Mfic Corporation
Suite 1000
Westwood, MA 02090
Microfluidics Introduces Wide Range of Microfluidizer-® Processors for Pharmaceutical and Biotechnology Industries
Aseptic, Enhanced, and Basic Models Meet Industry-Specific Needs Newton, MA, November 21, 2008 - Microfluidics has introduced a new line of MicrofluidizerÃ-® high-shear fluid processors designed specifically for the pharmaceutical and biotechnology industries. The comprehensive line of 24 standard pre-engineered models is the widest available on the market and allows companies to meet...
Read More »Microfluidics' M-110P Microfluidizer-® Processor Delivers Bench-top Convenience and Unprecedented Results around the Globe
Microfluidics has shipped over 50 M-110P units since February 2008 Newton, MA, November 3, 2008 - The introduction of the Microfluidics M-110P MicrofluidizerÃ-® high shear fluid processor has been an unqualified success, according to Microfluidics' Product Manager, Dave Gucwa. This unique bench-top lab machine has been accepted and embraced by the global marketplace, Gucwa noted. Over 50...
Read More »Fluid Processors suit clean room production areas.
With split configuration that separates power module from processing module, M-700 Series MicrofluidizerÃ-® Processors produce flow rates from 2 gpm at 40,000 psi to more than 10 gpm at 5,000 psi in batch or continuous mode. Power Module contains electric motor, cooling fan, hydraulic oil reservoir, and cooling system. With no electrical requirements, Processing Module operates by...
Read More »
Portable Fluid Processor handles small samples.
With pressure range of 3,000-23,000 psi and flow rate of 250-600 ml/min, bench-top MicrofluidizerÃ-® M-110S is suited for emulsions, dispersions, liposomes, cell disruption, and liquid-liquid or liquid-solid processing applications. It features 25 ml stainless steel reservoir with manual priming and purging pressure feed and integral recirculation, removable product-cooling coil and bath, and...
Read More »
Cell Disrupter Processor suits biotech applications.
Configured for cell disruption applications, M-7250-20 MicrofluidizerÃ-® processor features PLC-based, password protected controls with Windows XP-driven HMI and touch screen interface. Product achieves flow rates up to 400 Lph and incorporates product feed pump and heat exchanger. Able to interact with other pieces of equipment and integrate data with process control SCADA or Distributed...
Read More »
Fluids Processing System processes samples down to 14 ml.
With pressures to 18,000 psi and flowrate to 270 ml/min, M-110L Laboratory MicrofluidizerÃ-® processor produces microemulsions, cell disruption, and microencapsulations. Ceramic interaction chamber applies intense energy on formulation streams and collides in microscopic channels at high velocity. System includes stainless steel enclosure, small diameter tubing for minimum holdup volume, 200...
Read More »
Fluid Processor reduces particles to sub-micron size.
With dual synchronous intensifier pumping system, M-710 MicrofluidizerÃ-® keeps product flowing near constant pressure through fixed geometry interaction chamber. Resultant shear forces reduce particles and droplets to sub-micron sizes with narrow, uniform distribution, in one pass. Stainless steel, 100 hp fluid processor is capable of producing flow rates starting at 2 gpm @ 40,000 psi to...
Read More »
Fluid Processor suits cleanroom applications.
Stainless steel, split-system MicrofluidizerÃ-® 600 and 700 model series can be set up so that operating assembly is in separate room from processing assembly; one hose, up to 30 ft long, runs through wall to connect separated assemblies. Processor reduces particles to sub-micron or droplet sizes, while intensifier pump drives product stream at velocities and pressures up to 40,000 psi...
Read More »Containment Isolator enables mixing of toxic/potent products.
Suited for use with stainless steel MicrofluidizerÃ-® fluid processors, hermetically sealed containment isolator contains toxic submicron particles and droplets during high-pressure processing and helps companies comply with OSHA 1910.119 regulations. Isolator offers negative-pressure, HEPA filtration; 12 x 12 in. swing door; 2 flip up style windows; and glove ports with HypalonÃ-®...
Read More »Fluid Processor offers steam-in-place option.
MicrofluidizerÃ-® high-shear fluid processor is available with steam-sterilizable, high-pressure diaphragm needle valve that operates at pressures up to 40,000 psi. Level II steam-in-place option meets regulatory requirements for eliminating microbiological contaminants for injectable pharmaceutical formulations in cGMP manufacturing environments. Digital temperature readouts or indicator...
