FCI Electronics
Etters, PA 17319
Share:
I/O Connectors are designed for ADSL and VDSL applications.
SOFIXÃ-® I/O Connectors include right-angle PCB headers and cable connectors for distribution of signals or power. They are fully shielded down to PCB level and support wide range of cable types and diameters. SOFIX 4 x 6 signal connectors feature densities up to 96 lines per 10 cm on 20 mm slot pitch and 25 mm connector pitch, while 2 x 4 connectors provide 45 lines per 10 cm on 15 mm slot...
Read More »
FCI Designs Press-fit PCI Express Card-edge Connector Family
ETTERS, Pa. (February 7, 2006) - FCI, a leading supplier of connectors and interconnect systems, has developed press-fit, vertical PCI Express(TM) card-edge connectors to extend the use of high-speed, serial PCI Express architecture to the thicker system boards found in server applications. The press-fit connectors are targeted for use on 2.36mm (0.093 ) to 4.19mm (0.165 ) thick PCBs. As board...
Read More »
FCI's AirMax VS-® Provides Optimized Cost/Performance for ATCA Architectures
Etters, PA. (February 7, 2006) - FCI, a leading supplier of connectors and interconnect systems, has demonstrated that its AirMax VSÃ-® coplanar signal, power, and guidance modules are ideally-suited for use as Zone 3 interconnects in next-generation AdvancedTCAÃ-® carrier-grade communications equipment. Zone 3 in an ATCAÃ-® shelf allows for direct connection between an ATCA front...
Read More »
FCI Develops Serial Attached SCSI Right-Angle Connectors
ETTERS, PA. (February 7, 2005)--FCI, a leading manufacturer of connectors and interconnect systems, has developed 29-position, right-angle receptacle connectors for attaching Serial Attached SCSI (SAS) hard disk drives (HDDs) to processor blades, storage blades, mezzanine cards, or embedded system boards in data, communications, and industrial equipment. The raised receptacle openings are offset...
Read More »Card Edge Connectors fit MicroTCA(TM) standard.
Surface mount MicroTCA card edge connectors provide dual-row, 170-position card-edge interface on 0.75 mm pitch for plugging standard AdvancedMC(TM) card directly to MicroTCA backplane. Lead-free, RoHS compliant connectors support differential signaling at data rates of 12.5 Gbps per lane. Metal retention clips at connector ends offer mechanical strength after soldering.
Read More »FCI's Airmax VS-® Backplane Connectors and Northrop Grumman ATCA(TM) Topology Design Reach 10Gb/S
ETTERS, PA. (November 3, 2005) - FCI, a leading supplier of connectors and interconnect systems, announced its AirMax VSÃ-® high-speed connector technology has been designed into Northrop Grumman Interconnect Technologies' 16 Slot Dual Star Topology, built to reach speeds of 10Gb/s. Interconnect Technologies designed the PCB with mechanical mounting and Zone 1 power connections to leverage...
Read More »FCI Expands AirMax VS-® System with Co-Planar Power Receptacle
ETTERS, PA (November 8, 2005) -FCI further increases the design flexibility of its AirMax VSÃ-® system with the introduction of a new right-angle power receptacle. Designed to mate with existing right-angle header power connectors, the power receptacle enables power connections between co-planar circuit boards and complements the AirMax co-planar product range that already includes signal...
Read More »Connector System promotes portable electronics reliability.
RoHS-compliant ConanÃ-® 1.0 mm-pitch, low-profile, board-stacking connector system provides mechanically secure, high-density electrical interface between parallel PCBs. Polarized products, protected from improper backwards mating, utilize blade-on-beam contact interface. Offered in 9 part sizes from 9-69 contact positions, parts provide options for 4.15, 4.5, 5.0, 6.0, or 7.0 mm board...
Read More »High-Speed Connectors feature dual beam receptacle contacts.
Featuring Insert Molded Leadframe Assembly, AirMax VSÃ-® Connectors include mezzanine, co-planar, high-power, I/O, and backplane header versions suited for data, industrial, and communications applications. Units utilize edge-coupling technology and air dielectric between adjacent conductors for minimized insertion loss and crosstalk. Connectors allow for custom pin assignments, so system...
Read More »Card Edge Connectors enable SHB Express(TM) backplane designs.
Vertical PCI Express(TM) Card-Edge Connectors support backplane designs based on System Host Board Express(TM) PCIe Specification. Connectors at interface between SHB and backplane are defined as x8 and x16 PCIe connectors. Backplane slots that interface with PCI Express peripherals can be supported with x1, x4, x8, or x16 PCIe connector links. Each serial PCIe lane is comprised of differential...
Read More »