Aprima Medical Software, Inc
Carrollton, TX 75006
Share:

New Energy Recovery Ventilator Uses G5 Generation of Exchange Core
EV series premium is designed with on/off airflows of 90, 130, 200, 240, 300 and 450-CFM. Available with fan efficiencies of 140-CFM at 0.70-ESP and 160-CFM at 0.65-ESP. Comes with two MERV-8 filters that are factory-installed for the return and outdoor air.
Read More »
New Energy Recovery Ventilator Uses G5 Generation of Exchange Core
EV series premium is designed with on/off airflows of 90, 130, 200, 240, 300 and 450-CFM. Available with fan efficiencies of 140-CFM at 0.70-ESP and 160-CFM at 0.65-ESP. Comes with two MERV-8 filters that are factory-installed for the return and outdoor air.
Read More »
New Sack Tipping and Feeding Station Integrates with Sifters, Mixers and Pneumatic Conveying Systems
Enable food, chemical, pharmaceutical and other processors to safely dispense bagged powders into the process or into storage. Self-contained units combine an integrated exhaust fan and cartridge filter system that help draw the bulk material from the bag into the unit and away from the operator. Bag break station features an integral bag rest platform, protective barrier grid, inspection port...
Read More »
New Sack Tipping and Feeding Station Integrates with Sifters, Mixers and Pneumatic Conveying Systems
Enable food, chemical, pharmaceutical and other processors to safely dispense bagged powders into the process or into storage. Self-contained units combine an integrated exhaust fan and cartridge filter system that help draw the bulk material from the bag into the unit and away from the operator. Bag break station features an integral bag rest platform, protective barrier grid, inspection port...
Read More »
New ECOTECH Taurus 180ES 70 Printer Provides Cutting Edge Technology
ECOTECH taurus 70” 180E and the ECOtech Taurus 126” 320E prints on banner, mesh, vinyl, perforated vinyl, canvas, textile and polyester fabric. Feature high capacity bulk ink systems that include 1 liter CMYK inks and 500 ml reserve cartridges along with front heaters and drying fans. ECOtech taurus 180ES features 2 Epson DX5 printheads and boasts Production Print Speeds of 301 sq.ft/h and...
Read More »
New ECOTECH Taurus 180ES 70 Printer Provides Cutting Edge Technology
ECOTECH taurus 70” 180E and the ECOtech Taurus 126” 320E prints on banner, mesh, vinyl, perforated vinyl, canvas, textile and polyester fabric. Feature high capacity bulk ink systems that include 1 liter CMYK inks and 500 ml reserve cartridges along with front heaters and drying fans. ECOtech taurus 180ES features 2 Epson DX5 printheads and boasts Production Print Speeds of 301 sq.ft/h and...
Read More »
New CAS BACnet Stack Supports DS-COVP-B and DS-COVM-A/DS-COVM-B
COVProperty allows for BACnet client to subscribe to a specific property of a BACnet object. COV multiple allows for BACnet client to subscribe to multiple BACnet objects in a single message. Offers subscribe COVProperty that adds the subscribe COVProperty service and subscribe COV multiple.
Read More »
New CAS BACnet Stack Supports DS-COVP-B and DS-COVM-A/DS-COVM-B
COVProperty allows for BACnet client to subscribe to a specific property of a BACnet object. COV multiple allows for BACnet client to subscribe to multiple BACnet objects in a single message. Offers subscribe COVProperty that adds the subscribe COVProperty service and subscribe COV multiple.
Read More »
New GFCI Receptacle Testers to Test Circuit Wiring and Connected Electrical Devices
ET100 can pinpoint wiring faults in NEMA 5-15 receptacles used in residential and commercial sites. ET200 line splitter can be used with a clamp meter to measure current loads up to 15 A without splicing wires or other modifications that permanently alter a device’s power cord. Enables a clamp meter to capture direct current readings for typical current loads while an X10 position can be used...
Read More »
New GFCI Receptacle Testers to Test Circuit Wiring and Connected Electrical Devices
ET100 can pinpoint wiring faults in NEMA 5-15 receptacles used in residential and commercial sites. ET200 line splitter can be used with a clamp meter to measure current loads up to 15 A without splicing wires or other modifications that permanently alter a device’s power cord. Enables a clamp meter to capture direct current readings for typical current loads while an X10 position can be used...
Read More »