Fulcrum SP Materials Ltd.
Rehovot 7670609 ISR
Share:
Force Indicator displays tension or compression.
Portable Model LK performs force measurement and calibration in tension and compression up to 10,000 lb, with repeatability of 0.2% FS. It operates on dual 9V batteries, making it suitable for use in remote locations or on shop floor. It can be panel mounted with 110 Vac or 11-32 Vdc power. It has 4-1/2 digit LCD display with field selectable engineering units, Hi/Lo capture that displays highest...
Read More »
Diode Laser outputs 7W of power.
OEM single-stripe diode NIR laser can be used in direct-diode thermal, medical, and industrial applications, or serve as pump source for neodymium-based (Nd:), diode-pumped, solid-state lasers. Rated at 7 watts CW, 500-micrometer broad-area emitter device has typical drive current of less than 8A and compliance voltage less than 2V. Spectral width is typically less than 2.5 nm, FWHM, and beam...
Read More »WMS Selection Tool compares vendors side by side.
Advanced Warehouse Management System (WMS) RFI v6 speeds up software selection process by asking questions about warehousing issues and scoring vendor responses. It has 900 questions and scorecard that holds up to 7 side-by-side vendor responses. Scorecard provides analysis with weighted scores and 2 weighted summary analyses. Full Question Text function prints full text of all questions. This...
Read More »
Digital Tachometer measures by contact and non-contact.
Model PLT-5000 pocket tachometer measures up to 100,000 rpm. For non-contact sensing, it uses laser to measure rpm at distances up to 5 ft from target. For contact sensing, it uses adapter for measurements on shafts or journals up to 10,000 rpm. Instrument also measures length in m, ft, yards and in., and speed in m/min, fpm, yards/min, and ipm. Up to 14 readings are stored in memory, including...
Read More »Scanning System publishes drawings on Internet.
Scan-to-CAD v5 includes IDEAL 40 in. wide monochrome scanner with scanning, indexing, intelligent raster editing, and network viewing software. Once drawings are scanned, users can view images using web-browser, and edit raster images in same manner as editing vector images. Search and replace capabilities recognize arbitrary raster symbols, and match them against predefined templates....
Read More »Punching Machine has -
TRUMATIC 2010 Rotation offers hydraulic punching head; all-tool, 360 degree rotation; brush tables; and 50 x 50 in. working range. ToPs Light CAD/CAM software lets users create programs offline or at machine. Through use of Multitool punching tools, number of available tools can be expanded up to 100. Stroke rates are 2,200/min for marking/beading and 900/min for punching (at 0.040 in. pitch)....
Read More »
Speed Reducers withstand corrosive environments.
All-Stainless Steel Speed Reducers, with horsepower ranges through 5 HP, are available in frame sizes 918, 921, and 926 with quill-type 56C, 140TC, and 180TC NEMA C-face inputs. Construction consists of 304 cast stainless steel housings, covers, and shafts; stainless steel hardware; O-ring sealed C-face; and Mobile SHC 634 synthetic lubrication. Pressure compensation chamber prevents internal...
Read More »
Splicing/Ironing Machines have in- or off-line designs.
Opti-Splice(TM) 1000 & 2000 machines utilize ultrasonic energy to splice (1000 series) then iron (2000 series) material to form continuous runs of fabric that accommodates any width. Ironing creates smooth, unobtrusive joint that increases seam strength. Portable and self-contained, equipment can be used on multiple lines for end-to-end web splicing. Both Opti-Splice(TM) 1000 and Opti-Splice(TM)...
Read More »
Protective Eyewear offer 9.75 base curve.
StarLite eyewear has dual curvature lenses made of scratch-resistant, impact-resistant, hard-coated polycarbonate that meet ANSI Z87.1 standards. Lenses filter out 99.9% of UV-A and UV-B light, making eyewear suitable for outdoor work environments. It is available in various lens colors including gold, silver, blue, and indoor-outdoor clear mirror as well as clear, gray, amber, and clear anti-fog.
Read More »
Circular Cold Saws cut steel without leaving burrs.
Saws use various levels of automation, from mechanical stops to Allen Bradley CNC controls. All models have 2 self-centering, infeed vises for length control. Cut length is controlled by positive micrometer adjusted mechanical stop or servo motor. All models are available with spindles for cutting steel or non-ferrous materials. Material is clamped on both sides of cut to eliminate hanging burrs.
Read More »