Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Ironworker has 5 built-in stations and 85 ton capacity.
Fully integrated FI 8510-20M is equipped standard with electric remote foot pedal and punch stroke and job controls. It also incorporates 6 x 6 x Ã-½ in. angle shear, rod shear that will shear 1 3/8 in. round and 1Ã-¼ in. square rod, and rectangular notcher that can notch 3 x 5 x Ã-½ in. Its 10 in. throat depth can punch 1 1/16 in. hole in 1 in. material, and 20 in. flat bar shear...
Read More »
Blank Washer Rolls are optimized for harsh environments.
Suited for situations requiring cut and abrasion-resistance, VNP11a rolls address requirements of low oil film control and de-oiling in severe-duty applications where elevated roll forces and irregular materials are being processed. Products are made of orange-colored VNP11 non-woven cover material and feature porous and open structure that is able to be pressed to 94-shore-A while maintaining...
Read More »
Plasma Cutting Torch upgrades HD3070 plasma systems.
Model XT(TM)-300 provides high-precision cutting on Ã-½ in. metals including stainless steel, mild steel, aluminum, and non-ferrous material. Cuts have sharp edges with little or no dross, smooth cutting edge surface, and small heat-affected zone. Keyless consumables cartridge can be installed or changed without changing torch head. With a couple of twists, rapid engagement retaining collar...
Read More »
Angle Seat Valves offer line pressure range of 0-290 psig.
Constructed of bronze and 316 stainless steel with TeflonÃ-® seals, Series SAV-BT provides on/off solution for most gas, liquid, and steam applications. Fully configurable units come with full 360Ã-
Read More »
Motor Drives are CSA certified.
Drivert 1000 and Drivert 300 provide powers up to 1 kW and 300 W, respectively. Both feature DSP technology for sinusoidal brushless servomotors with resolver. Units include 15 inputs and 8 digital outputs, 2 analog inputs and 2 analog outputs, plus 1 I/O for simulation or encoder tracking. Mininvert 370-740 static frequency converters drive small 3-phase motors with power from 10-740 W....
Read More »Portable Label Printer allows users to label in the field.
IDXPERT(TM) Handheld Labeler combines die-cut labeling needed by electrical and voice/data users with high-visibility, continuous tapes needed by facility and safety users. It prints characters up to 1.25 in. on label stock up to 1.5 in. wide. It can also provide print as small as 7-point text on any labeling job. QWERTY and ABC keyboard layouts are available with more than 100 labeling options...
Read More »
Pressure Gauges range from vacuum to 15,000 psi.
Available in diameters from 23 mm to 4Ã-½ in., AshcroftÃ-® Commercial Pressure Gauges are offered in variety of configurations including sealed case, liquid filled or dry, back or bottom connection, and custom dials. Features such as PowerFlex(TM) extended life movement, FlutterGuard(TM) pointer stabilization, and True Zero(TM) indications help make gauges suited for applications where...
Read More »
Air/Gas Flow Sensor features integrated Fieldbus interface.
Model SS 20.60 offers measuring range up to 160 m/s and delivers values in Kg/hr or mÃ-³/min. Fieldbus interface makes it suited for large installations with high number of sensors. Bus cabling is fed through screwed cable glands and is wired internally via screw terminals. Applications include combustion-air control in gas, coal or oil burners; volume flow measurements in nitrogen or other...
Read More »
Flow Sensor detects flow direction.
Thermal Insertion Sensor, Model SS 20.400, measures flow velocity of air and gas in both directions with ranges of 1, 2.5, 10, and 20 m/s. Measuring 9 mm in dia, stainless steel tube contains microprocessor-based electronics, and aerodynamic chamber prevents stress on sensor element. Offering reaction times down to 10 ms, sensor provides 1 analog output and 2 digital outputs for indication of...
Read More »
Outdoor Lighting Fixtures are UL-listed for wet locations.
Wall- and post-mount fixtures in 3311 Series feature spherical, blown-glass shades with marblesque appearance. Fixtures, crafted with powder-coated, die-cast aluminum wall and top fitters and brackets, are available in graphite, white, and black finishes. Able to accommodate 75 W incandescent lamp, both styles measure 12Ã-¼ in. tall. Wall-mount unit is 11 1/8 in. wide, while post-mount unit...
Read More »