IDEX Health & Science LLC

Magnet Drive Gear Pump is designed to handle abrasives.
Fluid & Gas Flow Equipment

Magnet Drive Gear Pump is designed to handle abrasives.

Originally designed for inkjet applications, White Ink Micropump can cope with titanium-pigmented inks containing 7 micron titanium particles. Key wetted components withstand corrosive and abrasive fluids. With flow rate of ~3 Lpm, pump can generate max differential pressure of 5.6 bar, and can be operated on liquids with viscosities up to 1,500 cP at temperatures up to 100°C. External gear...

Read More »
Micro Gear Pumps provide precise, pulseless flow.
Fluid & Gas Flow Equipment

Micro Gear Pumps provide precise, pulseless flow.

Offered in Low Pressure (Series ML) and High Performance (Series MH) configurations, micro annular gear pumps offer precise flow rate control to help conserve liquids and increase system efficiency. Gear tooth forming technology minimizes pulsations, and rotors provide tight flow rate control at differential pressures up to 1,160 psi. This allows pumps to dispense volumes as small as 0.25...

Read More »
Fluid & Gas Flow Equipment

Fluoropolymer Manifold is made to application requirements.

Resistant to corrosion and heat in aggressive chemistry applications, custom-made Perfluoroalkoxy manifolds are constructed of translucent material that combines properties of PTFE and FEP and permits viewing of fluidic channel. Multi-layer design utilizes bonding process that allows internal fluid paths which minimize connections and solution volumes while eliminating leak points. Manifolds can...

Read More »

Prototyping Service develops fluid handling products.

Refined rapid response prototyping process accelerates product development cycle times, enabling design changes to meet any dispensing, transfer, circulation, or dosing application. Service employs Design for Six Sigma and other operational excellence processes. Pumping technologies include micro-cavity and external gear pumps; multiple and valveless piston pumps; as well as peristaltic,...

Read More »
Valveless Piston Pump is suited for metering applications.
Fluid & Gas Flow Equipment

Valveless Piston Pump is suited for metering applications.

Series PF employs valveless design that minimizes clogging and allows for consistent metering and dosing of even soft-solid containing fluids at flow rates to .26 gpm and pressures to 100 psi. Constructed with reciprocating and rotating piston, unit offers various mounting options and chemical compatibility. It comes with stepper motor, that, when used with electronic controller, offers...

Read More »
Liquid Pump is electromagnetically driven.
Fluid & Gas Flow Equipment

Liquid Pump is electromagnetically driven.

I-Drive® combines pumphead, 40 or 70 W brushless DC motor, and controller into compact unit that delivers smooth, pulseless flow rates to 0.85 gpm. It is able to handle max DP of 100 psi and has no moving parts in drive unit. Product utilizes over-molded NdFeB magnets, surface mount technology, and heat-sink. Electronic controller provides variable speed drive options of 0-5 Vdc, 4-20 mA...

Read More »
Ultra-Low Flow Pump utilizes external gear technology.
Fluid & Gas Flow Equipment

Ultra-Low Flow Pump utilizes external gear technology.

Compact micro annular gear pump minimizes pulsations for smooth, constant flow. It helps conserve valuable liquids such as flavorings, reagents, solvents, inks, dyes, and cleaning agents. For maximum dosage accuracy, rotors provide tight flow rate control, even at differential pressures to 1,160 psi. They allow pump to dispense volumes down to 0.5 Â-µl and handle flow rates from 0.3-288...

Read More »
Pumps/Drives offer delivery and dispensing.
Fluid & Gas Flow Equipment

Pumps/Drives offer delivery and dispensing.

Ismatec® peristaltic pumps and drives provide chemical resistance in contamination-free design. They include single- and multi-channel systems with up to 24 channels. Interchangeable pumpheads, bi-directional operation, and choice of variable or fixed-speed drives handle variety of fluids including viscous, foaming, corrosive, abrasive, and aggressive. Pumps can run dry for extended periods...

Read More »
Gear Pump suits heat transfer fluid applications.
Fluid & Gas Flow Equipment

Gear Pump suits heat transfer fluid applications.

Series 5500 combines magnetic drive and cavity-style technology with ball bearing design. Suitable for dielectric fluids like Fluorinert(TM), pump includes open ball bearing that stabilizes position of gears, minimizing friction. Magnetic drive and O-ring seals keep fluid securely inside pump for leak-free operation. Maximum performance is 21 L/min at 1750 rpm and 45 psi.

Read More »
Brushless DC Drives suit OEM applications.
Controls & Controllers

Brushless DC Drives suit OEM applications.

MS, EG, HG, and 380 brushless DC drives are offered in multiple designs or custom configurations. They feature built-in speed control and tachometer output that allow for integration into PLC- or PC-controlled machines or end user installations. By utilizing drive stator connected directly to pump, integrated unit is able to operate pump electromagnetically with no moving parts and no direct...

