Heartland Steel Products, LLC
Marysville, MI 48040
Pallet Rack System meets almost any size/capacity requirement.
Selective pallet rack system provides years of continuous service in rugged environments. Upright frames are 50,000 psi steel with one-piece welded construction. Beams are of continuously welded tubular construction, each with 3 or more heavy-duty load bearing studs. They are designed to snap and lock securely to frame in one step. Replaceable spring safety locks prevent accidental beam...
Read More »
Pallet Rack System suits first in, last out management.
Drive In/Drive Thru rack allows vehicles to enter storage area for pallet placement in front to back arrangement. Rack sections can also be back to back for vehicle entry from aisle on either side of storage area. Vehicles can enter rack bay, place pallets on supporting rails, and exit bay. They enter bay from opposite side to remove loads. Pallet rack system allows for floor to ceiling storage...
Read More »
Storage Rack offers seamless, square-tube construction.
Raptor-Rak has 3 in. wide upright columns that withstand heavy-volume forklift traffic. Fully welded tubular beams connect via 3 or 4 stud end connectors, with spring-steel, replaceable safety locks. Frame posts come in 14 through 11 gauge, 50,000 psi continuously welded steel. Hot-rolled steel makes up horizontal and diagonal angle bracing, which is MIG-welded to posts. Raptor-Rak uprights...
Read More »
Rack System provides mobile pallet storage.
PushBack Rack System is based on the use of overriding, wheeled pallet carts that travel on slightly canted rails, allowing carts to roll forward to front of bay. System configurations range from 2 to 6 pallet positions deep, with variable bay widths to accommodate single-wide or double-wide pallet rows. Upright frame is 1-piece construction, made from 50,000 psi steel, with horizontal and...
Read More »
Cantilever Rack features all structural-steel components.
Cant-I-Beam System with I-Beam construction is designed for medium- to heavy-duty load service. Both columns and arms are made of structural I-beam sections, with arms fastened to columns by 4 bolts. Arms are adjustable on 4 in. centers. Base assemblies also bolt to column, with 1 required for single-side storage; 2 for double-side storage. Load capacities range up to 109,000 lbs per column and...
Read More »
Pallet Rack System meets almost any size/capacity requirement.
Selective pallet rack system provides years of continuous service in rugged environments. Upright frames are 50,000 psi steel with one-piece welded construction. Beams are of continuously welded tubular construction, each with 3 or more heavy-duty load bearing studs. They are designed to snap and lock securely to frame in one step. Replaceable spring safety locks prevent accidental beam...
Read More »
Pallet Rack System suits first in, last out management.
Drive In/Drive Thru rack allows vehicles to enter storage area for pallet placement in front to back arrangement. Rack sections can also be back to back for vehicle entry from aisle on either side of storage area. Vehicles can enter rack bay, place pallets on supporting rails, and exit bay. They enter bay from opposite side to remove loads. Pallet rack system allows for floor to ceiling storage...
Read More »
Storage Rack offers seamless, square-tube construction.
Raptor-Rak has 3 in. wide upright columns that withstand heavy-volume forklift traffic. Fully welded tubular beams connect via 3 or 4 stud end connectors, with spring-steel, replaceable safety locks. Frame posts come in 14 through 11 gauge, 50,000 psi continuously welded steel. Hot-rolled steel makes up horizontal and diagonal angle bracing, which is MIG-welded to posts. Raptor-Rak uprights...
Read More »
Rack System provides mobile pallet storage.
PushBack Rack System is based on the use of overriding, wheeled pallet carts that travel on slightly canted rails, allowing carts to roll forward to front of bay. System configurations range from 2 to 6 pallet positions deep, with variable bay widths to accommodate single-wide or double-wide pallet rows. Upright frame is 1-piece construction, made from 50,000 psi steel, with horizontal and...
Read More »
Cantilever Rack features all structural-steel components.
Cant-I-Beam System with I-Beam construction is designed for medium- to heavy-duty load service. Both columns and arms are made of structural I-beam sections, with arms fastened to columns by 4 bolts. Arms are adjustable on 4 in. centers. Base assemblies also bolt to column, with 1 required for single-side storage; 2 for double-side storage. Load capacities range up to 109,000 lbs per column and...
Read More »