in width at full sash open height and 100 fpm face velocity. Phenolic coated steel models are recommended for low to moderately corrosive applications, while fiberglass units suit highly...

Read More »
Purification System produces Type I, RO-purified water from tap.
Fluid & Gas Flow Equipment

Purification System produces Type I, RO-purified water from tap.

Offering all-in-one functionality fromÂ- benchtop form factor, WaterPro® BT™ delivers ultrapure Type I, 18.2 megohm-cm, at >0.5 Lpm (typ) at inlet water temperatures of 25°C, either manually or volumetrically, directly from tap water. System also delivers Reverse Osmosis (RO)-purified Type III water, which is accessible via outlet valve and produced at up to 3 Lph (0.05 Lpm)....

Read More »
Laboratory Hood contains chemical fumes and vapors.
Electrical Equipment & Systems

Laboratory Hood contains chemical fumes and vapors.

Designed to operate at low air volumes, Protector® XStream® Laboratory Hood uses patented features that work together to reduce concentrations of contaminants in areas behind sash opening and near user's breathing zone. Upper dilution air supply bathes sash interior with clean air, eliminating chemical fumes along sash plane, while Eco-Foil air foil with Clean-Sweep™ openings...

Read More »
Laboratory Fume Hoods have chemical-resistant fiberglass liners.
Electrical Equipment & Systems

Laboratory Fume Hoods have chemical-resistant fiberglass liners.

Operated as low as 60 fpm, Protector® Premier® hoods have interior with molded, one-piece, fiberglass-reinforced polyester liner that offers fire-resistance and facilitated cleanup. Eco-Foil™ air foil, featuring Clean-Sweep™ airflow slots, lets clean air continuously flow through to create constant, protective barrier of protection from contaminants. Automatic air bypass system,...

Read More »
Laboratory Glassware Washers fit lower countertops.
Cleaning Products & Equipment

Laboratory Glassware Washers fit lower countertops.

Promoting loading/unloading accessibility for all lab associates, FlaskScrubber® 33 and SteamScrubber® 33 are available with overall height of 33 in. SteamScrubbers have top and bottom racks that accommodate accessory inserts for range of glassware shapes and sizes, and FlaskScrubbers come with all components needed and have tower spindle racks that hold up to 36 pieces of primarily...

Read More »
Floor-Mounted Lab Hoods accommodate oversized apparatus.
Electrical Equipment & Systems

Floor-Mounted Lab Hoods accommodate oversized apparatus.

Protector® XL bypass airflow fume hoods with chemical-resistant panel liners offer max visibility of 73.5 in.Â- high. Allowing operation down to 60 fpm, hoods with vertical-rising sashes meet SEFA-1 standard. Widths of 4, 5, 6, and 8 ft are available. Containment-enhancing features include 2 tempered safety glass sashes with powder-coated aluminum sash handles and powder-coated steel...

Read More »
Filtered Ductless Fume Hood helps laboratories conserve energy.
Electrical Equipment & Systems

Filtered Ductless Fume Hood helps laboratories conserve energy.

Designed for laboratories that are difficult to vent due to location,Â- Protector® Echo™ operates independent of building's exhaust system and without removing tempered air from laboratory. Neutrodine™ filters handle jobs of 6+ other kinds of carbon filters, and sensor package, backup filters, and optional g-Guard® remote monitoring software work with range of...

Read More »
Biosafety Cabinet functions as both Type A2 and B2.
Laboratory and Research Supplies and Equipment

Biosafety Cabinet functions as both Type A2 and B2.

Featuring Omni-Flex design, Purifier® Axiom™ can function as Type A2, which recirculates air back into laboratory when not working with chemical hazards, or as Type B2, which is ducted to outside for hazardous vapors. Biosafety cabinet includes convertible sash that is programmable for either 8 or 10 in. sash opening height. Providing self-guided menu with programmable, intuitive,...

Read More »
Glassware Washers fit low laboratory countertops.
Cleaning Products & Equipment

Glassware Washers fit low laboratory countertops.

Available in overall height of 33 in., FlaskScrubber® 33 and SteamScrubber® 33 can be accessed by all lab associates for loading and unloading. SteamScrubbers have top and bottom racks that accommodate accessory inserts for variety of glassware shapes and sizes - primarily beakers and other wide-mouth glassware. Equipped with tower spindle racks that hold up to 36 pieces,...

Read More »

All Topics