Aprima Medical Software, Inc

Software

IC Design Software provides custom parasitic extraction solution.

Used for analog mixed-signal and custom digital IC design, StarRC(TM) combines gold standard Star-RCXT(TM) extraction technologies and Raphael(TM) NXT 3D fast field solver into one unified solution. Tools incorporate technologies such as hierarchical extraction, feature-scale chemical-mechanical polishing (CMP) effects modeling, and variation-aware extraction. Able to accommodate 65 and 45 nm...

Read More »
Electrical Equipment & Systems

Single-Chip PMUs reduce board space in portable electronics.

Supplied in 6 x 6 x 0.4 mm QFN package, TPS65070/TPS65073 power management units (PMUs) implement all sequencing and default options to power processors such as OMAP(TM) and digital signal processors. Each power management integrated circuit integrates three 2.25 MHz, 1.5 A DC/DC step-down converters; two 200 mA LDOs; and 10-bit ADC, and 1.5 A linear battery charger. Other features include I-²C...

Read More »
Architectural & Civil Engineering Products

PV Cell Module suits residential/commercial rooftop systems.

Available in 220 or 225 W power ratings, Wd series 60 cell multi-crystalline PV module weighs ~20 kg and features positive peak power tolerance of 0/+5 W that ensures modules will produce at or outperform nominal power rating. Each is certified to IEC 5400Pa to withstand high wind-pressure and snow load and comes with IP67-rated junction box with thermal isolation, 4 mm thick glass, and 50 mm...

Read More »
Agricultural & Farming Products

Kaba Enters into a Strategic Partnership with PlaSec to Offer the PL-500 Series Access Control Platform Through It's Distribution Network.

Kaba Access Control announced today that they will resell PlaSec's Linux-based PL-500 series platform as they further expand the integration capabilities of Kaba's Card-Connected(TM) E-Plex® 5900 Series door locks and controllers. Used together, the PL-500 series and E-Plex® 5900 series provide simple and scalable access control from 1 to 1000s of doors using ISO 14443A Smart Cards so that...

Read More »
Food Processing & Preparation

Fabtech 2009 Show Releases from J&S Machine

J&S Machine & YLM introduces the new ALL-ELECTRIC CNC-38MS-R-AE rotary bender. The bender features multiple stack tooling capabilities coupled with a fast 180 degree/sec bending head. Feeding speeds up to 50 /sec and rotation speeds to 360 degrees/sec creates a fast dependable bending machine for multiple applications. The advance New Motion bending software allows for sequence programming of...

Read More »
Machinery & Machining Tools

Fabtech Show Preview CR 138 RIMW

Tre C & J&S Machine will be displaying the CR138RIMW; a Windows based CNC roll bender with 2-1/2 capacity. The control is capable of importing dxf formatted files, connecting to a network, displaying the part, and showing a stored profile shapes. The 160 roller rotation speeds and 500 roller location speeds are servo controlled for precision settings and automatic calculations of the 36 radii per...

Read More »
Controls & Controllers

ANT130-L Direct-Drive Linear Stage Offers Long Travel, Smooth Cog-Free Motion, and Nanometer Accuracy

Noncontact, non-cogging, frictionless direct-drive for zero backlash and hysteresis High resolution (1 nm), repeatability (50 nm), accuracy (250 nm), and in-position stability (3 nm) Anti-creep cross-roller bearings Large selection - eight models with travels from 35 mm to 160 mm Aerotech ANT130-L series stages offer best-in-class performance in speed, accuracy, resolution, repeatability,...

Read More »
Electronic Components & Devices

New Liquids Technology Available at Process Expo 2009 in Las Vegas

QUADRO ENGINEERING CORP./WRIGHT FLOW TECHNOLOGIES - BOOTH NO.: 6728, will be showcasing their full range of liquids processing solutions at Process Expo 2009, in the Las Vegas Convention Center (October 5 - 7, 2009). Quadro Engineering Corp. will feature the HV-Emulsifier Series, an innovative rotor-stator mixing device that defines new limits in shear energy and closes the gap in performance...

Read More »
Macro Sensors LVDT Position Sensors Monitor Shell Expansion, Bearing Vibration in Gas Turbines
Sensors, Monitors & Transducers

Macro Sensors LVDT Position Sensors Monitor Shell Expansion, Bearing Vibration in Gas Turbines

Pennsauken, NJ, September 18, 2009...The Macro Sensors HLR 750 Series of ¾ diameter LVDT Position Sensors play an important role in the predictive maintenance of gas turbines as part of process control systems used to monitor shell expansion and bearing vibration. Installed on turbine shells, these hermetically sealed AC-LVDTs measure shell expansion, providing linear output that operators can...

Read More »
ARPAC to Demonstrate Full Packaging Line Integration Capability at Pack Expo Las Vegas Show, Booth #1000!
Computer Hardware & Peripherals

ARPAC to Demonstrate Full Packaging Line Integration Capability at Pack Expo Las Vegas Show, Booth #1000!

ARPAC LP will be making its biennial pilgrimage to Las Vegas next month for Pack Expo. The ARPAC booth will feature three fully integrated packaging lines; a beverage line, a food line, and a pick-to-order fulfillment line. ARPAC manufactures end of line packaging systems consisting of shrink bundling, shrink wrapping, corrugated tray and case packing and pallet stretch wrap systems. The aim,...

Read More »

All Topics