Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Southco Introduces R4-20 Rotary Latch That is Offered with an Integrated Plastic Knob
The Hand Actuated R4-20 Rotary Latch is available in through-hole, metric and imperial mounting styles in single or two-stage latching. The product comes with steel construction and is suitable for applications such as hidden access panels and doors on transportation and industrial equipment. The latche’s plastic knob eliminates the need for separate cable and actuator.
Read More »
KNF Introduces NMP830 Gas Pump That Produces a Pressure of Up to 3.0 psig
The NMP830 HP Gas Pump is designed for use in patient monitoring, wound and compression therapy, and respiratory care devices. The product is offered in a width of 31 mm and produces a free flow up to 5.5 L/min (single head) and 10 L/min (dual head). They are available with brushed and 2- or 4-wire brushless DC motors and produces vacuum down to 28.4 inHg.
Read More »
KNF Introduces NMP830 Gas Pump That Produces a Pressure of Up to 3.0 psig
The NMP830 HP Gas Pump is designed for use in patient monitoring, wound and compression therapy, and respiratory care devices. The product is offered in a width of 31 mm and produces a free flow up to 5.5 L/min (single head) and 10 L/min (dual head). They are available with brushed and 2- or 4-wire brushless DC motors and produces vacuum down to 28.4 inHg.
Read More »
Latest CMD292 Distributed Driver Amplifier Features a Positive Gain Slope Over Frequency
The CMD292 Distributed Driver Amplifier delivers a gain of 13 dB with a corresponding output 1 dB compression point of +27 dBm. It delivers an output IP3 of +33 dBm at 15 GHz. The device is suitable for applications requiring broad bandwidth, high output power and high linearity.
Read More »
Latest CMD292 Distributed Driver Amplifier Features a Positive Gain Slope Over Frequency
The CMD292 Distributed Driver Amplifier delivers a gain of 13 dB with a corresponding output 1 dB compression point of +27 dBm. It delivers an output IP3 of +33 dBm at 15 GHz. The device is suitable for applications requiring broad bandwidth, high output power and high linearity.
Read More »
Aerotech Launches GL4 Scanner Controllers That Use Advanced Interpolation Electronics
The GL4 Scanner Controllers are designed for long-thermal stability and micron-level tracking accuracy. The unit offers 192 kHz servo rate and resolution up to 26-bits. They come with infinite field of view and zero-tracking error for eliminating speed-related part distortion like necking on circles and rounding of corners. The controllers are offered with fiber-optic interface and onboard...
Read More »
Aerotech Launches GL4 Scanner Controllers That Use Advanced Interpolation Electronics
The GL4 Scanner Controllers are designed for long-thermal stability and micron-level tracking accuracy. The unit offers 192 kHz servo rate and resolution up to 26-bits. They come with infinite field of view and zero-tracking error for eliminating speed-related part distortion like necking on circles and rounding of corners. The controllers are offered with fiber-optic interface and onboard...
Read More »
Walter Presents DC150 Perform Drill with 140 Degrees Point Angle
The DC150 Perform 5 x Dc Solid Carbide Drill can be used with all materials and broad range of workpieces. The unit is suitable for use applications where small and medium batch sizes need to be machined with high process reliability. The DC150 line included length to diameter ranges of 3, 5, 8, and 12 x Dc. It is designed to be used with or without internal coolant.
Read More »
Walter Presents DC150 Perform Drill with 140 Degrees Point Angle
The DC150 Perform 5 x Dc Solid Carbide Drill can be used with all materials and broad range of workpieces. The unit is suitable for use applications where small and medium batch sizes need to be machined with high process reliability. The DC150 line included length to diameter ranges of 3, 5, 8, and 12 x Dc. It is designed to be used with or without internal coolant.
Read More »
C&K Introduces SMT D-Sub Connectors with CS-FR053 Specification
The SMT D-Sub Connectors are constructed from single part of machined aluminium shell. The units are designed to minimize PCB layout and are suitable for aerospace engineering applications such as developing communication and network ports for satellites, spacecraft and launchers. They conform to European Space Agency and ESA/European Space Components Coordination standards.
Read More »