Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Silicon Oscillator is offered in ThinSOT package.
With footprint limited to ThinSOT(TM) package and one resistor, LTC6906 silicon oscillator can be programmed to any frequency between 10 kHz and 1 MHz. Clock chip for portable equipment has operating current of 18 Ã-µA @ 100 kHz, startup of 200 Ã-µsec @ 1 MHz, and duty cycle control of 50% Ã-
Read More »
Set-Top Box Chip provides MPEG decoder for SD TV.
Built using 0.13 micron technology, STM5105 offers unified, single-device platform for various set-top boxes in worldwide Free-to-Air satellite, cable, and terrestrial services. It integrates common functional blocks, such as audio DACs and VCXO, and supports all features of STi5518. Decoder has integrated 2D graphics engine, supported by blitter-based display; DVB descramblers, DVB-CI, and...
Read More »
Power Line Filter have compact, dual-stage design.
With max current ratings from 3-30 A, CORCOM EMC series addresses need for additional differential mode attenuation in lower frequency range. Filters help reduce conducted noise to acceptable limits for equipment that must comply with requirements of CISPR in Europe as well as FCC specifications in United States. UL/CSA/VDE-approved series is available with Ã-¼ in. FASTON terminals, wire...
Read More »PCI Universal Time Interval Counters have 3U form factor.
With 14 pre-defined measurement functions, GC22x0 Series features internal clock source, programmable ARM source, and microprocessor. Model GC2210 measures frequencies from DC to 225 MHz with 9-digit resolution, while GC2220 measures from DC to 1.3 GHz with 100 pS resolution. Each input channel is programmable for 1 Megohm or 50 ohm input impedance. Able to determine any frequency to 0.1 ppm in 1...
Read More »
CompactPCI Single Board Computer offers I/O flexibility.
With 3U form factor, CPCI-7506 integrates PentiumÃ-® M or CeleronÃ-® M processor with 400 MHz FSB and internal SVGA controller. Front panel I/O includes 2 USB 2.0 ports, 2 optically isolated RS232/422/485 serial ports, one SVGA port, and PS/2 connection. Rear I/O support includes 2 USB 2.0 ports, two 16550-compatible TTL level serial ports, and one parallel port. Along with dual Gigabit...
Read More »
Hot-Fill PET Bottles have panel-less, ribless design.
Suited for 16 and 20 oz applications, PowerFlex(TM) hot-fill polyethylene terephthalate (PET) bottles mimic aesthetics, performance, and feel of glass. Products, adaptable to many shapes, have completely smooth label panel free of any kind of ribbing. Straight wall has no points of stress concentration, which removes potential for bending. Vacuum distortion occurs only in base, where diaphragm...
Read More »Application and Add-On Kits provide Bluetooth functionality.
RabbitCore Modules, bundled with A7 Engineering's BluetoothÃ-® Radio feature, provide users with reliable wireless solutions for Bluetooth, Wi-Fi, and GPRS/GSM. Bluetooth capability can be added to existing applications that are based on select versions of the RabbitCore and Z-World single board computers (SBCs) by using Bluetooth Add-On Kits.
Read More »
Heavy-Duty Incremental Encoders have 250 g shock rating.
KÃÆ'Ã-¼bler 2 in. incremental shaft (T8.5000) and hollow shaft (T8.5020) encoders are available with speed ratings up to 12,000 rpm and frequency response to 300 kHz. With optional shaft seal, they provide IP 67 level protection for harsh factory automation applications. Die-cast aluminum encoders, offering resolution up to 3,600 ppr, are offered with optional M12 eurofastÃ-® quick...
Read More »ATM Network Module suits telecommunications systems.
Featuring line traffic management that supports CBR and VBR, Telum 1001-DE DS3/E3 ATM network adapter supports full-duplex ATM DS3/E3 port for protocol data unit sizes as small as 2 cells. IPMI microcontroller subsystem initializes board-level parameters and monitors board voltage and temperature while maintaining system status. Channel and Digital Service Unit provides line alarm conditions and...
Read More »
Fittings offer single-barb design.
Pneu-Edge(TM) fittings feature sharp, single-barb design that provides tight grip and seal. Precision machined barbs ensure permanent tubing installation without need for clamps. Straight connectors, tees, elbows, crosses, and couplings are available to accommodate various fluid handling circuits.
Read More »