SEVAAN GROUP Pty Ltd
Minto AUS
Share:
BR Series
The BR series is designed in a modular structure which accommodates a wide range of ratios, input and output flanges, multi-disk brakes, accessories and customized solutions. The gears are manufactured in 18 NiCrMo 5, then carburized, hardened, and tempered. The shafts are in a case hardened alloy steel or hardened and tempered high alloy steel; depending on the size. The housing is constructed...
Read More »Data Storage Product Services help keep data center running.
When data center problems occur, Advance Exchange Program ensures backup system is performing again with minimal downtime. Service provides same day shipment of replacement products, including tape drives, autoloaders, libraries, and hard drives. Consultation with technicians will offer solution for any issues surrounding replacement or repair of defective systems. Diagnostics, disassembly of...
Read More »High Voltage Power Systems operate in local or remote mode.
Providing positive or negative polarity, BT Series is comprised of single-channel units with output voltages from 0-100 V to 0-6 kV, power levels from 0-100 mW to 0-6 W, and universal input from 85-264 Vac. Each AC-DC benchtop model houses high-voltage power supply from microsize/micropower product line. Units include output-voltage display, power grid input, tight line/load regulation, overload...
Read More »Cable Management Straps can be custom printed.
Available in sizes from Ã-¾ x 6 in. to 1.5 x 26 in., Y Series(TM) Cord-LoxÃ-® Straps organize random cables into neat bundles while minimizing excess strapping. Y ends overlap each other to hold cable, while long end wraps around entire cable and then back onto itself. Incorporation of hook-and-loop material throughout entire length of straps ensures they stay in place until removed. For...
Read More »
Feed Through Terminal Blocks offer tension clamp connection.
Available in 4 ratings from 22-63 A, 750 V YBK series has DIN rail mount design and comes in widths from 5-10 mm. Products accommodate 22-12, 22-10, 22-8, 20-6 AWG wires, depending on model, and suit applications involving control panel and electrical panel wiring in chemical, plastics, and packaging industries. Available accessories include end plates, end brackets, cross connectors, and marking...
Read More »
Reciprocating Saws are 19 in. long and weigh 7.3 lb.
Powered by 12 A motor, SAWZALLÃ-® Recip Saw Model 6509-31 features 3/4 in. stroke length to provide control in tight areas, while Model 6519-31 has 1 1/8 in. stroke length for more aggressive cuts in heavy demolition. Both feature gear protecting clutch that extends gear and motor life by absorbing high impact forces and Quik-LokÃ-® blade clamp for tool-free blade changes. Delivering...
Read More »
Water Purification Systems target laboratory market.
Designed to produce ASTM Type I water, LaboStar purifies water from pre-purified water source, while LaboStar TWF purifies water from tap feed source. Both analytical-grade deionization systems include positively charged 0.2 micron sterile filter, which allows production of ultrapure water with endotoxin levels less than 0.001 EU/ml. For applications that require low TOC levels, both systems are...
Read More »
Variable Color Digital Printers mark and decorate products.
Combining digital and piezo-electric technologies, InDecs(TM) UV Single Pass and InDecs UV Flatbed printers create abrasion-resistant markings. Single-pass inkjet, rated to 50 fps, decorates products using grayscale printheads, while in-line UV curing and UV inks enable single-, spot-, or full-color decorating. Featuring scanned image application, UV flatbed printer offers limitless color...
Read More »Panel Drive is available from 10-150 hp at 460 Vac.
Pre-wired and pre-tested, Model DCS800-EP includes all required peripheral components on space-efficient back panel, ready to be mounted into industrial enclosure, facilitating procuring, mounting, and wiring of individual system components. Drive includes AC and DC fusing, AC contactor, and control transformer. With 65 kA short-circuit current rating, Model DCS800-EP meets UL 508A, is suitable...
Read More »Stretch Blow Molding Machine features all-electric design.
Suited for custom blow molders of PET containers, 5-cavity Model L515 makes 1.5 L containers at rate of 7,000/hr, and can also be used to run 1-cavity and 2-cavity molds for production of 2-4 L containers. Neck sizes range up to 43 mm. Hydraulic-free, convertible reheat machine features servo-driven electric stretch rods, 50-ton servo-driven mold clamping system, and servo preform indexing...
Read More »