Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Infrared Thermometers have laser guide for accurate sighting.
Models CA870, CA872 and CA876 non-contact infrared instruments measure temperature in -
Read More »
Brazing/Soldering Machine is designed for small assemblies.
Rotary Index 100 is 36 in. wide by 48 in. deep and operates at rates between 100 and 200 parts per hour, depending on assembly mass and configuration. Brass, copper, steel, stainless, and aluminum can be joined on machine. Unit is equipped with clear, acrylic guarding on 3 sides. It requires 120 VAC, natural gas or propane, 80 psi air, water and drain.
Read More »
Case Sealer can convert to 2 in. or 3 in. tape requirements.
Little David Random Legend Series Case Sealer uses pressure sensitive tape to seal top and bottom of boxes. It tapes boxes ranging from 3 to 24 in. high, 4 1/2 to 22 in. wide, and from 3 in. in length. Side and lock leg extensions accommodate conveyor heights from 22 1/4 to 32 1/4 in. Sealed drive system and CaseLocker ST cartridge require no lubrication. Sealer features single mast design with...
Read More »Analyzer checks amount of water in oil.
H20il Analyzer System for upstream and midstream operations offers continuous measurement of water from 0 to 100%. Knowing and controlling water/oil content improves efficiency of oil recovery, maximizes oil quality by improving dehydration process, and minimizes transport of water. System is available in 2 to 8 in. models, all with FM approval. Applications include well testing, flow station,...
Read More »
Skid Steer boasts bucket breakout of 11,600 lb.
Model 280 has 90 hp 4045T turbo-charged engine and servo-controlled hydrostatic 4WD transmission. Two-speed transmission is also available. Vertical lift provides precise center load placement and efficient truck loading. It has dump height of 127 in. Boom cylinders are cushioned for smooth machine operation. Triple interlock requires operator to be in seat with seat belt fastened and parking...
Read More »
Hand-Held Computer provides real-time control.
PCL-486 has ROM-DOS 6.22 operating system for real-time capability, 8 Mbyte Dynamic RAM, 2 Mbyte Flash memory, and serial port that can be configured for RS-232, RS-422 or RS-485. Its 192 x 128-pixel LCD provides crisp, high-contrast images even in full sunlight and is capable of both text and graphics. Keypad surface is securely framed and clamped into place for splash resistance and to prevent...
Read More »
Hammer Drills have high torque.
Cordless models 3870-04 18 V and 3670-04 14.4 V have 450 and 425 in.-lb of torque, respectively. Their 17-position clutches allow user to control torque level for specific applications and to select drill or hammer mode. Each tool has two-speed gear train, which provides 450 or 1500 rpm and creates powerful hammer action, delivering 0 to 5,000 and 0 to 17,500 BPM. By changing bit, they provide...
Read More »
Leak Catcher diverts fluid to containers or drains.
Flexible hanging vinyl funnel enables Pipe Leak Diverter to capture up to 7 gallons of water from leaky pipe, then send liquid via high-density polyethylene hose coupling. It has 18-in. dia top opening to cover large leak areas, heavy 18 oz. coated vinyl construction, and built-in eyelets and 4 bungee cords to make it easy to hang from overhead pipe. Top opening is reinforced by metal grommets.
Read More »Steel Turning Grades increase tool life.
KC9110 and KC9125 have coating bonding technology that can apply 3 main layers and several sub-layers of coating with total thickness of 18 microns. Grade KC9110 is ISO class P10 grade for finishing operations while Grade KC9125 is P25 class grade for universal machining on all types of steel. Both have coatings 25 to 75% thicker than company's conventional coated carbides and increase...
Read More »
Assembly Press builds and tests at same station.
Servo controlled, ball screw assembly press and measuring system can be used for production, off-line testing, lab development work, and training and back up. It has built-in on-board force and distance sensors, plus encoder-equipped servo motor, so it can simultaneously monitor and control force and position. It can press to force/position, then test parts such as springs, check valves, shock...
Read More »