IDEX Health & Science LLC
Bristol, CT 06010
Fluoropolymer Manifold is made to application requirements.
Resistant to corrosion and heat in aggressive chemistry applications, custom-made Perfluoroalkoxy manifolds are constructed of translucent material that combines properties of PTFE and FEP and permits viewing of fluidic channel. Multi-layer design utilizes bonding process that allows internal fluid paths which minimize connections and solution volumes while eliminating leak points. Manifolds can...
Read More »Prototyping Service develops fluid handling products.
Refined rapid response prototyping process accelerates product development cycle times, enabling design changes to meet any dispensing, transfer, circulation, or dosing application. Service employs Design for Six Sigma and other operational excellence processes. Pumping technologies include micro-cavity and external gear pumps; multiple and valveless piston pumps; as well as peristaltic,...
Read More »
Valveless Piston Pump is suited for metering applications.
Series PF employs valveless design that minimizes clogging and allows for consistent metering and dosing of even soft-solid containing fluids at flow rates to .26 gpm and pressures to 100 psi. Constructed with reciprocating and rotating piston, unit offers various mounting options and chemical compatibility. It comes with stepper motor, that, when used with electronic controller, offers...
Read More »
Liquid Pump is electromagnetically driven.
I-DriveÃ-® combines pumphead, 40 or 70 W brushless DC motor, and controller into compact unit that delivers smooth, pulseless flow rates to 0.85 gpm. It is able to handle max DP of 100 psi and has no moving parts in drive unit. Product utilizes over-molded NdFeB magnets, surface mount technology, and heat-sink. Electronic controller provides variable speed drive options of 0-5 Vdc, 4-20 mA...
Read More »
Ultra-Low Flow Pump utilizes external gear technology.
Compact micro annular gear pump minimizes pulsations for smooth, constant flow. It helps conserve valuable liquids such as flavorings, reagents, solvents, inks, dyes, and cleaning agents. For maximum dosage accuracy, rotors provide tight flow rate control, even at differential pressures to 1,160 psi. They allow pump to dispense volumes down to 0.5 Ã-µl and handle flow rates from 0.3-288...
Read More »
Pumps/Drives offer delivery and dispensing.
IsmatecÃ-® peristaltic pumps and drives provide chemical resistance in contamination-free design. They include single- and multi-channel systems with up to 24 channels. Interchangeable pumpheads, bi-directional operation, and choice of variable or fixed-speed drives handle variety of fluids including viscous, foaming, corrosive, abrasive, and aggressive. Pumps can run dry for extended periods...
Read More »
Gear Pump suits heat transfer fluid applications.
Series 5500 combines magnetic drive and cavity-style technology with ball bearing design. Suitable for dielectric fluids like Fluorinert(TM), pump includes open ball bearing that stabilizes position of gears, minimizing friction. Magnetic drive and O-ring seals keep fluid securely inside pump for leak-free operation. Maximum performance is 21 L/min at 1750 rpm and 45 psi.
Read More »
Brushless DC Drives suit OEM applications.
MS, EG, HG, and 380 brushless DC drives are offered in multiple designs or custom configurations. They feature built-in speed control and tachometer output that allow for integration into PLC- or PC-controlled machines or end user installations. By utilizing drive stator connected directly to pump, integrated unit is able to operate pump electromagnetically with no moving parts and no direct...
Read More »
Gear Pumps are resistant to chemicals and abrasives.
Series 120 (GJ) is available with ceramics, nickel carbide, hardened stainless steel, and other wear resistant material options. Materials extend life of pumps used to deliver fluids containing hard solids or abrasives, with maximum particle size of 5 micron at concentrations of 30%. Pumps provide pulse-free flow rates to 3.2 Lpm (0.85 gpm) and pressures to 7 bar (100 psi). Magnetic drive with...
Read More »
Suction Shoe Gear Pump is suitable for continuous metering.
Pump design maintains volumetric efficiency at elevated differential pressures and offers self-compensation for wear and thermal expansion, resulting in near zero slip. Its technology utilizes pressure-loaded suction shoe around internal gears. Discharge pressure keeps suction shoe seated tightly on top of gears, which prevents flow from decreasing at higher outlet pressures. Suction shoe...
