Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Pneumatic Vacuum Conveyor Offers Both Lean and Dense Phase in Same System
Volkmann VS Conveying System Can Switch to Suit Different Materials Bristol, PA: The Volkmann VS pneumatic vacuum conveying system from process equipment manufacturer Volkmann USA, Bristol, PA (https://www.volkmannusa.com/), automatically transfers bulk materials in a choice of lean phase or dense phase using the same conveying system. Featuring a designed-in ball valve in the feeding elbow, the...
Read More »
Flexible, Thixotropic, One Component Dual Cure Epoxy
Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms. It cures readily within 20-30 seconds when exposed to a UV light source emitting a wavelength of 320-365 nm. The adhesive can also undergo a secondary heat curing for shadowed areas, typically curing in 60-90 minutes at 80-85°C. The system's adaptability to varying depths...
Read More »
SCHURTER Classic Power Entry Module With Circuit Breaker Gets Even Better
Santa Rosa, California, November 28th, 2023 – SCHURTER series DG11 and DG12 with and without mains filter features a first-of-its-kind ingress protection solution for IEC inlets, consisting of a seal gasket between the connector and mating V-Lock power cord. The blue colored latch of the V-Lock power cord and blue inlay of the appliance inlet indicate that the two have been equipped to provide...
Read More »
Power Supplies 30-75 W Quarter Brick DC-DC Converters Feature Very Wide Input Ranges for Rail and Industrial Applications
TDK Corporation (TSE:6762) announces the introduction of the 30 to 75W rated TDK-Lambda PYQ series of quarter brick footprint DC-DC converters. Capable of operating from an ultra-wide 12:1 input of 14 to 160Vdc (PYQ50) or 8:1 input of 9 to 75Vdc (PYQ750, the converters are compatible with 12V, 24V, 48V, 72V, and 110Vdc nominal system voltages. Applications include railroad rolling stock and...
Read More »
Type E Bearings Will Protect Your Application Against Costly Downtimes
NTN’s Bower Type E mounted bearing units are designed to better support your demanding applications that experience misalignment, heavy loads, contamination or excess vibration. These demanding applications require rugged seal protection to keep your equipment up and running. The Bower Type E is protected by a double lip contact seal that keeps contamination out and allows for grease purge...
Read More »
Widest Ever Choice of Metcase Combimet 19 Rack Cases
COMBIMET is now METCASE’s largest and most popular range of 19 rack cases with original, open-top, smooth/solid-top and super-deep versions. COMBIMET is METCASE’s most advanced and most cost-effective 19" enclosure. Applications include networking, communications, sound/studio systems, laboratory instruments and industrial computers/control technology. These smart aluminum enclosures have a...
Read More »
Metallic Ladder Introduces Specialized Aero Ladder for Aircraft Maintenance
Metallic Ladder introduces specialized Aero Ladder for aircraft maintenance Randolph, N.Y. – October 16, 2023 – Metallic Ladder has introduced the Aero Ladder, a high-quality, American-made aluminum specialty aircraft maintenance ladder for mechanics to reach electrical equipment bays, pylon panels, wheel wells, and other hard-to-reach areas on aircraft like the Boeing 777 and McDonell...
Read More »
SCHURTER Customized Wire Harness Solutions
Santa Rosa, California, November 14th , 2023 -- SCHURTER is pleased to announce its wire harness solutions with ready-to-connect cables, cable bundles and complete wire harnesses with connectors, contacts, or wire-end sleeves. Wire harnessing requires a special electrical engineering know-how to ensure end-to-end quality of product installation and performance. SCHURTER’s widespread offering of...
Read More »
12V Output 2040W 3-Phase Industrial Power Supply Operates from 400/440/480VAC Delta and Wye Inputs
TDK Corporation (TSE 6762) announces the addition of the TDK-Lambda brand TPS4000-12 power supply, further extending the existing 3kW to 4kW rated TPS series. Delivering up to 2040W output power (12V at 170A) in a 2U high package, the TPS4000 series operates from a wide range Delta or Wye 350 - 528Vac three phase input. These industrial power supplies are ideal for use in many applications...
Read More »
Great Lakes Barcode Introduces the New addition of the QX-870 Laser Barcode Reader
Brooklyn Park, MN – 6/11/2023 – Great Lakes Barcode, a leading provider of automation solutions, today announced the addition of the QX-870 laser barcode reader. The QX-870 is a high-performance, rugged barcode reader that is ideal for a wide range of industrial applications, including manufacturing, logistics, and healthcare. The QX-870 features a wide field of view and can read barcodes...
Read More »