Copley Controls Corp.
Canton, MA 02021
Servo Drivers update 100 drives in under 100 -µsec.
Models AEP-90-18 and AEP-90-36 open standard EtherCAT-compatible Accelnet servo drives for brushless and brush motors deliver 18 and 36 A peak, respectively. Running on 20-90 Vdc power, operating modes include torque, velocity, trajectory tracking, point-to-point, and homing. Drives come equipped with Endat 2.2, Hiperface, incremental, and analog encoder feedback options. Interfaces include two...
Read More »I/O Module facilitates integration with CANopen network.
With plug-and-play functionality, Model CAN-IPM-01 lets OEMs integrate various external sensors and actuators into their distributed motion control system with appropriate I/O interfaces and preferred form factor and connectors. Board-mounted CAN I/O processor module has nine configurable 8-bit DIO ports, 12 analog ports that convert 0-3 Vdc signals into 12-bit values, 12 PWM outputs, 8 digital...
Read More »Linear Motors double pick-and-place efficiency.
Equipped with 2 independent load-positioning Forcers, each controlled by its own Xenus Micro controller, direct drive ServoTube linear motors enable pick-and-place to positioning 2 items in time usually required for one. Multiple forcers run on single rail bearing and pick twin objects with one center-to-center distance and then place them elsewhere at different center-to-center distance. Forcers...
Read More »CAN Card offers solution for CANopen system evaluation.
Compatible with 3.3 and 5 Vdc environments, Model CAN-PCI-02 provides interface between distributed motion control software and CANopen servo and stepper drives. On-board microcontroller offloads processing tasks from host computer, speeding system performance. Providing dual isolated channels and PCI 32-bit interface, card employs high-speed ISO 11898 driver circuits for CAN bus bit rates to 1...
Read More »Linear Actuator features twin outrigger bearings.
Suited for applications subject to high side loading, ServoTube Linear Actuator features iron-sleeve design and is available in 4 models that deliver continuous force of 14-27 lb, peak force up to 193 lb, and 12 stroke lengths from 29-311 mm. Magnetic design provides 12 micron repeatability and 250 micron accuracy from non-contact, integral position sensor. Outrigger bearings hold thrust rod...
Read More »Linear Positioners feature DeviceNet connectivity.
Available as linear motors and linear actuators, ServoTube positioners utilize direct-drive electromagnetic technology, which produces drive force to 420 lb, speed of 8.7 m/s, and 5.8 msÃ-² acceleration. Moving rod linear actuator has internal, lubricant-free bearings and meets IP67 qualifications. Linear motor mounts load onto traveling forcer. Both are thermally efficient, eliminating need...
Read More »Moving Rod Linear Actuator develops 418 lb peak force.
Offering plug-and-play alternative to servo-controlled pneumatic cylinders, IP67-rated ServoTube actuators utilize direct electromagnetic drive for 20 micron repeatability. Products integrate non-contact Hall position sensor and lubrication-free bearings. Able to develop continuous force from 35-66 lb and peak force from 167 lb, actuators are offered with 9 stroke lengths from 33-318 mm, develop...
Read More »
Linear Actuators incorporate vertical holding brake.
ServoTube linear actuators are available with electrically activated mechanical brake that enables products to hold vertical position with power off. Brake provides solution to power-down parking of vertical axes and controls actuator during power fail conditions. Offered as bolt-on addition, it does not expand original actuator profile and is IP67-rated. Brake is adjustment-free and has...
Read More »
Servo Amp Edge Filter reduces drive cable interference.
Model XLS-FA-01 prevents motor power cables from coupling electrical interference into nearby sensitive circuits by reducing steepness of pulse edges. Product is suited for use when interference from motor drive cables could compromise other electrical circuits in system. It works with Xenus PWM servo amplifiers, which operate from 50/60 Hz ac power; permit stand-alone, networked, and indexed...
Read More »Linear Motors target positioning applications.
ServoTube(TM) Motors feature magnetic design that enables Hall position sensor to replace optical encoder, allowing motors to meet IP67 specifications and permitting regular wash-downs. Users can double or triple drive force by using 2 or 3 forcers on single thrust tube. Four models with 25 mm diameter thrust rods provide 11.5-23 lb continuous force, 70-175 lb peak force, and max travel of 1,186...
