Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Modular Coaxial Connectors offer 2, 3, or 4 ports.
CoSMID 75 ohm, surface mountable connectors incorporate plastic housing that can be plated and molded into various configurations. They feature 1.0/2.3 coaxial interface to CECC 22230 with typical reflection factor of less than 0.1 up to 500 MHz. Units can be processed through normal reflow soldering processes at temperatures up to 473Ã-
Read More »Protector Caps cover exposed ends to prevent worker injury.
Used around construction sites, PC-110 BarGardÃ-® caps protect workers from serious injury from exposed rods, rebar, pipe-end, and stems. They meet CAL OSHA Standards and fit Rebars No. 3-8, 3/8 to 1 in. dia. Products are bright lime green in color for visibility and withstand varied weather and temperature conditions. They install by slipping on and locking into place.
Read More »Proximity Sensors operate with 20-253 Vac or 20-300 Vdc.
Two-wire Capacitive Proximity Sensors have adjustable range from 2-25 mm, and switching frequency of 25 Hz Ac or 40 Hz dc. Housings are M30 or 34 mm diameter smooth barrel, metal, PBT, or PTFE. All units are switchable from Normally Open to Normally Closed with turn of screwdriver on rear of sensor, and can be reversed for future use. Sensors are IP67 rated, short circuit and overload protected,...
Read More »Non-Contact Sensors perform distance and level monitoring.
Miniature analog output ultrasonic sensors, available in M12 x 1 x 70 mm tubular enclosure or 15 x 20 x 49 mm rectangular housings, are sealed to IP67. Features include external teach-in capability and invertible output function that allows users to select rising or falling output slope appropriate to specific application. They offer 20-200 mm sensing range, narrow sonic beam angle of 6Ã-
Read More »Liquid Drainer is pneumatically operated.
Model ADP-1 features press-to-test actuator for compressed air service. It is automatically operated, does not waste air, and includes 100 oz see-through reservoir. Suited for draining oil/water separators, low profile unit mounts on base-mounted compressors, remote cooler packs, refrigerated air dryers, and filters.
Read More »Dock Lifts are offered with up to 6,000 lb capacity.
Available in 10 lift models with capacities from 5,000-6,000 lb, T2000 Series offers platform sizes from 6 x 8 ft to 8 x 10 ft. The 8 in. lowered height allows them to be installed in pit or on top of ground. They come equipped with 5 hp power unit, bridge, hand rails, push button control, and safety leg for servicing unit.
Read More »Card Edge Connectors accommodate 0.062 in. daughtercards.
Right-angle, high-density, double-row Card Edge Connectors feature 1 mm centerline spacing with more than 50 signals per linear inch. Units have selective gold plating and hairpin bellow contacts. They offer signal contact current rating of 1 A and daughtercard engagement force of 1.5 N per contact. Devices are provided in contact configurations from 2/4 to 50/100 in single increments, and may be...
Read More »Pressure Transmitter suits level control industry.
Submersible hydrostatic pressure transmitter series CTU8000CS offers level measurement for ranges from 0-5 to 0-30 psi or 0-10 to 0-70 ft of water. It consists of stable pressure sensor elements in stainless steel housings. With OD of 0.86 in., series is temperature-compensated and supplies 4-20 mA output signal. Cable with integrated vent tube allows true reference pressure to sensor element,...
Read More »Indexing Part Sorting Table suits loose piece manufacturing.
Indexing Part Sorting Table has 78 in. dia turntable and tooling for 6 loose piece containers. Operation is controlled via part count totalizer, bin location sensor, and indexing motor. It counts parts up to preset number, then indexes to next container and resets part count total. Options include vision inspection systems, PLC controlled sorting systems, conveying systems, and packaging systems.
Read More »Powder Vacuum Receiver conveys PVC compound.
SeriesÃ-³ 2423 handles free flowing granular, powder, regrind, and pelletized materials. It features filter area with automatic cleaning for fine powders and cartridge that contains 50 ftÃ-² of spunbond polyester media. Stainless steel check valve allows multiple receivers to draw material from common conveying line. Carbon steel unit available with controls suited for use with...
Read More »