Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Photo Control turns on lights automatically.
NightStar(TM) electronic roadway twistlock photocontrol provides consistent day to day, season to season, turn on/ turn off control for maintaining critical time of day light levels. It has fully encompassed filtered silicon sensing element and heat dissipating mechanical for standard and high temperature applications.
Read More »
Serial I/O Adapter fits CompactPCI-based computers.
ISO COMM2.cPCI multi-interface I/O adapter provides two individually selectable RS-232/422/485 isolated serial ports that support data rates up to 921.6 Kbps. True port to port optical isolation eliminates effects of ground loop current. It isolates not only signals, but also isolates ports from each other. Auto-enable hardware automatically handles RS-485 driver, allowing RS-485 ports to be...
Read More »Circuit Breaker snaps into place.
Series 1658-F single-pole circuit breaker is available in ratings from 5 to 30 A, making it suitable for AC systems up to 250 V and DC systems up to 28 V. Tripping action is provided by thermally activated disc bimetal. Unit provides interrupting capacity up to 2000 A per UL 1077. It includes push-button manual reset, and trip free mechanism that allows device to safely interrupt overload...
Read More »Alloy Links accept grade 100 and 80 chain.
Master links up to 1 1/4 in. dia accept Coupler links and are embossed with trace code and product code. Load limits for vertical lifts range from 3,360 to 262,240 lbs with 7/16 and 3 1/2 in. links respectively. Alloy master links sub-assemblies working load limits for vertical lifts range from 4,200 to 262,240 lbs. Omegalok(TM) coupler links, available in 9/32, 3/8, 1/2, and 5/8 in. sizes, have...
Read More »
Connector eliminates bent pins.
Power-Edge(TM) PEC Series has edge card interface with 3, 7 or 10 contacts. One-piece interface is rated up to 5 A and has contacts on .100 in. pitch. Built-in card latches increase withdrawal force required for removing power board. Optional alignment pins and locking clips can be provided.
Read More »
DC/DC Converters provide efficiencies above 90%.
V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...
Read More »
Welding Generator is driven by diesel engine.
Trailblazer(R) 301 D boasts 300 A output and 10,000 W peak auxiliary power rating at 104 deg F. Multi-process, CC/CV machine provides 20 to 300 A dc output for Stick, TIG, MIG and Flux Cored welding. It also provides 35 to 225 A of ac current at 60% duty cycle for TIG welding. Generator is powered by 18.8 hp Kubota diesel engine that idles immediately when started. Welding arc is not affected...
Read More »
Screw Feeders have USDA approved seal.
Model DB1 Volumetric Screw Feeders feature rear seal made of Teflon(R) braids and bronze pusher, allowing use in sanitary applications. They utilize only 5 moving parts to produce metering accuracy of +/- 1 to 1 1/2%. Units are constructed entirely of steel and offer compound screw arrangement that ensures all flights of metering screw are filled to maximum capacity with uniformly dense material.
Read More »
Separation System suits septage, food, and pulp products.
SPIRALIFT(TM) SR receives, screens, and separates solids from liquids. It incorporates fine screening shaftless screw system, spray wash, optional press zone, and integrated controls. System is housed in stainless steel tank enclosure with quick disconnect inlet flange for connection to septage trucks. Automatic inlet valve regulates internal fluid level. SPIRALIFT SR is available with one, 2,...
Read More »
Control Valves suit corrosive environments.
Hi-Cyclic(R) directional control valves are constructed of corrosion resistant solid brass with stainless steel spool. They are available in direct ported or manifold mount body styles with 8 spool configurations in sizes from 1/8 through 1/2 in. NPT or SAE ports. With operating pressure of 3000 psi, valves have max length of 2 1/4 in. and max body height of 2 5/8 in. Unit provides a low...
Read More »