Siemens Building Technologies Division
Suite 100
St Rose, LA 70087
Share:
Fire Suppression System provides 1,200 lb of agent.
Agent Delivery Cylinder, Model FM-200R can provide 24 hr suppression protection for areas up to 40,000 cu-ft. During fire, system allows for maximum of 1,200 lb to be distributed through fixed piping network for protection of facility's most critical assets. Clean, colorless gas extinguishes fire in seconds and leaves no residue or damage.
Read More »Air Volume Controller responds to supply air temperature.
TALONÃ-® PredatorÃ-® Variable Air Volume controller features thermal control sequence that automatically adjusts air flow to maintain cooling as supply air temperature changes. It facilitates DX cooling zone control by eliminating room temperature disturbance due to frequent cycling of DX systems. Varying supply temperature causes adjustment of air flow rate in response to supply...
Read More »Fire Alarm Panel protects small and mid-sized facilities.
Single-loop Model FS-250 supports up to 252 addressable inputs and 252 signal/relay outputs. Device is polarity insensitive and can operate on standard wire with no special twist or shield required. Panel is programmable from front keypad or through Windows-based PC programming software. Device programmer/tester can be utilized to test addressable loop wiring for shorts and grounds as well as...
Read More »Fire Detection System offers optional 6 in. VGA display.
System MXL utilizes Model MMB-3 processor board to help bring systems into compliance with NFPA and UL requirements. Board includes 2 analog loop device circuits allowing use of unshielded, untwisted wires. It employs firmware in flash memory so code added to laptop computer can be downloaded directly into powered panel. Board allows up to 50 loops and FirePrint detectors on MXL system. Optional...
Read More »Fire Detector Tester reduces programming and test times.
Device Program Unit, for diagnostic testing of fire detectors, is for programming MXL and XLS devices and testing XLS circuits and may also be used as XLS loop circuit driver. Unit operates on rechargeable NiMh or Alkaline batteries, has optional label printer, uses FLASH memory, and has backlit screen. Unit has DB-3S base adapter for testing and programming ILI and ILP series detectors.
Read More »Fire-Alarm Speaker cuts power use in half.
Model S-HPMG-MCS, with integrated multi-candela strobe light on metal grill, produces sound level of 77.1 dB with 1/16 W. Strobe operates on Xenon flashtube and offers field-selectable candela values, including 15/75, 30/75, 75, and 110. Field-selectable audio power taps range from 1/16 to 4 W, with frequency range of 400-4,000 Hz. Available for wall or ceiling mounting, speaker is UL 1480 and...
Read More »Fire Alarm Control Panel suits stand-alone applications.
FireSeeker FS-100 supports series of photoelectric, thermal, and photo/thermal combination detectors. Detector sensitivity may be adapted to proper level during system configuration and fixed or changed on time/date basis. Up to 60 addressable inputs are available. Fire safety system is UL listed and available with black or red enclosure. Operating controls and indicators are secured behind...
Read More »Fire Suppression System provides 1,200 lb of agent.
Agent Delivery Cylinder, Model FM-200R can provide 24 hr suppression protection for areas up to 40,000 cu-ft. During fire, system allows for maximum of 1,200 lb to be distributed through fixed piping network for protection of facility's most critical assets. Clean, colorless gas extinguishes fire in seconds and leaves no residue or damage.
Read More »Air Volume Controller responds to supply air temperature.
TALONÃ-® PredatorÃ-® Variable Air Volume controller features thermal control sequence that automatically adjusts air flow to maintain cooling as supply air temperature changes. It facilitates DX cooling zone control by eliminating room temperature disturbance due to frequent cycling of DX systems. Varying supply temperature causes adjustment of air flow rate in response to supply...
Read More »Fire Alarm Panel protects small and mid-sized facilities.
Single-loop Model FS-250 supports up to 252 addressable inputs and 252 signal/relay outputs. Device is polarity insensitive and can operate on standard wire with no special twist or shield required. Panel is programmable from front keypad or through Windows-based PC programming software. Device programmer/tester can be utilized to test addressable loop wiring for shorts and grounds as well as...
Read More »Fire Detection System offers optional 6 in. VGA display.
System MXL utilizes Model MMB-3 processor board to help bring systems into compliance with NFPA and UL requirements. Board includes 2 analog loop device circuits allowing use of unshielded, untwisted wires. It employs firmware in flash memory so code added to laptop computer can be downloaded directly into powered panel. Board allows up to 50 loops and FirePrint detectors on MXL system. Optional...
Read More »Fire Detector Tester reduces programming and test times.
Device Program Unit, for diagnostic testing of fire detectors, is for programming MXL and XLS devices and testing XLS circuits and may also be used as XLS loop circuit driver. Unit operates on rechargeable NiMh or Alkaline batteries, has optional label printer, uses FLASH memory, and has backlit screen. Unit has DB-3S base adapter for testing and programming ILI and ILP series detectors.
Read More »Fire-Alarm Speaker cuts power use in half.
Model S-HPMG-MCS, with integrated multi-candela strobe light on metal grill, produces sound level of 77.1 dB with 1/16 W. Strobe operates on Xenon flashtube and offers field-selectable candela values, including 15/75, 30/75, 75, and 110. Field-selectable audio power taps range from 1/16 to 4 W, with frequency range of 400-4,000 Hz. Available for wall or ceiling mounting, speaker is UL 1480 and...
Read More »Fire Alarm Control Panel suits stand-alone applications.
FireSeeker FS-100 supports series of photoelectric, thermal, and photo/thermal combination detectors. Detector sensitivity may be adapted to proper level during system configuration and fixed or changed on time/date basis. Up to 60 addressable inputs are available. Fire safety system is UL listed and available with black or red enclosure. Operating controls and indicators are secured behind...
Read More »