Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Automated Positioning Stage fits in 10 x 40 x 10 mm envelope.
Model LC-9.5 consists of aluminum base and carriage containing 2 rows of precision ceramic ball bearings that are separated by stainless steel retainer and roll between 2 steel raceways on either side. Compression spring between Delrin lead screw nut and end of base produces preload on nut that provides anti-backlash properties. Stage offers straight line accuracy of 0.0005 in. per in. or 0.01 mm...
Read More »Software suits high-speed, high-frequency applications.
HFSS v9.2 generates and manages electromagnetic-based design libraries through native HFSS User Defined Primitives. UDPs provide for customer-specified geometric constructs and user-customizable libraries of parts. Software provides addressable 3D designs through access to 3 GB of memory on Windows-based PCs. It offers seamless 3D electromagnetic, circuit, and system co-simulation with Ansoft...
Read More »Propylene Glycol System offers ESFR protection in freezers.
System K25 utilizes K25 ESFR Pendent Sprinklers and pre-mix of propylene glycol antifreeze and water. It protects up to Class II Storage Commodities in buildings up to 40 ft high with racked storage up to 35 ft. System requires minimum starting pressure of 40 psi and has maximum volume of antifreeze solution of 1,100 gallons. It provides alternative to in-rack sprinkler systems for protecting...
Read More »Vacuum Motors suit forming and casting applications.
Commercial-grade, VC Series Motors survive pressures as low as 10-6 torr and are available as stepper, hollow-shaft, brushless servo, or rotor nut motors. They are temperature-rated at 130Ã-
Read More »Servo System facilitates setup and operation.
Model S200/AKM, comprised of Kollmorgen S200 servo drive and AKM servomotor, features SMARTFeedbackDevice that allows one connector and cable to provide system power and feedback. Its 800 Hz velocity loop bandwidth eliminates servo loop tuning, while 24-bit resolution feedback and 3-5 kHz current loop bandwidth provide smooth motion and rapid start and stop action. Motors, potted and IP65 sealed,...
Read More »UV Wand System is suited for spot curing adhesives.
Loctite ZETA 7735, designed for Ã-¼-1 in dia spot curing applications, offers up to 7 W/cmÃ-² of UV light at 250-410 nm. It uses 50 W metal halide arc lamp with universal power supply and liquid-filled light wand. Lamp, which features elliptical reflector and custom coating, has 2,000 hr life expectancy. System may be operated manually or with timed shutter light exposure from 0-99.9 sec....
Read More »Tooling System facilitates fast tool changes.
NEXT Insert Tooling System for Trumpf presses features interchangeable, abrasion- and adhesion-resistant punch inserts that install into insert punch holders. Holders combine functions of punch shank and alignment ring into single assembly. Punch inserts with diagonal dimensions from 0.036-1.181 in. are M4 high-speed steel, while inserts with diagonal dimensions over 1.181 in. are M2 high-speed...
Read More »LED Lamps replace incandescent 1383 R12-styled lamps.
Series BL630 and BXL630 have 15 mm single-contact bayonet base, draw 2.4 W, and feature 30 incandescent white LEDs. Series BL630 is 2.58 in. long, while Series BXL630 is 3.58 in. long. Both are rated 12/14 Vdc standard, with other voltages available as special order. Integrated current-limited resistors prevent short-circuiting. Suited for elevator cabs, cabinets, and recessed lighting...
Read More »Welding Wires have lubricating surface treatment.
SuperArc copper-coated wire and SuperGlide MIG bare wire feature MicroGuard Ultra(TM) lubricating surface treatment, which reduces spatter and creates stable arc. Treatment improves feeding by reducing friction and guards against worn contact tips and liners, plugged drive roll grooves, and kinked wire guides. It also eliminates wavy appearance that can occur as wire bumps or lurches through gun...
Read More »Wire Feeder suits high-production shops.
Semi-automatic Model LF-72 is available in base model, standard-duty bench, and heavy-duty bench model that can accept up to 60 lb spools. Feeder can accommodate .023-1/16 in. MIG wire diameters and .035-5/64 in. flux-cored wire diameters at feed speeds of 50-800 ipm. Two-roll, Universal Wire Drive System is made of die-cast aluminum for consistent wire feeding. Model LF-72 includes 400 A...
Read More »