Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
High Pass Filter ranges from 9,700-15,000 MHz.
Housed in 3.2 x 1.6 mm EIA 1206 package, 50 Ω Model HFCN-103+ integrates 7 high pass sections in SMT chip form factor. Device features ceramic construction, power handling capability of 8 W, and typical stop bandÃ- rejection of 30 dB. Systems that previously relied on large distributed filter elements to support these lower frequencies can save space and system complexity by integrating...
Read More »
Container Unscrambler suits limited space applications.
Integrating into existing filling, capping, and decorating equipment, Model NEHCP-32 is equipped with bulk supply hopper elevator that delivers steady stream of containers to orienting bowl. System offers optional integrated ionized air rinser and is available using all FDA-approved components. Compact unscrambler is suitable for pharmaceutical, personal care amenities, nutriceutical, and other...
Read More »
Datalogger Software meets monitoring and alarming requirements.
PC-based configuration and analysis solution, SiteView, ties together features of Accsense VersaLog monitoring and alarming devices. With its graphic interface, data visualization and presentation solutionÃ- facilitates setup for recorders and enablesÃ- logging across sampling time range of 20 msec to 12 hr. To accelerate downloads, SiteView supports communication speeds up to 115,200 bps...
Read More »
Wireless Logger monitors illuminance, UV, temperature, humidity.
Operating on one AA battery, 4-channel RTR-574-H can store up to 32,000 readings taken via One-Time or Endless recording modes. Temperature measurement accuracyÃ- is Ã-
Read More »
Paddlewheel Flow Sensor works with pipe sizes from 3-40 in.
Available in brass, PVC, or stainless steel, Series IPFS (Insertion Paddlewheel Flow Sensor) includes hot tap model withÃ- bronze or stainless steel valve assembly. Bearings are made from ruby jewel to reduce coefficient of friction and maintain accuracy. Rotation of impeller is used to measure flow, and various saddle fittings come in iron or brass. Compatible with clean liquids, series...
Read More »
Spring-Loaded Connectors feature .100 in. above board profile.
Suitable for board-to-board or device-to-board connections, single row Series 815-22-0XX-30-001101 is available in 2–32 positions, while double row Series 817-22-0XX-30-001101 comes in 4–72 positions. RoHS-compliant connectors feature mid-stroke travel of .012 in. and full stroke of .024 in. Spring-loaded pins, rated for 1 million cycles, have current rating of 2 A continuous and 3 A max....
Read More »
Motor Management Relay includes arc-flash light sensor.
Using standard motor thermal management, overcurrent protection, and integrated arc-flash detection, Model SEL-849 protects equipment and personnel in low- and medium-voltage motor control centers. Unit features 4 contact outputs,Ã- 6 opto-isolated control inputs, EIA-232/EIA-485 port, and Ethernet 10/100 BASE-T port. With 2.8 x 5 x 6 in. form factor andÃ- current input of 0.5–128 A,...
Read More »Clock Buffer and Divider IC delivers extremely low jitter.
Housed in 24-lead LFCSP package, 1.65 GHz Model AD9508 delivers low jitter of 41 fs across 12 kHz to 20 MHz band. Device has 4 dedicated output dividers with bus-programmable division and phase delay, and automatic synchronization. Dividers also have pin-strapping capability for hardwired programming at system power-up. Operating from -40 to 85Ã-
Read More »
Non-Contact Position Sensor combines small size, high resolution.
Featuring proprietary induction technology principle, Blade20 micro sensor allows measurement of linear and shallow-arc motion as well as long-stroke measurement. Solid-state sensor, sealed to IP68 to prevent dust or water ingress, features 2-part modular construction that assists engineers in retrofit applications. Technology offers 12-bit resolution capable of data sampling at speeds up to 15...
Read More »
SMT Printer features boom style dual squeegee head.
Featuring benchtop design, PrinTEK Ultra-Fine Pitch PrinterÃ- has dual squeegee structure and drive mechanism with 4-bar linkage,Ã- enabling main squeegee head, gantry, and squeegees to be smoothly pushed back.Ã- Two digital cameras areÃ- mounted on pantograph style articulating arms, allowing focus and orientation of cameras to remain fixed while they are moved in position....
Read More »