Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
OPC Server Software connects company to third-party applications.
AIM DA and HDA software can access and share data with any OPC-compliant application to simplify exchange of information. DA provides access to real-time object data in I/A Series control system via UNIX or Windows NT-based workstations. HDA provides access to AIM Historian and helps users retrieve item attributes (data type, instance, high/low range), aggregate data (average, standard...
Read More »
Fluorescent Light shines from top to bottom.
HBS100 series industrial fluorescent fixture illuminates horizontally and vertically, eliminating shadows on high warehouse shelves. Luminance does not significantly degrade, delivering consistent light over entire 20,000-hour life span. Unit can replace HID luminaries in warehouses and factories. It is available in 3, 4, or 5 lamp configurations and open strip, with wire guard, or with...
Read More »
Water Unions feature widely spaced ball bearings.
6000 Series Water Unions feature cartridge seal that allows on-machine replacement with no need to remove hose connections or use special tools. Repair can be conducted by removing 6 hex bolts and end cap, removing cartridge seal and rotor seal face, and replacing. Unions have balanced mechanical seal with carbon against tungsten carbide seal faces for reduced friction and wear. Widely spaced...
Read More »
Infrared Thermometers have laser guide for accurate sighting.
Models CA870, CA872 and CA876 non-contact infrared instruments measure temperature in °F and °C. They have 3-1/2-digit backlit LCD display, auto-hold function and auto power off. Model CA876 includes type K thermocouple for taking temperature measurements in areas not suitable for infrared. It also offers MIN and MAX recording, LO and HI alarm, and adjustable emissivity from 0.1 to...
Read More »
Brazing/Soldering Machine is designed for small assemblies.
Rotary Index 100 is 36 in. wide by 48 in. deep and operates at rates between 100 and 200 parts per hour, depending on assembly mass and configuration. Brass, copper, steel, stainless, and aluminum can be joined on machine. Unit is equipped with clear, acrylic guarding on 3 sides. It requires 120 VAC, natural gas or propane, 80 psi air, water and drain.
Read More »
Case Sealer can convert to 2 in. or 3 in. tape requirements.
Little David Random Legend Series Case Sealer uses pressure sensitive tape to seal top and bottom of boxes. It tapes boxes ranging from 3 to 24 in. high, 4 1/2 to 22 in. wide, and from 3 in. in length. Side and lock leg extensions accommodate conveyor heights from 22 1/4 to 32 1/4 in. Sealed drive system and CaseLocker ST cartridge require no lubrication. Sealer features single mast design with...
Read More »
Torque Sensors are designed for low torque applications.
STS2220 rotary shaft torque sensors are available in capacities from 1.0 to 10.0 Nm. They feature one-piece outer housings and pre-lubricated bearings, and accept either AC or DC excitation voltage for compatibility to most readout instruments. Units have 1.5 mV/V nominal output at rated capacity, bridge resistance of 350 ohms, maximum speed of 10,000 rpm, and non-linearity of +/- 0.1% of full...
Read More »
Three-Chip Camera provides digital output.
IK-TU51 3 CCD camera provides 10-bit digital signal, eliminating need for frame grabber. It is suitable for machine vision, microscopy and broadcast applications. Camera has digital signal processors, RGB analog output, interchangeable 1/2 or 1/3 in. remote heads, broadcast-level resolution of 800 TVL, 6-vector color-enhancement circuitry, and pulse triggers. HAD CCDs improve camera sensitivity...
Read More »
Multiple Stage Valve is suitable for vacuum systems.
Compact ILP two-stage valve includes pneumatically-actuated poppet valve and bypass valve in single unit that fits into tight space constraints found in vacuum applications, such as loadlock and transfer chambers in semiconductor or optical processing. Soft start process reduces turbulent flow during initial vacuum system evacuation, for less product contamination and damage. Heater jacket is...
Read More »
Thermal Printers produce bar codes, text and graphics.
200 Series line of thermal/thermal-transfer printers handle pressure-sensitive labels and tags in sizes from 3.54 to 8.8 in. wide and 20.0 to 39.0 in. long. Print speeds range from 4 to 12 in./sec, with print resolutions of 203, 300, or 600 dpi. Labels may be printed one at a time, in strips, or in large batches. Optional feature rewinds labels inside unit in preparation for automatic...
Read More »