Aprima Medical Software, Inc

Network Connector puts serial devices on Ethernet.
Controls & Controllers

Network Connector puts serial devices on Ethernet.

FS-R2010-01 FieldServer Remote Serial Port network connector enables various devices to interconnect to Ethernet. It allows serial data to be transported via Ethernet as TCP/IP packets. Also known as tunneling device, it is easy to install. FS-Bridge may be included in system architecture to provide protocol translation for data from multiple FS-RSP nodes. It includes RS232 or RS485 serial and...

Read More »
Diesel Engines meet emissions requirements.
Mechanical Power Transmission

Diesel Engines meet emissions requirements.

Series 1100 diesel engines conform to EU and North America Stage 2/Tier 2 off-highway emissions requirements. Family includes 3.3 liter 4-cylinder engine which is available in naturally aspirated and turbocharged forms with up to 65 hp @ 2100 rpm; Model 1104C-44, rated at 86 hp @ 2400 rpm; and 6 liter, turbocharged, air to air charged cooled 1106C-E60TA which offers 174 hp @ 2400 rpm. Full...

Read More »
Connector System suits wire harness assemblies.
Construction Equipment and Supplies

Connector System suits wire harness assemblies.

Model 4.2 Power Economy (PE) series connector system is suited for wire to wire applications that require 4.2 x 4.2 mm centerline spacing. Plastic connector mates and unmates while maintaining positive-latch design. Unit is available in 2 to 24 positions and accommodates receptacle housing with either panel mount or free hanging plug housing. Connector mates with AMP-DUAC connectors and other...

Read More »
Three Channel Controller can perform 9 functions.

Three Channel Controller can perform 9 functions.

MR13 multi-input, multi-range, user-programmable controller can be used as 3-Zone Controller, Follower Controller, or Cascade Control. It incorporates EXPERT PID, which suppresses hunting caused by overshoot or process disturbance. Where Ramp and Hold Programming is required, optional 9-step option is available. Other optional features include Remote or DI Inputs, Analog Output, or Computer...

Read More »
Minature Linear Guide has removable carriage.
Material Handling & Storage

Minature Linear Guide has removable carriage.

Wide Minirail is available with 14, 18, 24, and 42 mm wide rails and 2 accuracy and preload grades. Minirails are capable of speeds of 5 m/sec and accelerations of 50 m/sec squared. Typical operating temperatures range from -40 to 80 deg C, and short-term temperatures are rated to 120 deg C. Its 2-row ball recirculation system is manufactured from engineered plastic, and provides low translation...

Read More »
Optics & Photonics

Camera has 640 x 480 resolution on 27 micrometer pitch.

Room temperature camera employs 640 x 480 Indium Gallium Arsenide (InGaAs) focal plane array (FPA). Its short-wave infrared (SWIR) scientific imaging system (0.9 to 1.7 microns) suits laser profiling, emission microscopy, and imaging spectroscopy. Digital output (14-bit) can be integrated with LabVIEW(TM) software. Camera features snapshot mode exposure with multiple computer controlled...

Read More »
Materials

Polymer Materials suit electronic applications.

ZYVEX(TM) liquid crystalline polymer circuit materials are designed for flexible circuit applications. RO4350B(R) - R04450B(R) high frequency material system offers 130 deg C Relative Thermal Index (RTI) and UL 94V-0 rating. RT/duroid(R) and TMM(R) Circuit Materials perform over frequencies from 3 to 90 GHz. REFLECTON(TM) white epoxy molding materials withstand high-solder temperatures while...

Read More »
Antenna Rotators position TV/FM antennas.
Material Handling & Storage

Antenna Rotators position TV/FM antennas.

UL/CSA-listed ECG Antenna Rotators have precision cut, hardened-steel gears, one-piece, cast-aluminum housing, for strength in high stress areas, large bearings surfaces, and reinforced mast for lateral load support. Ball bearing is provided for thrust load. Water-tight seal and fully lubricated drive train withstand high winds and harsh weather extremes. Indicator accurately shows orientation of...

Read More »
Coordinate Measuring Machine allows direct computer control.
Controls & Controllers

Coordinate Measuring Machine allows direct computer control.

DCC GAGE(TM) Measurement Station can be used as stand-alone, walk-up station for first piece inspection, layout inspection and tool setup, or as flexible gage. It handles workpieces up to 18 x 20 x 16 in. and offers speed of 305 mm/sec. PC-DMIS PRO(TM) software provides shop-floor graphics interface that guides operators through part programming, setup, and execution of inspection routine. DCC...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers