PCB Piezotronics, Inc.
Depew, NY 14043
Pressure Sensors feature solid-state design.
Series ICPÃ-® Dynamic Pressure Sensors measure low-level pressure and high-intensity sound pressure levels, both acoustic and ultrasonic. Models 106B50, 106B51, and 106B52 feature built-in signal conditioning microelectronics to produce low-impedance voltage output signals, and have sensitivities of 500, 1,000, and 5,000 mV/psi, respectively. All-welded, stainless steel units are suited for...
Read More »
Force Sensors feature quartz sensing element.
Three-Component Force Sensors simultaneously measure dynamic or quasi-static forces in 3 orthogonal directions, and deliver independent measurement signal for each direction. Units offer dynamic range of 1,000-10,000 lb in z-axis and 500-4,000 lb in x and y axes. ICPÃ-® versions utilize built-in microelectronics to convert high impedance charge to low impedance voltage; charge output versions...
Read More »
Condenser Microphone measures sounds to 192 dB.
Suited for high-level decibel measurements, Model 377A51, Ã-¼-inch, externally polarized pressure microphone is constructed of stainless steel and utilizes Lemo 1B 7-pin cable. It meets IEC and ANSI standards and has flat pressure-frequency response from 10 Hz to 20 kHz. Operating from 200 V power supply, product measures sound pressure levels to 192 dB re 20 Ã-µPa. Applications include...
Read More »
Triaxial Accelerometer takes NVH and off-road measurements.
Model 356A66 miniature ICPÃ-® accelerometer simultaneously measures vibration in 3 orthogonal directions. With built-in filtering, product allows frequencies of interest in useable range to pass unchanged, and eliminates high frequencies due to metal-to-metal impact. Accelerometer features hermetically sealed titanium housing and integral signal conditioning microelectronics. Sensitivity...
Read More »
Pressure Sensors utilize piezoelectric sensing elements.
Series 111/112/113 sensors utilize ICPÃ-® or charge output pressure sensors, structured with piezoelectric stable quartz sensing elements, to measure changing pressure fluctuations over amplitude and frequency range. Features include solid-state construction, hermetically-sealed housings, and laser-welded flush diaphragms. Pressure sensors are available with dynamic ranges to 20,000 psi,...
Read More »
Portable Sensor Signal Conditioners are battery-powered.
Battery-Powered Signal Conditioners, suited for powering ICPÃ-® pressure, force, and vibration sensors, provide constant-current sensor excitation. They offer features such as gain, integration, sensor bias monitoring, battery status indication, and input fault detection. Use of product enables low-noise operation and reduction of ground loop problems. Applications include in-vehicle testing...
Read More »
Calibration Services are provided for accelerometers.
Primary Calibration Services for accelerometers use laser interferometer that offers accurate magnitude and phase response over frequency range of 5 Hz to 15 kHz and measurement uncertainty of Ã-
Read More »
Torque Transducers have maintenance-free design.
Rotating torque transducers utilize non-contact, rotary transformers for sending excitation voltage to, and receiving measurement signals from, rotating strain gage sensor. With no need to replace worn brushes, products offer capacities from 50 oz-in. to 100,000 lb-in. FS and max speeds to 20,000 rpm. Optional pickup provides output proportional to speed. Units are available with keyed shaft,...
Read More »
Signal Conditioners and Electronics support TEDS Sensors.
Rack mountable TEDS (Transducer Electronic Data Sheet) multi-channel and dual-mode signal conditioners are available for use with ICPÃ-® and charge output vibration, pressure, and force sensors. In-Line Charge Converters are available with TEDS capabilities, which enable the devices to store and recall TEDS data for attached sensor. In-Line TEDS Adaptor features interface chip that allows...
Read More »
Pistonphone calibrates acoustic pressure sensors.
Hand-held Model 915A01 provides field or laboratory calibration of piezoelectric acoustic pressure sensors. Self-contained, battery-powered unit generates stable sound pressure level reference of 134 dB at 250 Hz. Included barometric pressure gauge provides ambient, atmospheric pressure correction factor. Kit includes batteries, accessories, and adaptors for calibrating Series 103, 106, and 116...
Read More »