U.S. Para Plate
Bristol, VA 24201
Share:
Check Valve works with hydraulic and pneumatic systems.
Constructed of brass and 316 Stainless steel materials, CV3000 Series Check Valve employs contained seat/seal design that prolongs life of soft seal. Suited for use in hydraulic and pneumatic systems, unit withstands affects of shock, pulsing, and vibration. Seals can be varied for compatibility with gases and liquids. Standard sizes range from Ã-¼-2 in. NPT, and standard cracking pressure is...
Read More »
Pressure Regulator suits various instrument applications.
Miniature 9028 series cartridge style regulator uses all available sensing area to provide precision set pressure control in limited-space installations. Design accommodates inlet pressures to 750 psi, while outlet is factory preset for pressures from 2 to 10 psi. Cartridge can be used in single cavity or manifold. Valve spring housing projects above manifold top surface by less than 0.5 in....
Read More »
Globe Valve has zero-leakage design.
Series 5080 Manual Globe Valve offers pressure range of 0 to 6,000 psi and can be used in metering, throttling, or full open or closed operation. Encapsulated plastic seat protects against wire drawing. Teflon seat and 316 stainless steel body assure compatibility with most gases and liquids. Sizes are 3/4 and 1 in., with Cv of 3.79 and NPT or MS33649 tube connections. Ambient and cryogenic...
Read More »
Pressure-Reducing Regulator is made of stainless steel.
Miniature Series 9014 regulates inlet pressure of 0 to 3000 psi down to outlet pressures of 0 to 200 psi. Filtered inlet prevents contaminants from affecting positive seal when in lock-up condition. For precise control in low flow-rate applications, orifice sizes with Cv's of 0.01, 0.03, and 0.06 are available. Specially treated piston seal minimizes friction. Regulator includes NPT and tube-stub...
Read More »
Pressure Regulators range from 1/2 to 3 in. in size.
Gas charged 1358 Series Servo-Dome pressure regulators suit high pressure (6000 psi) applications. Valves in Servo-Dome line are available in sizes with Cv ratings from 0.6 up to 116.0. All are made from stainless steel; diaphragm, seat, and seal materials can be varied. End connections include pipe, MS tube, and standard and clamp ring type flanges. Valve domes can be loaded through use of...
Read More »
Pressure Regulators are hand operated.
Series 2350 includes valves made from brass and stainless steel, and has Cv offerings of 0.07 and 0.14. Regulators suit applications with inlet pressures to 10,000 psi and outlet pressure settings up to 6,000 psi. Inlet filter prevents seat contamination damage. Standard seat is Kel-F, which assures dead-tight shutoff under lock-up conditions. Series offers self-venting feature for inert gases....
Read More »
Check Valve works with hydraulic and pneumatic systems.
Constructed of brass and 316 Stainless steel materials, CV3000 Series Check Valve employs contained seat/seal design that prolongs life of soft seal. Suited for use in hydraulic and pneumatic systems, unit withstands affects of shock, pulsing, and vibration. Seals can be varied for compatibility with gases and liquids. Standard sizes range from Ã-¼-2 in. NPT, and standard cracking pressure is...
Read More »
Pressure Regulator suits various instrument applications.
Miniature 9028 series cartridge style regulator uses all available sensing area to provide precision set pressure control in limited-space installations. Design accommodates inlet pressures to 750 psi, while outlet is factory preset for pressures from 2 to 10 psi. Cartridge can be used in single cavity or manifold. Valve spring housing projects above manifold top surface by less than 0.5 in....
Read More »
Globe Valve has zero-leakage design.
Series 5080 Manual Globe Valve offers pressure range of 0 to 6,000 psi and can be used in metering, throttling, or full open or closed operation. Encapsulated plastic seat protects against wire drawing. Teflon seat and 316 stainless steel body assure compatibility with most gases and liquids. Sizes are 3/4 and 1 in., with Cv of 3.79 and NPT or MS33649 tube connections. Ambient and cryogenic...
Read More »
Pressure-Reducing Regulator is made of stainless steel.
Miniature Series 9014 regulates inlet pressure of 0 to 3000 psi down to outlet pressures of 0 to 200 psi. Filtered inlet prevents contaminants from affecting positive seal when in lock-up condition. For precise control in low flow-rate applications, orifice sizes with Cv's of 0.01, 0.03, and 0.06 are available. Specially treated piston seal minimizes friction. Regulator includes NPT and tube-stub...
Read More »
Pressure Regulators range from 1/2 to 3 in. in size.
Gas charged 1358 Series Servo-Dome pressure regulators suit high pressure (6000 psi) applications. Valves in Servo-Dome line are available in sizes with Cv ratings from 0.6 up to 116.0. All are made from stainless steel; diaphragm, seat, and seal materials can be varied. End connections include pipe, MS tube, and standard and clamp ring type flanges. Valve domes can be loaded through use of...
Read More »
Pressure Regulators are hand operated.
Series 2350 includes valves made from brass and stainless steel, and has Cv offerings of 0.07 and 0.14. Regulators suit applications with inlet pressures to 10,000 psi and outlet pressure settings up to 6,000 psi. Inlet filter prevents seat contamination damage. Standard seat is Kel-F, which assures dead-tight shutoff under lock-up conditions. Series offers self-venting feature for inert gases....
Read More »