C3D Labs
Moscow 127106 RUS
Share:
Gantry Cutting Machine provides smooth cut.
Taurus(TM) incorporates Merlin 6000 GST(TM) oxygen plasma cutting system, Burny(TM) CNC 3 controller with 50-shape library, and direct drive precision planetary gearheads with high torque servomotors. Pulse Width Modulation drive amplifiers lend machine motion control capability from 2 to 500 ipm. Taurus carries up to 10 cutting stations, including up to 4 plasmas, 8 oxy-fuel stations, and 1...
Read More »
Server is 18.5 in. deep for space-constrained applications.
Power Racer 201 2U Server can be equipped with dual processors, including Intel's P4 Xeon, P4, and 133 MHz Front Side Bus Pentium III CPUs; up to 4 GB of ECC memory; and up to 2 integrated 10/100 Ethernet. Up to three 32- or 64-bit PCI slots are available. Power supply options include 95-265 Vac input single or redundant, -42-56 Vdc input 300W power supply, and 9-16 Vdc input 300 W power supply.
Read More »
DC Source offers multi-channel programmable operation.
GX1838 3U PXI DC source provides 8 output channels and 3 programmable 14-bit voltage rails. Each voltage rail can be programmed to output between -9 and +32 V, and can provide current of 100 mA. Rails can also be connected to external input, and Rail C can be connected to on-board programmable electronic load. Each rail may be switched to any of 8 output channels.
Read More »
Batch Processors mix liquids to high viscosity products.
Batch Processors are custom-designed and range from bench-scale lab units to 6,000 gallon production units. Low-viscosity liquid mixing utilizes propeller mixers. Higher-viscosity products that are temperature sensitive require scrape-surface agitation. Products from 100,000 to 1,000,000 CPS require heavy-duty scrape-surface agitation and may also require high-shear mixing.
Read More »
Software integrates LabManager and chromatography systems.
LimsLinkCDS provides full integration of LabManager(TM) iLIMS with any chromatography data system. It uses Transaction Processor Option to create secure, bi-directional CDS/LIMS interfaces. Modules provide for direct, seamless communications between CDS and LabManager iLIMS without creating additional files. Worklists can be acquired from LabManager and merged with additional information or...
Read More »
Microscope is 3 magnifying instruments in one.
Carson Magniscope consists of 8x20 mm monocular, 3X magnifier, and 30X microscope. Palm-sized ultra-miniature monocular offers 288 ft field-of-view and adjustable focus from 6 ft to infinity. 3X Lumiloupe(TM) stand magnifier offers adjustable focus and transparent acrylic base which allows ambient light to illuminate subject being studied. Threaded together, they form 30X compact microscope.
Read More »
Optics Modules provide high-speed optical data transfer.
ParaLink-P(TM) 12-channel parallel devices plug into 10 x 10 BGA socket and come in separate transmitter and receiver modules. They operate up to 2.7 Gbps per channel for total data throughput up to 32.4 Gbps over 200 m on 62.5 micrometer core multimode fiber. Modules operate on 3.3 V supply and typically draw 250 mA. Optical interface is MT-based MPO/MTP receptacle, ensuring easy connection to...
Read More »
Pressure Transducer is available with four-pin connector.
Model 8530C miniature, piezoresistive pressure transducer offers full-scale output of 225 mV. Suited for blast test applications, protective coating eliminates photoflash sensitivity and provides particle impingement protection. Coating does not degrade dynamic response characteristics of transducer, which is available in ranges from 15 to 100 psia. Its four-arm strain gage bridge is ion...
Read More »
Power Packs suit small/medium-duty truck applications.
Available in vented and non-vented designs, hydraulic power pack line offers pumping capacities to 14 gallons per minute and pressures to 2900 psi. Power up and power down designs are available in 12 and 24 Vdc configurations. Series can be used in place of clutch pumps and PTO Ltd.
Read More »
Shaft, Rail, and Bearing Assemblies are offered in 2 metals.
EasyLinear(TM) Express Shaft, Rail, and Bearing Assemblies (SRBs) include guide bar shafts available in steel and stainless steel versions. SRBs can be specified with TeflonÃ-® composite bearings with case hardened steel shafting or hard skinned 303 stainless steel shaft. Ball bearings can be specified with case hardened steel shafting. EasyLinear Express SRBs can be cut to length.
Read More »