Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
![Micropower Op Amps feature offset voltage of 150 -µV.](https://cfnewsads.thomasnet.com/images/medium/540/540622.jpg)
Micropower Op Amps feature offset voltage of 150 -µV.
Built on VIP50 BiCMOS process technology, PowerWise LMP223x Series consumes less than 16 Ã-µW per channel while providing 130 kHz usable bandwidth and TCVOS as low as Ã-
Read More »Cordless Hammer Drill delivers up to 26,800 blow/min.
Weighing 4.4 lb, 18 V lithium-ion Model SBZ18 features torque adjusting sleeve with 5 torque settings, forward and reverse acting motor, and all-metal 1/16-Ã-½ in. keyless chuck. In first gear, drill operates at 0-400 rpm, and in second gear, tool offers speeds from 0-1,450 rpm. Model SBZ18 features drilling capacity of 1 3/16 in. in soft wood, Ã-½ in. in steel, and 3/8 in. in concrete,...
Read More »![Extender Module Tray includes cable management shelf.](https://cfnewsads.thomasnet.com/images/medium/540/540620.jpg)
Extender Module Tray includes cable management shelf.
Designed for rackmount transmitter/receiver modules, which are interconnected via CAT5/5e/6 cable, XTENDEX ST-C5RCK-12 allows up to 12 extender modules to be mounted in 2RU shelf. Tray is equipped with 11 blank front panel covers to hide open slots on tray and to prevent change in airflow through rack cabinets.
Read More »Flame-Resistant Fabric promotes workplace safety, comfort.
Designed for industrial workwear, Amplitude(TM) is constructed of cotton/nylon blend designed to help mitigate potential injuries due to electric arc and flash fire exposure. This flame resistant fabric is processed ammonia-free and promotes freedom of movement through stretch. It offers Hazard Risk Category 2 electric arc protection for NFPA 70E, ASTM F1506, and OSHA 1910.269 compliance as well...
Read More »![Blind Hole Mounted Cable Ties do not need separate mount.](https://cfnewsads.thomasnet.com/images/medium/540/540612.jpg)
Blind Hole Mounted Cable Ties do not need separate mount.
WITBH series can be inserted into threaded, non-threaded, drilled, or punched holes. While barbed mounting head grips to inside of hole, ribs deflect when pushed into hole then spring back for secure lock. RoHS-compliant series, offering 50 lb of tensile strength, comes in standard Nylon 6/6 and Heat Stabilized Nylon 6/6, serviceable to 286Ã-
Read More »![Cable Tie Holder uses pressure to facilitate assembly.](https://cfnewsads.thomasnet.com/images/medium/540/540613.jpg)
Cable Tie Holder uses pressure to facilitate assembly.
Pressure hold cable tie holder Model FTH-33 allows pre-assembly of cable tie into holder and secures it in position. Cupped mounting base prevents dust ingress while providing tight grip to board in environments prone to vibration. Part accepts all Richco QTE-30/50 and WIT-30/50 cable ties.
Read More »![Sheet Metal Edge Fasteners are suited for thin sheets.](https://cfnewsads.thomasnet.com/images/medium/540/540614.jpg)
Sheet Metal Edge Fasteners are suited for thin sheets.
RoHS-compliant SEI series provides strong threads in metal sheets that are too thin to be tapped. Products allow for right-angle assemblies and provide alternate to self-clinching fasteners. With design that reduces necessary hardware, series is installed by rotating in side of panel and can be removed by pinching spring leg and rotating. Series is available with No. 6-32 and M4 internal threads.
Read More »![MERV 8 Filter is classified as green product.](https://cfnewsads.thomasnet.com/images/medium/540/540618.jpg)
MERV 8 Filter is classified as green product.
Designed as value-added upgrade from standard MERV 8s, 30/30Ã-® air filter features radial pleat design that allows full use of all-mechanical media for optimal dust holding capacity. Maintained resistance to airflow and average pressure drop contribute to savings on heating/cooling. Rated to 2.0 in. w.g. without media pack failure, solution has 5-star ECI rating and comes in 2 or 4 in....
Read More »![Micro Driver Drill features 10.8 V lithium ion battery.](https://cfnewsads.thomasnet.com/images/medium/540/540610.jpg)
Micro Driver Drill features 10.8 V lithium ion battery.
Micro driver drill, Model DB10DL, measures less than 6 in. long and weighs 1.8 lb. With 88 lb-in. of turning torque and 21+1 stage clutch, drill can drive 130 three in. screws into wood during single battery charge. Features include battery charger that prevents overheating or power loss, Ã-¼ in. hex chuck that allows for simple bit replacements, and optimized handle dimensions that create...
Read More »DC Power Supply auto-calculates voltage/current limits.
Measuring 11.11 x 3.47 x 6.9 in., Model 9110 automatically recalculates voltage/current limits for each setting and provides 100 W output power in any Volt/Amp combination within 60 V and 5 A limits. Digitally controlled, mixed mode linear/switching dc power supply offers 10 mV/1 mA resolution over full range and can store/recall 4 x 100 groups of preset Volt/Amp values. Along with OC, OV, and OT...
Read More »