Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Linear 3.3 V Hall-Effect Sensor IC comes in miniature package.
Intended for applications requiring medium accuracy in small package, A1304 eliminates need to program device to compensate for temperature effects on sensor performance. Sensitivity and QVO TC are blind blown (trimmed) at factory for optimal accuracy, and programmable sensitivity level is 4 mV/G Ã-
Read More »High Power TVS Diodes suit AC and DC power line applications.
With respective standoff voltage ratings of 58 and 76 V, BournsÃ-® Models PTVS15-058C-SH and PTVS15-076C-SH feature high current bidirectional port protection meeting IEC 61000-4-5 8/20 Ã-µs current surge requirements. SMD package lends to reduced peak clamping voltage due to degree of lead inductance, reducing electrical stress on protected circuitry. Providing surge current protection...
Read More »Power Distribution Switchgear protects spot networks.
Designed to assure reliable service to critical and sensitive loads, self-contained PNP Series provides simultaneous connection of load from 2 independent feeders.Ã- Should fault be detected on either feed, vacuum fault interrupter disconnects spot network from fault while providing uninterrupted primary power to load. Offered with 5, 15, and 25 kV ratings in padmount and submersible...
Read More »UPLC System handles nano- to micro-scale separations.
Able to tap potential of sub-2-micron particle technology, ACQUITY UPLCÃ-® M-Class System delivers sensitivity to quantify and to identify vanishingly small concentrations of key molecules. UltraPerformance LCÃ-® (UPLC) systemÃ- handles flow rates fromÃ- 200 nL/min to 100 Ã-µL/min and is available with 15,000 psi-capable columnsÃ- up to 25 cm long that have IDs from 75...
Read More »Multiprotocol PHY IP supports 1.25-12.5 Gbps throughput.
With DesignWareÃ-® Enterprise 12G PHY IP, designers can integrate multiple enterprise protocols, including PCI Express 3.0, SATA 6G, 10GBASE-KR, 10GBASE-KX4, 1000BASE-KX, CEI-6G/11G, SGMII, QSGMII, SFF-8431, CPRI, OBSAI, and JESD204B, into system-on-chips. Analog front-end incorporates power saving features in both active and standby modes. Hybrid transmit drivers support low power voltage...
Read More »In-Ground LED Fixtures offer alternative to HID solutions.
Designed to replace 150 W HID 9.5 and 13 in.Ã- in-ground lighting fixtures, 18 W ActiveLEDÃ-® In-Ground is available in 120, 208, 240, and 277Ã- V ratings andÃ- 2700K, 3000K, 3500K, and 5000K color temperatures to meet desired ambience/safety requirements. Corrosion-resistant, vacuum-sealed light engine combats heat. Products are available asÃ- complete unit with light engine...
Read More »Data Analytics Software helps prevent transformer outages.
Providing utility operators with data on condition of every transformer on fleet, Perception™ v1.14 helps proactively identify risks and facilitates condition-based maintenance program. Pre-defined or user-defined intelligent algorithms automatically evaluate condition of individual transformers and compare conditions to give overall ranking. With customizable CSV import/export function,...
Read More »Glass/Oil Standards address glass refractive index measurements.
Used to calibrate instruments that measure refractive index of microscopic fragments of glass and glass-like materials, Glass Refractive Standards set consists of calibrated glass samples and immersion liquids calibrated for refractive index versus temperature. Materials, designed for compliance with standard test methodology in ASTM 1967, cover 1.4800–1.5400 refractive index range. Also, oils...
Read More »Pull-Type Vise clamps large parts with minimal jaw deflection.
With jaw plates in standard position, HD690 featuresÃ- full 9 in. opening. Combination of AngLockÃ-® and pull-type designs reduces stress in vise body under load, promotingÃ- clamping accuracy. Jaw is rigid and stationary, top-down bolting reduces deflection, and body height reduces clamping stress. Offering clamping force from 975–5,250Ã- lb using 10–80Ã- lb input torque,...
Read More »Weatherproof Floodlights are constructed of 316 stainless steel.
Intended for industrial and marine areas, Areamaster™ Stainless Steel Floodlights have corrosion-resistant design and are imperviousÃ- to saltwaterÃ- and harsh chemicals. Luminaires comply with NEMA 4X requirements and are UL Listed for Class I, Division 2 hazardous industrial locations. Offered in various ballast and voltage configurations, products feature thermal-shock and tempered...
Read More »