PCB Piezotronics, Inc.
Depew, NY 14043
Signal Conditioner works with piezoelectric sensors.
Model 482C, available in 1, 4, or 8 channel configurations, offers keypad control and utilizes dot matrix display with option for RS-232 computer control setup. Normal power operation is 10-15 Vdc, but, with power adapter, unit can be used with 12 Vdc, 28 Vdc, or 115 Vac/230 Vac power source. Optional features include fixed gain, clamped output for repetitive pulses, integration, filtering, and...
Read More »
Accelerometer measures extremely high frequencies.
Single-axis, ICPÃ-® Model 352A60 features extended flat frequency response of 5-60,000 Hz Ã-
Read More »
Signal Conditioner designed for strain gage-based load cells.
Model 8159A 1/8 DIN, panel mount signal conditioner provides transducer excitation and signal conditioning with analog output. It includes front panel readout, 2 high and 2 low programmable set points, peak and valley monitoring, front panel calibration, and individual LED function status indicators. Optional features include 4-20 mA output, set point relay contacts for event alarm, shutdown, or...
Read More »
Transducers/Transmitters feature all-welded construction.
Series 1500 Thin-Film Pressure Transducers and Transmitters offer integral hermetic connector or molded, integral cable options. There are no mechanical fasteners, washers, O-rings, or fluid fills. Full scale ranges span from full vacuum to 6,000 psi with accuracies of 0.5, 0.25, and 0.1%. Output signals include 0-5 Vdc, 0-10 Vdc, or loop-powered, 4-20 mA. Units are stainless steel and suited for...
Read More »
Signal Conditioner offers x1, x10, and x100 gain.
Model 480B21 portable, 3-channel ICPÃ-® sensor signal conditioner features frequency response from 0.15 Hz to 50 kHz. Fault indicator alerts of battery condition and potential sensor or input cable problems. Unit includes BNC input and output connectors, 4-pin triaxial sensor input connector, external power input for use with optional AC power supply, and 12 V auto-lighter DC power adapter.
Read More »
Triaxial Accelerometers have built-in Low-Pass filter.
Miniature ICPÃ-® triaxial accelerometers simultaneously measure vibration in 3 orthogonal directions. Filter allows low frequencies of interest to pass unchanged, while eliminating undesirable high frequencies and minimizing potential for sensor overload. With sensitivity rating of 10 mV/g with 500 g peak measurement range, Models 356A61/63/66 have signal conditioning microelectronics and are...
Read More »
Dynamic Force Sensors suit general purpose applications.
Series 218 Charge-Mode Force Sensors measure dynamic and quasi-static forces over full-scale measurement range of 10-5,000 lbs. Constructed of stainless steel, hermetically sealed miniature sensors are designed with pre-loaded quartz disks that enable operation in compression, tension, or impact mode. Supplied with English and metric mounting studs and removable impact cap, products offer...
Read More »
Miniature Accelerometer measures 0.26 x 0.57 x 0.30 in.
Model 352A56 ICPÃ-® TEDS (Transducer Electronic Data Sheet) accelerometer is structured with shear mode, piezoceramic sensing ceramic element and built-in signal conditioning microelectronics. Product conforms to IEEE P1451.4 standard, which defines mixed-mode interface that retains analog sensor signal and adds serial digital link to access TEDS embedded in sensor. Unit takes measurements...
Read More »
Sensors measure pressures of underwater explosions.
Series 138 ICPÃ-® Underwater Blast Sensors provide clean, non-resonant output through cables in adverse underwater environments. Structured with volumetrically-sensitive tourmaline crystal suspended and sealed in insulating, oil-filled vinyl tube, sensors measure shock wave pressures associated with underwater explosion testing. Products, offered in 5 ranges from 1,000-50,000 psi, offer...
Read More »
Capacitive Signal Conditioners support up to 16 channels.
Models 478A16 and 478A17 offer operation of 16 simultaneous channels in one 19 in., rack-mountable chassis. Building block architecture permits addition of features such as gain, filtering, output channel switching, keypad adjustment and control, DC voltage operation, RS-232, and IEEE-488 computer interface. Available in 100-240 Vac power, products support daisy linking of multiple chassis and...
Read More »