Read More »Fluoropolymer Manifold is made to application requirements.
Resistant to corrosion and heat in aggressive chemistry applications, custom-made Perfluoroalkoxy manifolds are constructed of translucent material that combines properties of PTFE and FEP and permits viewing of fluidic channel. Multi-layer design utilizes bonding process that allows internal fluid paths which minimize connections and solution volumes while eliminating leak points. Manifolds can...
Read More »Prototyping Service develops fluid handling products.
Refined rapid response prototyping process accelerates product development cycle times, enabling design changes to meet any dispensing, transfer, circulation, or dosing application. Service employs Design for Six Sigma and other operational excellence processes. Pumping technologies include micro-cavity and external gear pumps; multiple and valveless piston pumps; as well as peristaltic,...
Read More »
Valveless Piston Pump is suited for metering applications.
Series PF employs valveless design that minimizes clogging and allows for consistent metering and dosing of even soft-solid containing fluids at flow rates to .26 gpm and pressures to 100 psi. Constructed with reciprocating and rotating piston, unit offers various mounting options and chemical compatibility. It comes with stepper motor, that, when used with electronic controller, offers...
Read More »
Liquid Pump is electromagnetically driven.
I-DriveÃ-® combines pumphead, 40 or 70 W brushless DC motor, and controller into compact unit that delivers smooth, pulseless flow rates to 0.85 gpm. It is able to handle max DP of 100 psi and has no moving parts in drive unit. Product utilizes over-molded NdFeB magnets, surface mount technology, and heat-sink. Electronic controller provides variable speed drive options of 0-5 Vdc, 4-20 mA...
Read More »
Ultra-Low Flow Pump utilizes external gear technology.
Compact micro annular gear pump minimizes pulsations for smooth, constant flow. It helps conserve valuable liquids such as flavorings, reagents, solvents, inks, dyes, and cleaning agents. For maximum dosage accuracy, rotors provide tight flow rate control, even at differential pressures to 1,160 psi. They allow pump to dispense volumes down to 0.5 Ã-µl and handle flow rates from 0.3-288...
Read More »
Pumps/Drives offer delivery and dispensing.
IsmatecÃ-® peristaltic pumps and drives provide chemical resistance in contamination-free design. They include single- and multi-channel systems with up to 24 channels. Interchangeable pumpheads, bi-directional operation, and choice of variable or fixed-speed drives handle variety of fluids including viscous, foaming, corrosive, abrasive, and aggressive. Pumps can run dry for extended periods...
Read More »
Gear Pump suits heat transfer fluid applications.
Series 5500 combines magnetic drive and cavity-style technology with ball bearing design. Suitable for dielectric fluids like Fluorinert(TM), pump includes open ball bearing that stabilizes position of gears, minimizing friction. Magnetic drive and O-ring seals keep fluid securely inside pump for leak-free operation. Maximum performance is 21 L/min at 1750 rpm and 45 psi.
Read More »
Brushless DC Drives suit OEM applications.
MS, EG, HG, and 380 brushless DC drives are offered in multiple designs or custom configurations. They feature built-in speed control and tachometer output that allow for integration into PLC- or PC-controlled machines or end user installations. By utilizing drive stator connected directly to pump, integrated unit is able to operate pump electromagnetically with no moving parts and no direct...
Read More »
Gear Pumps are resistant to chemicals and abrasives.
Series 120 (GJ) is available with ceramics, nickel carbide, hardened stainless steel, and other wear resistant material options. Materials extend life of pumps used to deliver fluids containing hard solids or abrasives, with maximum particle size of 5 micron at concentrations of 30%. Pumps provide pulse-free flow rates to 3.2 Lpm (0.85 gpm) and pressures to 7 bar (100 psi). Magnetic drive with...
Read More »
Suction Shoe Gear Pump is suitable for continuous metering.
Pump design maintains volumetric efficiency at elevated differential pressures and offers self-compensation for wear and thermal expansion, resulting in near zero slip. Its technology utilizes pressure-loaded suction shoe around internal gears. Discharge pressure keeps suction shoe seated tightly on top of gears, which prevents flow from decreasing at higher outlet pressures. Suction shoe...
Read More »