Aprima Medical Software, Inc

Single Board Computer supports DDR SDRAM interface.
Computer Hardware & Peripherals

Single Board Computer supports DDR SDRAM interface.

IBC 2802 6U single slot CompactPCI® peripheral master and PICMG 2.16 compliant server blade delivers Low Power Mobile Tualatin Pentium® III performance, 266 MHz double data rate (DDR) SDRAM, and Copperhead(TM) top-end server chipset. It also offers Coppertail(TM) Server Chipset, Gigabit and 10/100 Ethernet ports, and stand-alone Satellite operating mode. Chipset supports 64-bit/66MHz...

Read More »
Application Terminal is rated NEMA 4x/6.
Electrical Equipment & Systems

Application Terminal is rated NEMA 4x/6.

ID7E+2000 stainless steel waterproofed terminal with 1.3 in. BigWeight(TM) display is suitable for weighing systems. Designed for use with analog and high precision bench and floor scales, IN7E+2000 comes with 1 analog and 1 high precision scale interface. In addition, RS232 and keyboard interfaces are standard. Available as bench-top or wall-mount version, up to 3 scales can be connected, and 6...

Read More »
Circular Cold Saws employ various degrees of automation.
Machinery & Machining Tools

Circular Cold Saws employ various degrees of automation.

All circular cold saws have positive hydraulic clamping, utilizing 2 self centering infeed vises for precise length control. Cut length is controlled by positive micrometer adjusted, mechanical stop or servo motor. All models are available with low speed spindle for steel or high speed spindle for non-ferrous cutting. Material is clamped on both sides of cut to eliminate hanging burrs. Maximum...

Read More »
EEPROMs adhere to VESA's E-DID 1.3 Standard.
Computer Hardware & Peripherals

EEPROMs adhere to VESA's E-DID 1.3 Standard.

With 256 x 8-bit dual-mode serial EEPROM, 24LC22A and 24LCS22A implement both DDC1(TM) and DDC2(TM) operating modes, including recovery to DDC1. They offer 2-wire serial interface bus, ESD protection greater than 4000 volts, and operating range of 2.5 to 5.5 V. Model 24LCS22A provides software-enabled hardware write protection pin to write-protect memory contents automatically during in-circuit...

Read More »
Grinding Wheels utilize durable bond posts.
Fluid & Gas Flow Equipment

Grinding Wheels utilize durable bond posts.

Norton NorPor(TM) controlled-porosity, open-structure grinding wheels create more chip clearance, decreasing possibility of wheel loading and burning of part, in wet and dry grinding applications. They are available in 4 abrasive types: White 38A, Pink 25A, Ruby 48A, and Purple 3SGR; and 3 shapes: Type 1, Straight; Type 5, Recessed 1 Side; and Type 7, Recessed 2 Sides.

Read More »
Tooling System punches accurately.
Machinery & Machining Tools

Tooling System punches accurately.

XimmiX(R) heavy-duty H-Series tooling can punch up to 0.250 in. thick mild steel with hole location accuracy of +/-0.005 in. or better. Tooling operates on bump-die principle, so no die set or ram attachment is required. It is suitable for square sheared blanks or strip stock and is adaptable to coil-fed applications. Components such as corner posts and tool holders can be reused as new jobs are...

Read More »
Inverter powers arc-welding systems.
Electrical Equipment & Systems

Inverter powers arc-welding systems.

Power-Master(R) 500P, with 560 A dc output, is suitable for most welding applications. 24 factory-preset pulse programs facilitate matching size and type of wire to pulse welding applications. Programs are available for mild steel, stainless steel, aluminum, nickel alloys, and silicon bronze. Inverter switches between weld processes, such as gas tungsten, shielded metal, gas metal, and pulsed gas...

Read More »
Self-Aligning Pipe Couplings facilitate installation.
Electronic Components & Devices

Self-Aligning Pipe Couplings facilitate installation.

Tuf-Lok ring-grip couplings work in high-pressure applications up to 500 psig, or in full vacuum-rated systems. Couplings install easily on plain-end pipe, regardless of pipe wall. Couplings are self-grounding, vibration resistant, and leak-proof. No machining or grooving is required to maintain pipe integrity. Gasket materials are available to meet food-grade, high-temperature, and special...

Read More »
Pumps suit multi-line systems.
Fluid & Gas Flow Equipment

Pumps suit multi-line systems.

Models 205 and 215 Multiline Pumps have high operating pressures and may be used as central pump in medium to large progressive systems. Both work in temperatures from -48 to 176 deg F, pump oil or grease up to NLGI #3, and have optional ultrasonic level control. Pumps include housing with motor, reservoir with stirring paddle, and pump element. Model 205 is available with 1-5 pump elements,...

Read More »
Lubrication Systems allow remote user control.
Fluid & Gas Flow Equipment

Lubrication Systems allow remote user control.

Quicklub® QLS 301 (grease) and QLS 311 (oil) automated lubrication systems include pump and integrated lubricant metering device. Systems allow for remote programming or remote manual run. They are available in 24V direct current models that monitor, or in 120V alternating current versions with no monitoring. Housed in NEMA 4 rated enclosures, QLS 301 and QLS 311 are suited for temperatures...

Read More »

All Topics