FDT Group AISBL
Jodoigne BEL
Share:
Rackmount Chassis suits applied computing applications.
Model CRM/FTS-2184 2U Chassis offers micro-floppy drive, micro-CDROM, two 3.5 in. internal drive bays, and 2 front 80 mm fans. Model CRM/FTS-4194 4U Chassis offers floppy drive, 3 front-accessible 5.25 in. drive bays, and 2 front 120 mm fans. Both heavy-duty steel units feature open architecture that supports PICMG SBCs and full-length I/O cards. USB port, power on/off switch, hard drive activity...
Read More »Single Chip Solution is suited for digital flat-panel TVs.
Built around 32-bit ST20 microcontroller running at 100 MHz, STV3550 consists of LCD-TV processor that offers all digital functions needed to implement matrix display TV sets. Chip features unified memory architecture, programmable digital video output stage, and flexible horizontal and vertical format conversion in addition to adaptive progressive output mode. Built in 0.18-micron CMOS...
Read More »
Print Controller works with proprietary marking systems.
Jet-A-MarkÃ-® R44 provides multiple-printhead, rack-mounted inkjet printing system for marking diverse materials. It controls up to 16 Drop-on-Demand(TM), small character printheads for printing of text, graphic logos, and bar codes via up to 4 CPU modules, which can be mixed to handle combinations of large and small characters. Quick command panel permits first checking on message selections...
Read More »
Telehandler offers load capacity of 10,000 lb.
Model TH560B provides max lift height of 44.25 ft and max forward reach of 30.2 ft. Steering modes include 2-wheel, crab, and circle steer for agile maneuvering in tight spaces. Truck offers turning radius of 12.7 ft and 48Ã-
Read More »
Ethernet Connectors are sealed to IP67 standards.
Pulse-NetÃ-® modular, quick disconnect interconnect solutions use RJ45 components and have Pulse-LokÃ-® quick latch connector technology. Auto-coupling system provides audible, visible, and tactile mating feedback. Designed for non-office environments where transmission/acquisition of critical data has potential to be disrupted by harsh environmental factors, Ethernet connectors are made...
Read More »
CAD/CAM Software has toolpath for high-speed machining.
FeatureCAM 2005 incorporates Curly Corner Toolpath, which allows high speeds to be maintained with consistent cutter load by using trochoid path. It adjusts maximum tool load in proportion to stepover size for optimum performance and eliminates sharp transitions in cutter direction for consistent load and speed through corners and slots. Tool moves forward in swirling motion around corners,...
Read More »
Broach Set handles wide range of keyway cutting.
Minute Man No. 10 Set consists of high-speed steel broaches, bushings, and necessary shims for cutting 1/8, 3/16, 1/4, or 3/8 in. keyways in 9 bore sizes from Ã-½ to 1Ã-½ in. Push-type broaches can be used with either hand-operated arbor press or hydraulic press with adequate throat depth.
Read More »
Pluggable Relays utilize spring pressure technology.
DIN-rail-mount, 15 mm wide, Series 788 provides push-in connection of solid wire or ferruled stranded wire, and screwdriver-actuated connection of all wire types. Suited for terminating 22-14 AWG wire sizes, relays offer input voltages of 12, 24, and 110 Vdc or 230 Vac, and switch up to 16 A at up to 230 V. LED/neon lamp provides status indication. Relays deliver vibration-proof,...
Read More »
Horizontal Machining Center provides out-of-box solution.
Model EC-400 T-base horizontal machining center has work cube of 20 x 20 x 20 in., dual pallet changer with 400 mm pallets, and built-in rotary indexer. It comes with 8,000 rpm, 40 taper spindle powered by 20 hp vector dual drive system. Other features include side-mount tool changer, 1,000 ipm rapids, and coolant system. Unit automates chip removal via triple-auger chip conveyor system and...
Read More »
Vertical Machining Center offers 1,400 ipm traverse rates.
Model VF-2SS utilizes 12,000 rpm, inline, direct-drive, 40-taper spindle that is powered by 30 hp vector drive system and couples directly to motor. High-pitch ballscrews and servo motors on all axes provide rapid traverse rates of 1,400 ipm. Machine, based on Haas VF-2 platform with 30 x 16 x 20 in. travels, incorporates side-mount tool changer that holds 24 tools and one in spindle and...
Read More »