Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
PharmaJet Blender Dryer is equipped with blower.
Drying blenders and tanks up to 150 cu-ft using forced air, PharmaJet Blender Dryer reduces wait times. Suitable for pharmaceutical industry, unit allows quicker reuse of blenders and eliminates alcohol wipe downs. Maximizing production time, blending capacity, and facility safety, product also dries parts, tank exteriors, walls and floors.
Read More »
PRO-Fit is used for copper and aluminum tubing.
Consisting of non-corrosion coated five bell-shaped flaring bits designed for 6, 7.5, 12, 16, 19 mm tubing, PRO-Fit™ Precision Flaring Kit comes in 19 x 28 x 5 cm plastic carrying case with interior foam organizer with cutouts sized to fit respective bits. Featuring ¼ in. diameter hex-shaft and ¼ in. hex chuck, kit is provided with four-color 7.5 x 11 in. instruction sheet.
Read More »
PRO-Fit is used for copper and aluminum tubing.
Consisting of non-corrosion coated five bell-shaped flaring bits designed for 6, 7.5, 12, 16, 19 mm tubing, PRO-Fit™ Precision Flaring Kit comes in 19 x 28 x 5 cm plastic carrying case with interior foam organizer with cutouts sized to fit respective bits. Featuring ¼ in. diameter hex-shaft and ¼ in. hex chuck, kit is provided with four-color 7.5 x 11 in. instruction sheet.
Read More »
Wireless Flow Transmitter comes with internal high capacity lithium battery.
SFS-WP Intrinsically Safe Wireless Flow Transmitter can be configured between five seconds to one hour check-in intervals. Integrated with TRG turbine or JV-CG or JV-KG positive displacement flow meter, unit sends data through Modbus to a Gateway. Featuring passive inductive flow sensor and radio nodes are powered by lithium battery, transmitter’s ISM bands sustain radio signal strength up to...
Read More »
Wireless Flow Transmitter comes with internal high capacity lithium battery.
SFS-WP Intrinsically Safe Wireless Flow Transmitter can be configured between five seconds to one hour check-in intervals. Integrated with TRG turbine or JV-CG or JV-KG positive displacement flow meter, unit sends data through Modbus to a Gateway. Featuring passive inductive flow sensor and radio nodes are powered by lithium battery, transmitter’s ISM bands sustain radio signal strength up to...
Read More »X11 SuperBlade® Systems come with remote management software.
Supporting up to 20x 2-socket servers, 10x 4-socket servers or 20x Xeon® Phi based servers, X11 SuperBlade® Systems are optimized with 100 ns latency. Featuring integrated Battery Backup Power modules, units deliver maximized 100 Gb/s throughput. Compatible with 1x 100G Intel® OPA, 100G EDR InfiniBand switch and 2x 10G/25G or 4x 25G Ethernet switches, system is equipped with 20x...
Read More »X11 SuperBlade-® Systems come with remote management software.
Supporting up to 20x 2-socket servers, 10x 4-socket servers or 20x Xeon® Phi based servers, X11 SuperBlade® Systems are optimized with 100 ns latency. Featuring integrated Battery Backup Power modules, units deliver maximized 100 Gb/s throughput. Compatible with 1x 100G Intel® OPA, 100G EDR InfiniBand switch and 2x 10G/25G or 4x 25G Ethernet switches, system is equipped with 20x...
Read More »
Retracting Micro Pins come with rap coupler integrated pneumatic cylinder.
Suitable for small, lightweight parts with minimal side load, Retracting Micro Pins can be used with and without backup. Featuring anodized aluminum construction and weld spatter resistant coating, units are available in 3-12 mm diameter and come with weld-field immune solid state switch.
Read More »
Retracting Micro Pins come with rap coupler integrated pneumatic cylinder.
Suitable for small, lightweight parts with minimal side load, Retracting Micro Pins can be used with and without backup. Featuring anodized aluminum construction and weld spatter resistant coating, units are available in 3-12 mm diameter and come with weld-field immune solid state switch.
Read More »
The Best Solution for Easy Automotive Rubber Assembly
There are an amazing number of rubber parts in a single automobile. It can be mindboggling to think of the various rubber components that are involved in the assembly of a car. O-rings, bushings, seals, hoses, engine mounts, belts, gaskets…any number of chassis, engine and suspension components are made of rubber or plastic. Rubber is naturally slip resistant, making it difficult to work with...
Read More »