Read More »Microfluidics' M-110P Microfluidizer-® Processor Delivers Bench-top Convenience and Unprecedented Results around the Globe
Microfluidics has shipped over 50 M-110P units since February 2008 Newton, MA, November 3, 2008 - The introduction of the Microfluidics M-110P MicrofluidizerÃ-® high shear fluid processor has been an unqualified success, according to Microfluidics' Product Manager, Dave Gucwa. This unique bench-top lab machine has been accepted and embraced by the global marketplace, Gucwa noted. Over 50...
Read More »Microfluidics Introduces Wide Range of Microfluidizer-® Processors for Pharmaceutical and Biotechnology Industries
Aseptic, Enhanced, and Basic Models Meet Industry-Specific Needs Newton, MA, November 21, 2008 - Microfluidics has introduced a new line of MicrofluidizerÃ-® high-shear fluid processors designed specifically for the pharmaceutical and biotechnology industries. The comprehensive line of 24 standard pre-engineered models is the widest available on the market and allows companies to meet...
Read More »Microfluidics Nanotechnology Expert Selected to Speak at Particle Characterization and Processing Seminar
Newton, Mass. -Microfluidics, a wholly owned subsidiary of MFIC Corporation, announces that Dr. Thomai Panagiotou, Vice President of Research and Development at the company, will be a featured speaker at the Particle Characterization and Processing Seminar, March 20, 2008 at the Hyatt Regency La Jolla in San Diego, Calif. This educational seminar is free and will focus on applications, problem...
Read More »Microfluidics Corporation Appoints Michael C. Ferrara as Chief Executive Officer
Newton, Mass. - Microfluidics, a wholly owned subsidiary of MFIC Corporation, has announced that Michael C. Ferrara has been appointed as Chief Executive Officer. In his new role, Ferrara will be responsible for overseeing daily company operations and will serve on the Board of Directors. Mike's strategic vision and his proven ability to lead companies to success will be important in unlocking...
Read More »Fluid Processors suit clean room production areas.
With split configuration that separates power module from processing module, M-700 Series MicrofluidizerÃ-® Processors produce flow rates from 2 gpm at 40,000 psi to more than 10 gpm at 5,000 psi in batch or continuous mode. Power Module contains electric motor, cooling fan, hydraulic oil reservoir, and cooling system. With no electrical requirements, Processing Module operates by...
Read More »Microfluidics And Umass Lowell Extend Research Collaboration Agreement
Newton, Mass. - Microfluidics and the University of Massachusetts Lowell have recently signed an amendment to their previously announced research and collaboration agreement to develop new applications, processes and products in the area of nanomaterials utilizing Microfluidics leading-edge proprietary Microfluidizer processor, and in some instances, continuous chemical reactor equipment (the...
Read More »
Portable Fluid Processor handles small samples.
With pressure range of 3,000-23,000 psi and flow rate of 250-600 ml/min, bench-top MicrofluidizerÃ-® M-110S is suited for emulsions, dispersions, liposomes, cell disruption, and liquid-liquid or liquid-solid processing applications. It features 25 ml stainless steel reservoir with manual priming and purging pressure feed and integral recirculation, removable product-cooling coil and bath, and...
Read More »
Cell Disrupter Processor suits biotech applications.
Configured for cell disruption applications, M-7250-20 MicrofluidizerÃ-® processor features PLC-based, password protected controls with Windows XP-driven HMI and touch screen interface. Product achieves flow rates up to 400 Lph and incorporates product feed pump and heat exchanger. Able to interact with other pieces of equipment and integrate data with process control SCADA or Distributed...
Read More »
Fluids Processing System processes samples down to 14 ml.
With pressures to 18,000 psi and flowrate to 270 ml/min, M-110L Laboratory MicrofluidizerÃ-® processor produces microemulsions, cell disruption, and microencapsulations. Ceramic interaction chamber applies intense energy on formulation streams and collides in microscopic channels at high velocity. System includes stainless steel enclosure, small diameter tubing for minimum holdup volume, 200...
Read More »
Fluid Processor reduces particles to sub-micron size.
With dual synchronous intensifier pumping system, M-710 MicrofluidizerÃ-® keeps product flowing near constant pressure through fixed geometry interaction chamber. Resultant shear forces reduce particles and droplets to sub-micron sizes with narrow, uniform distribution, in one pass. Stainless steel, 100 hp fluid processor is capable of producing flow rates starting at 2 gpm @ 40,000 psi to...
Read More »