Aprima Medical Software, Inc

CompactPCI(R) Platform supports Linux, Solaris and Windows.
Computer Hardware & Peripherals

CompactPCI(R) Platform supports Linux, Solaris and Windows.

Low profile eFUZION-4U/C line includes models CEP, CHP and CES. CEP is 5-slot enclosure with Pentium(R) III single board computer, CD-ROM, floppy, and up to 80GB IDE hard drives; CHP has Dual Pentium III SBC, CD-ROM, floppy, 300W ac power supply and up to 80GB IDE hard drives; and CES Sun-based platform has Sparc Ultra IIe long life cycle SBC, Solaris 8 CD 6 with full I/O hot-swap support,...

Read More »
CompactPCI(R) Computers fit into 8U platforms.
Computer Hardware & Peripherals

CompactPCI(R) Computers fit into 8U platforms.

nFUZION-8U platforms are suitable for high-density server/compute farms, central office based VoIP systems, adjunct processors, SCPs and core network management systems. Line includes EP, HP and ES models. Each has four 200W hot-swap, N+1 redundant ac or dc power supplies, and 8U 14-slot enclosure. Platforms meet requirements of network core, cable head end, telecom central office, wireless...

Read More »
System Management Controller monitors and alarms.

System Management Controller monitors and alarms.

Stand-alone IBC-SMC monitors company's C0814 and C0406A I-Bus enclosures and nFUZION CompactPCI platforms. It resides behind power supply area of enclosure to conserve space. Monitoring is done with four 12C busses, 6 fan status inputs, 7 voltage sensing inputs, and 3 digital inputs. One 12C bus is used for IPMI backplane connectivity conforming to PICMG 2.9 R1.0 specifications. Other 12C bus...

Read More »
Single Board Computer supports DDR SDRAM interface.
Computer Hardware & Peripherals

Single Board Computer supports DDR SDRAM interface.

IBC 2802 6U single slot CompactPCI® peripheral master and PICMG 2.16 compliant server blade delivers Low Power Mobile Tualatin Pentium® III performance, 266 MHz double data rate (DDR) SDRAM, and Copperhead(TM) top-end server chipset. It also offers Coppertail(TM) Server Chipset, Gigabit and 10/100 Ethernet ports, and stand-alone Satellite operating mode. Chipset supports 64-bit/66MHz...

Read More »
Application Terminal is rated NEMA 4x/6.
Electrical Equipment & Systems

Application Terminal is rated NEMA 4x/6.

ID7E+2000 stainless steel waterproofed terminal with 1.3 in. BigWeight(TM) display is suitable for weighing systems. Designed for use with analog and high precision bench and floor scales, IN7E+2000 comes with 1 analog and 1 high precision scale interface. In addition, RS232 and keyboard interfaces are standard. Available as bench-top or wall-mount version, up to 3 scales can be connected, and 6...

Read More »
Circular Cold Saws employ various degrees of automation.
Machinery & Machining Tools

Circular Cold Saws employ various degrees of automation.

All circular cold saws have positive hydraulic clamping, utilizing 2 self centering infeed vises for precise length control. Cut length is controlled by positive micrometer adjusted, mechanical stop or servo motor. All models are available with low speed spindle for steel or high speed spindle for non-ferrous cutting. Material is clamped on both sides of cut to eliminate hanging burrs. Maximum...

Read More »
EEPROMs adhere to VESA's E-DID 1.3 Standard.
Computer Hardware & Peripherals

EEPROMs adhere to VESA's E-DID 1.3 Standard.

With 256 x 8-bit dual-mode serial EEPROM, 24LC22A and 24LCS22A implement both DDC1(TM) and DDC2(TM) operating modes, including recovery to DDC1. They offer 2-wire serial interface bus, ESD protection greater than 4000 volts, and operating range of 2.5 to 5.5 V. Model 24LCS22A provides software-enabled hardware write protection pin to write-protect memory contents automatically during in-circuit...

Read More »
Grinding Wheels utilize durable bond posts.
Fluid & Gas Flow Equipment

Grinding Wheels utilize durable bond posts.

Norton NorPor(TM) controlled-porosity, open-structure grinding wheels create more chip clearance, decreasing possibility of wheel loading and burning of part, in wet and dry grinding applications. They are available in 4 abrasive types: White 38A, Pink 25A, Ruby 48A, and Purple 3SGR; and 3 shapes: Type 1, Straight; Type 5, Recessed 1 Side; and Type 7, Recessed 2 Sides.

Read More »
Tooling System punches accurately.
Machinery & Machining Tools

Tooling System punches accurately.

XimmiX(R) heavy-duty H-Series tooling can punch up to 0.250 in. thick mild steel with hole location accuracy of +/-0.005 in. or better. Tooling operates on bump-die principle, so no die set or ram attachment is required. It is suitable for square sheared blanks or strip stock and is adaptable to coil-fed applications. Components such as corner posts and tool holders can be reused as new jobs are...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers