Aprima Medical Software, Inc
Carrollton, TX 75006
Share:

Arc Welder is driven by gasoline engine.
Pipeliner 200G provides 200 A dc at 60 percent duty cycle. It has 5 current ranges with overlap in each range for stick-pipe welding and arc welding processes where slope control is desired. It uses General Motors 3.0 liter, 4-cylinder, water-cooled, industrial gasoline engine with 46 hp at 1,600 rpm. Dc exciter supplies pure dc current to welding generator, and 100 RPM high-idle adjustment...
Read More »
Two-Wire Transmitters mount on DIN rail.
200-Series 2-wire transmitters have 1 3/4 in. dia housing that fits most standard thermocouple heads, or may be surface mounted using two screws. Thermocouple, RTD, potentiometer and millivolt versions are available, including field-rangeable thermocouple and RTD models. It has low-drift circuitry, in-terminal cold junction compensation, Quick Check output LED, and -40 to +80 deg C ambient...
Read More »
Torque Transducer handles rotating loads.
Model 1960 Series rotary transducer is available with circular shaft or square drive and has built in instrumentation amplifier that provides high level output. Features include 150% FS mechanical overload protection, high frequency response of 1000Hz, and 1% accuracy. Temperature operating range is -10 to +65 deg C. Applications include dynamometer stands, web tensioning, viscosity control,...
Read More »
Dissolved Oxygen Meter features self-stirring probe.
Waterproof WTW 340i Series is available in field/lab sets that allow meter to be used for field dissolved oxygen (DO) and lab biological oxygen demand (BOD) measurements. Unit comes with field probe and StirrOx(R) self-stirring BOD probe. Probes can be interchanged and used immediately with no warm-up period required. Meter has automatic calibration, LCD display, real-time clock, RS232 interface,...
Read More »
Gearheads have no backlash.
Lightweight PSA-G harmonic drive gearheads provide zero-backlash speed reduction for accurate angular positioning. Input-to-output gear ratios from 50:1 to 100:1 are available. They handle high axial and overhung loads, making them suitable for automation applications such as robotics and handling small components in assembly process. Maximum radial shaft loading is up to 115 lb. Gearheads are...
Read More »
Shredder destroys paper, computer media, and more.
Model 200 shredder disintegrator reduces paper to particles less than 3/32 X 3/32 in., exceeding Department of Defense standards. It has rotary knife mill, with two knives mounted on solid steel rotor and two knives on stationary bed. As rotor spins, waste is continually cut by knives until it is small enough to fit through 3/32 in. steel screen. Shredder can also destroy CDs/DVDs, floppy discs,...
Read More »
Specialty Fluids suit metalworking and metalforming.
Signature line includes: OAKFLO(TM) fluids for machine tools and metalworking; OAKFORM(TM) stamping and drawing fluids for metalforming applications; OAKWASH(TM) aqueous cleaners for in-line spray washers, vibratory and deburring systems, and general maintenance cleaners; OAKTEC(TM) corrosion inhibitors, available in solvents, oil, and synthetics; and OAKSPEC(TM) specialty fluids and lubricants.
Read More »
Barrier Curtain protects operators from lasers.
Opaque LP200 Laz-R-Barrier curtain protects against accidental and chronic occupational skin and eye exposure resulting from reflected laser radiation and broadbeam optical radiation generated by laser plume. Its fabric is flexible, drapable, can be made into most curtain sizes and shapes, and has grommets along one width side. ANSI laser symbols are clearly marked on curtain's outside surface....
Read More »
6U Workstation suits harsh environments.
Shock- and vibration-resistant OptiMation has Intel Pentium III up to 1 GHz and Celeron(R) 566 MHz processor, up to 768 MB SDRAM, 10-slot backplane that accommodates 8 expansion slots; 4 PCI full-size and 4 ISA full-size. Workstation has 5.25 in. drive bay, 3.5 in. drive bay and internal HDD. Front-accessible drives accept FDD/CD-ROM, CD-RW or DVD. OptiMation has 12 in. XVGA display and C-drive...
Read More »
High Speed Encoders come in standard package.
Model H25(R) has pre-loaded, dual ABEC 7 bearing assemblies that allow encoder to operate at speeds to 30,000 rpm. Available in industry-standard 2.5 in. dia package. Applications include machine tools with high spindle speeds, and testing high speed motors and turbines.
Read More »