Sokymat SA
Granges CHE
Share:
Stepping Motors have high torque density.
PK Series miniature 2-phase hybrid devices are available in 2 frame sizes: 1.1 and 1.38 in. sq. Smaller model is available in lengths of 1.26, 1.57, and 2.03 in. that produce holding torques of 9.2, 13.7, and 16.6 oz-in. respectively, in bipolar excitation mode. It reaches shaft speeds of 4,000 rpm. Larger model is available in lengths of 1.46 and 2.05 in. with holding torques of 28 and 54...
Read More »
Power Equipment corrects power factor.
Cutler-Hammer Power Factor Correction line, including harmonic filter products, is available for voltage ranges 240 Vac to 115 kVac and kVAR ratings from 1 to 15,000. Equipment reduces power factor penalties, increases load capacity, and regulates voltage. Line can be used with company's low- and medium-voltage electrical distribution equipment, or retrofitted into any existing power equipment....
Read More »
Oil Skimmer removes grease and oily residue from water.
Model 6-V continuously removes oil and animal and vegetable fats from water in tanks, ponds, and sumps. Fats and oils adhere to closed-loop tube which snakes over and around debris. System lifts tube with oily residue and scum out of water, removes oils with scrapers, and returns clean tube to water surface. It works at below freezing temeperatures, outdoors or in-plant, with lifespan of more...
Read More »
Drum Handlers lift, transport, and dispense.
82A Series has 1000 lb capacity and lifts standard 55 gal drums. It can rotate drum for pouring, lock drum in horizontal position for dispensing, or lock drum in vertical position to prevent spills. Maximum dispensing height is 26 in. for horizontal drum. 82H Series has 1000 lb capacity and moves drums to and from pallets and floor. It can raise drums 34 7/8 in. tall up to 22 in. above floor.
Read More »
Ratcheting Crank Handles can be made of steel or plastic.
Ratcheting Crank Handles consist of steel revolving handles and through squares. Steel stamping bodies are riveted with slim profile gears and reversing lever control in wrench head. Combination crank and ratchet arm allows for safe machinery adjustment, while through hole design allows bolts or shafts to pass entirely through socket to secure nuts on any threaded length. Handles are available...
Read More »Safety System directs people away from hazardous areas.
Guide Rail System(TM) consists of interchangeable components that assemble into standard or custom configurations and lengths. Horizontal guide rails, vertical posts, and corner adapters are made of heavy gauge 6061-T6 extruded aluminum, powder coated in UV weather-resistant safety yellow. Guide rails are available in 5, 10, and 20 ft lengths. Swing arm gate is available in various sizes.
Read More »
Ball Valves are made of polypropylene.
Multi-port devices are available in two sizes: 3/4 in. true-union and 2 in. valve. Three position settings are available: bottom-to-right, bottom-to-left, and off. They have Teflon(R) seats and EPDM O-rings, with viton kits available on request. Valves are pressure rated at 125 psi @ 70 deg F.
Read More »
Flow Sensors replace rotameters.
Model 106F Liquid Flo-Sensors measure flow rates of fluids as low as 15 ml/min with +/-1.0% linearity and +/-0.2% repeatability, full scale. TeflonÃ-®, Kal-Rez, and sapphire construction provides compatibility with virtually any chemical, including acids or alkalines. Sensors provide electronic alternative to ball-and-tube rotameters. Seven different power and output configurations are...
Read More »Insulator Material guards against humidity.
Voltoid(TM)D-800 resin-bonded, cellulose-fiber composite can be fabricated into gaskets, insulators, lead separators, backing-plate barriers and other electrical insulation configurations. It is recognized by Underwriters Laboratories for continuous use as electrical and mechanical barrier to 105 deg C. Insulator is available in sheets in thicknesses of 0.031 to 0.125 in. It is easily fabricated...
Read More »Laser System measures and maps buildings.
Lightweight LaserPlans(TM) intelligent wheeled sensing device makes precise, annotated floor plans available to architects, inspectors, emergency rescue teams, insurance adjusters, and builders in minutes. As it is pushed around building, it measures over 1,000 sq. ft per minute, while gathering odometric data and recorded audio. Software uses data to create electronic floor plan of building,...
Read More »