SEVAAN GROUP Pty Ltd

12 Reaghs Farm Road
Minto AUS

Expandable CS-1 Sifter Increases Capacity

Sifter Parts & Service, Inc., Wesley Chapel, FL, is the current manufacturer of the stacked deck Model CS-1 Gyratory Sifter, formerly known under the names of Allis Chalmers, Ferrell Ross, and Blount. The CS-1 Sifter is an all metal machine capable of providing from one to four separations of any dry product from 1/4 inch down to 400 mesh. This sifter has the ability to screen up to 50,000 pounds...

Fasteners & Hardware

CyberLock Electronic Lock System Offers Affordable Access Control

Corvallis, Oregon, January 12, 2009-The CyberLock Electronic Lock System, manufactured by Videx, offers a powerful, full-featured access control solution for schools with key control problems and concerns about who has access to their buildings. With CyberLock, schools have the opportunity to implement an affordable system that is easy to install and can quickly provide the physical security and...

Laboratory and Research Supplies and Equipment

Pyrogen Free Serological Pipets are non-cytotoxic.

RNase-, DNase- certified 50 mL serological pipets are made from virgin polystyrene. There are forward and reverse 0.5 mL graduations with printed volumes at 1 mL intervals and negative graduations to -5.5 mL. Accuracy is Ã-

Fluid & Gas Flow Equipment

Hermetically Sealed Gas Booster is UL-listed.

Featuring customizable outlet positioning, external motor wiring, and sliding tank housing, ETTER Natural Gas Booster (ENGB) is capable of volumes in excess of 120,000 ICFH, and static gains in excess of 41 in. WC. Cool Flow Technology(TM) maximizes cooling effects of gas stream by providing axial, 360Ã-

Electronic Components & Devices

SS Electrodes are designed for welding in all positions.

SelectAlloy 312-AP and SelectAlloy 316H-AP, austenitic stainless steel, 2 flux cored electrodes, are available in dia of .045 and 1/16 in. With metal composition of 30% chromium, 9% nickel and 0.1% carbon, SelectAlloy 312-AP produces two-phase weld metal with ferrite in austenitic matrix which makes weld metal crack resistant. Composed of 19% chromium, 12% nickel, 2.5% molybdenum and carbon...

Fluid & Gas Flow Equipment

Loading Spouts handle any dry, bulk material.

With internal ventilation design, dust free loading spouts capture airborne material. They can handle materials up to 4 in. across in excess of 400 cfm with vertical travel up to 20 ft. Features included are 3/60/230/460 Vac motor, reducer, chain and sprocket drive, molded polyethylene internal stacking cones, RoadStarÃ-® 18 outer shroud and fully wired and enclosed electricals. Units also...

Electrical Equipment & Systems

Quick Die Change Clamps come in sizes ranging from 20-100 kN.

Designed to work with dies with flat edge, PSH C-Clamp forms bracket device when mounted on T-profiled base, which is then manually inserted into slot on bolster or slide. Hydraulically activated clamp can be opened with spring, and clamping height can be individually configured through height of base piece or using custom-sized spacer.

Fluid & Gas Flow Equipment

Oil Lubricated Screw Compressor is rated at 350 hp.

Available in standard pressures of 8, 10 and 13 bar, Model S 341 Oil Lubricated Screw Compressor is suited for large compressed air users. Output capacities range from 1,119-1,441 cfm, and GM drive system along with multi-function regulation allows valve-less oil circuit, eliminating need for oil stop valve or check valve.

Electrical Equipment & Systems

Compact Seal fits into smaller spaces.

Suited for fitting into standard O-Ring grooves or dynamic applications with limited space, TurconÃ-® Roto VL SealÃ-® is intended for constant service in situations where there are rotary, swiveling, or helical movements at medium to high system pressure. This L-shaped Turcon seal, energized by static O-Ring, has non-symmetric, single-acting design that accommodates velocity to 6.5 ft/sec...

Electrical Equipment & Systems

Multi-Purpose Welder operates on single- or 3-phase power.

Offering capabilities for MIG, TIG, or Stick welding, MTS 3500i inverter power source supports wide selection of ferrous and nonferrous alloys in MIG mode utilizing fixed slope and inductance controls. Digital preset of voltage/amperage on all process is accessible on front panel, while switch on back panel provides selection of primary voltage. Unit features adjustable arc force, Touch Lift...