Aprima Medical Software, Inc

Stepper Drives come in 220 Vac models.

Stepper Drives come in 220 Vac models.

Offering self-test and auto setup features that measure and configure motor parameters, STAC6 Drives provide software-selectable resolutions from 200-51,200 steps/rev at speeds up to 50 rps. Demand Signal Smoothing reduces extraneous resonances, while Torque Ripple Smoothing adjusts current waveform to minimize low speed torque ripple. Control options include intuitive graphical programming...

Read More »
Dual 14-Bit ADCs suit industrial and military applications.

Dual 14-Bit ADCs suit industrial and military applications.

Optimized for low-noise applications, ADSD-1420S and ADSD-1420S-EX are functionally complete, 14-bit resolution, dual sampling ADCs that offer 20 MSPS sampling rate with no missing codes over respective temperature ranges of 0 to +70Â-ºC and -55 to +125Â-ºC. Edge triggered modules have Â-

Read More »
Step-Down DC/DC Converter offer pin-selectable output.

Step-Down DC/DC Converter offer pin-selectable output.

Supplied in 2 x 2 mm DFN-6 package, LTC3563 synchronous buck regulator delivers up to 500 mA continuous output current. Output voltage is pin-selectable to 1.28 or 1.87 V, making it suited for Agere cellphone baseband chipsets. Using constant frequency and current mode architecture, unit operates from 2.5-5.5 V input and has 2.25 MHz switching frequency. Use of internal switches with RDS(ON) of...

Read More »
Mill suits grinding of soils or frozen yeast cells.

Mill suits grinding of soils or frozen yeast cells.

With volume up to 190 ml, Mortar Grinder RM 200 features setting of pestle pressure and scraper position, push fit mortar and pestle for exchange of grinding sets, as well as digital timer and load control display. It handles soft, hard, brittle, and pasty samples with particle size up to 8 mm, and grinds using pressure and friction for homogenization and mixing of sample. Unit has grinding sets...

Read More »

Weigh Feeders handle dry bulk materials.

Better-WeighÂ-® Continuous Feeders allow gravimetric feeding of dry bulk materials where it is necessary to determine actual feed rates on loss-of-weight basis. Available in 7 models with feed rates from 1-550 cu ft/hr, units provide feeding in batch mode or continuous mode. Standard features include platform or level balance scale, sealed tactile keyboard, 7-digit numerical keyboard,...

Read More »

Adhesive is suited for building insulation applications.

Used for making rolled goods for metal buildings industry, BondmasterÂ-® 40-453A is formulated copolymer emulsion adhesive that bonds foil, scrim, kraft, and other facings to fiberglass insulation. Able to be roll coated, extruded, or air sprayed, this 54% solids adhesive has 800 cps viscosity and formulation that promotes wet tack and product life expectancy. Tack reduces slippage of poly or...

Read More »

High-Temperature Coating protects to 1,112-

Developed for parts and equipment in power generation, aviation, chemical, refinery, and offshore drilling industries, CortecÂ-® VpCI(TM)-371 protects against corrosive attack and metal fatigue brought on by extreme heat. Single-component, air cure coating offers aluminum appearance without any hard settling of aluminum. Its 9H pencil hardness helps resist abrasion from grit, sand, and rocks....

Read More »
Antiscalant Product offers multi-metal corrosion protection.

Antiscalant Product offers multi-metal corrosion protection.

Designed for cooling towers or closed- and open-loop recirculating cooling systems, S-14 Bio protects carbon steel, galvanized steel, aluminum, copper, and other nonferrous metals from corrosion while also providing anti-scaling control. This 91% biobased, environmentally friendly additive has non-toxic, readily biodegradable formulation and incorporates Vapor phase Corrosion Inhibiting...

Read More »

Modeling Software facilitates jewelry design process.

ArtCAM JewelSmith Designer provides businesses with all capabilities of ArtCAM JewelSmith v9 except machining options. STL output supplies design data to RP machines, and ability to create and edit designs as series of layers facilitates model management and accelerates calculation time. Using Delcam's Total Modeling techniques, software also allows creation of decorations that will be wrapped...

Read More »

Inspection Software works with AIMS Metrology System.

PowerINSPECT is hardware-independent inspection software suited for use in aerospace industry. Compatibility with AIMS enables seamless sharing of CAD geometry, inspection plans, and measurement results between it and other hardware and software platforms. This facilitates introduction of PowerINSPECT alongside any existing inspection system used within organization or along its supply chain. It...

Read More »

All Topics