Read More »
Magnet Drive Gear Pump is designed to handle abrasives.
Fluid & Gas Flow Equipment

Magnet Drive Gear Pump is designed to handle abrasives.

Originally designed for inkjet applications, White Ink Micropump can cope with titanium-pigmented inks containing 7 micron titanium particles. Key wetted components withstand corrosive and abrasive fluids. With flow rate of ~3 Lpm, pump can generate max differential pressure of 5.6 bar, and can be operated on liquids with viscosities up to 1,500 cP at temperatures up to 100°C. External gear...

Read More »
Micro Gear Pumps provide precise, pulseless flow.
Fluid & Gas Flow Equipment

Micro Gear Pumps provide precise, pulseless flow.

Offered in Low Pressure (Series ML) and High Performance (Series MH) configurations, micro annular gear pumps offer precise flow rate control to help conserve liquids and increase system efficiency. Gear tooth forming technology minimizes pulsations, and rotors provide tight flow rate control at differential pressures up to 1,160 psi. This allows pumps to dispense volumes as small as 0.25...

Read More »
Fluid & Gas Flow Equipment

Fluoropolymer Manifold is made to application requirements.

Resistant to corrosion and heat in aggressive chemistry applications, custom-made Perfluoroalkoxy manifolds are constructed of translucent material that combines properties of PTFE and FEP and permits viewing of fluidic channel. Multi-layer design utilizes bonding process that allows internal fluid paths which minimize connections and solution volumes while eliminating leak points. Manifolds can...

Read More »

Prototyping Service develops fluid handling products.

Refined rapid response prototyping process accelerates product development cycle times, enabling design changes to meet any dispensing, transfer, circulation, or dosing application. Service employs Design for Six Sigma and other operational excellence processes. Pumping technologies include micro-cavity and external gear pumps; multiple and valveless piston pumps; as well as peristaltic,...

Read More »
Valveless Piston Pump is suited for metering applications.
Fluid & Gas Flow Equipment

Valveless Piston Pump is suited for metering applications.

Series PF employs valveless design that minimizes clogging and allows for consistent metering and dosing of even soft-solid containing fluids at flow rates to .26 gpm and pressures to 100 psi. Constructed with reciprocating and rotating piston, unit offers various mounting options and chemical compatibility. It comes with stepper motor, that, when used with electronic controller, offers...

Read More »
Liquid Pump is electromagnetically driven.
Fluid & Gas Flow Equipment

Liquid Pump is electromagnetically driven.

I-Drive® combines pumphead, 40 or 70 W brushless DC motor, and controller into compact unit that delivers smooth, pulseless flow rates to 0.85 gpm. It is able to handle max DP of 100 psi and has no moving parts in drive unit. Product utilizes over-molded NdFeB magnets, surface mount technology, and heat-sink. Electronic controller provides variable speed drive options of 0-5 Vdc, 4-20 mA...

Read More »
Ultra-Low Flow Pump utilizes external gear technology.
Fluid & Gas Flow Equipment

Ultra-Low Flow Pump utilizes external gear technology.

Compact micro annular gear pump minimizes pulsations for smooth, constant flow. It helps conserve valuable liquids such as flavorings, reagents, solvents, inks, dyes, and cleaning agents. For maximum dosage accuracy, rotors provide tight flow rate control, even at differential pressures to 1,160 psi. They allow pump to dispense volumes down to 0.5 Â-µl and handle flow rates from 0.3-288...

Read More »
Pumps/Drives offer delivery and dispensing.
Fluid & Gas Flow Equipment

Pumps/Drives offer delivery and dispensing.

Ismatec® peristaltic pumps and drives provide chemical resistance in contamination-free design. They include single- and multi-channel systems with up to 24 channels. Interchangeable pumpheads, bi-directional operation, and choice of variable or fixed-speed drives handle variety of fluids including viscous, foaming, corrosive, abrasive, and aggressive. Pumps can run dry for extended periods...

Read More »
Gear Pump suits heat transfer fluid applications.
Fluid & Gas Flow Equipment

Gear Pump suits heat transfer fluid applications.

Series 5500 combines magnetic drive and cavity-style technology with ball bearing design. Suitable for dielectric fluids like Fluorinert(TM), pump includes open ball bearing that stabilizes position of gears, minimizing friction. Magnetic drive and O-ring seals keep fluid securely inside pump for leak-free operation. Maximum performance is 21 L/min at 1750 rpm and 45 psi.

Read More »
Brushless DC Drives suit OEM applications.
Controls & Controllers

Brushless DC Drives suit OEM applications.

MS, EG, HG, and 380 brushless DC drives are offered in multiple designs or custom configurations. They feature built-in speed control and tachometer output that allow for integration into PLC- or PC-controlled machines or end user installations. By utilizing drive stator connected directly to pump, integrated unit is able to operate pump electromagnetically with no moving parts and no direct...

Read More »

All Topics