Read More »Servo Drivers update 100 drives in under 100 -µsec.
Models AEP-90-18 and AEP-90-36 open standard EtherCAT-compatible Accelnet servo drives for brushless and brush motors deliver 18 and 36 A peak, respectively. Running on 20-90 Vdc power, operating modes include torque, velocity, trajectory tracking, point-to-point, and homing. Drives come equipped with Endat 2.2, Hiperface, incremental, and analog encoder feedback options. Interfaces include two...
Read More »I/O Module facilitates integration with CANopen network.
With plug-and-play functionality, Model CAN-IPM-01 lets OEMs integrate various external sensors and actuators into their distributed motion control system with appropriate I/O interfaces and preferred form factor and connectors. Board-mounted CAN I/O processor module has nine configurable 8-bit DIO ports, 12 analog ports that convert 0-3 Vdc signals into 12-bit values, 12 PWM outputs, 8 digital...
Read More »Linear Motors double pick-and-place efficiency.
Equipped with 2 independent load-positioning Forcers, each controlled by its own Xenus Micro controller, direct drive ServoTube linear motors enable pick-and-place to positioning 2 items in time usually required for one. Multiple forcers run on single rail bearing and pick twin objects with one center-to-center distance and then place them elsewhere at different center-to-center distance. Forcers...
Read More »CAN Card offers solution for CANopen system evaluation.
Compatible with 3.3 and 5 Vdc environments, Model CAN-PCI-02 provides interface between distributed motion control software and CANopen servo and stepper drives. On-board microcontroller offloads processing tasks from host computer, speeding system performance. Providing dual isolated channels and PCI 32-bit interface, card employs high-speed ISO 11898 driver circuits for CAN bus bit rates to 1...
Read More »Linear Actuator features twin outrigger bearings.
Suited for applications subject to high side loading, ServoTube Linear Actuator features iron-sleeve design and is available in 4 models that deliver continuous force of 14-27 lb, peak force up to 193 lb, and 12 stroke lengths from 29-311 mm. Magnetic design provides 12 micron repeatability and 250 micron accuracy from non-contact, integral position sensor. Outrigger bearings hold thrust rod...
Read More »Linear Positioners feature DeviceNet connectivity.
Available as linear motors and linear actuators, ServoTube positioners utilize direct-drive electromagnetic technology, which produces drive force to 420 lb, speed of 8.7 m/s, and 5.8 msÃ-² acceleration. Moving rod linear actuator has internal, lubricant-free bearings and meets IP67 qualifications. Linear motor mounts load onto traveling forcer. Both are thermally efficient, eliminating need...
Read More »Moving Rod Linear Actuator develops 418 lb peak force.
Offering plug-and-play alternative to servo-controlled pneumatic cylinders, IP67-rated ServoTube actuators utilize direct electromagnetic drive for 20 micron repeatability. Products integrate non-contact Hall position sensor and lubrication-free bearings. Able to develop continuous force from 35-66 lb and peak force from 167 lb, actuators are offered with 9 stroke lengths from 33-318 mm, develop...
Read More »
Linear Actuators incorporate vertical holding brake.
ServoTube linear actuators are available with electrically activated mechanical brake that enables products to hold vertical position with power off. Brake provides solution to power-down parking of vertical axes and controls actuator during power fail conditions. Offered as bolt-on addition, it does not expand original actuator profile and is IP67-rated. Brake is adjustment-free and has...
Read More »
Servo Amp Edge Filter reduces drive cable interference.
Model XLS-FA-01 prevents motor power cables from coupling electrical interference into nearby sensitive circuits by reducing steepness of pulse edges. Product is suited for use when interference from motor drive cables could compromise other electrical circuits in system. It works with Xenus PWM servo amplifiers, which operate from 50/60 Hz ac power; permit stand-alone, networked, and indexed...
Read More »Linear Motors target positioning applications.
ServoTube(TM) Motors feature magnetic design that enables Hall position sensor to replace optical encoder, allowing motors to meet IP67 specifications and permitting regular wash-downs. Users can double or triple drive force by using 2 or 3 forcers on single thrust tube. Four models with 25 mm diameter thrust rods provide 11.5-23 lb continuous force, 70-175 lb peak force, and max travel of 1,186...
Read More »