Actions Semiconductor Co., Ltd.

15-1, NO.1, HIT Road, Tangjia, Zhuhai,
Guangdong 519085 CHN

Timing-Belt Kit allows on-site installation.

ATN-® mechanical connection system facilitates rapid belt assembly and disassembly directly at drive set-up. Finger spliced ends have clamping hardware consisting of polyamide inserts, steel plates, and screws. Allowable tensile load for ATN 10 and ATN 12.7 tooth pitch polyurethane belts is up to 337.2 lbs. Kit is available for 50 mm and 100 mm wide belts.

Mechanical Components and Assemblies

EMI-Shielding Gasket holds up in severe environments.

Form-in-place Cho-FormÃ-® 5541 is galvanic-corrosion resistant and provides electrical stability in environments such as urban gas, salt fog, and high temperatures, as well as in high temperature/high humidity cycling. Single-component, electrically conductive, silicone elastomer contains nickel-plated graphite particles. Gasket material provides shielding effectiveness above 70 dB, from 200...

Leak Detection Liquid locates small nitrogen gas leaks.

Leak Detective(TM) detects gas leaks in inaccessible areas of nitrogen gas springs and systems to reduce downtime and ensure continuous operation. It is non-flammable, non-corrosive and non-toxic. Product can be applied to inverted surface and leaves no residue. It is available in sizes from 8 oz to 1 gal.

Flow Meter uses fully automatic transmission method.

Time Delta S Version 3, with wave pattern selector, scans through correlation or standard transit time mode, as many as 7 different transmission patterns until optimum configuration for fluid system is acquired. If process conditions change over time, unit reconfigures itself for optimum ultrasonic-measurement mode. Clamp-on flow meter is available for ultra-pure to moderately dirty or aerated...

Scanner produces up to 125 profiles/sec.

L1 3-D Line Scanner is capable of supplying 3-D profiles across optical line up to 24 in. long. At transport speed of 47.2 in./sec, a new profile is reported every other 0.4 in. L1 has 120Ã-

Fluid & Gas Flow Equipment

Pump supplies significant power in compact arrangement.

Compressed air-operated, reciprocating P923 Series supplies 1 1/2 gpm flow and 3,000 psi pressure directly to D03 manifold through 2-bolt interface. Compact size of finished power unit reduces required plant floor space, number of components, and number of leakage points. Combined pumps supply power on demand, useful in clamping and work-holding circuits, where high pressure is maintained for...

Architectural & Civil Engineering Products

Controller/Driver controls 4 stepping motors at once.

Integrated MCB-4B board simultaneously controls up to 4 stepping motors with mini-step capability, and with 4, 6 or 8 leads and up to 3 amp phase current. Each axis is addressable, and several boards can be controlled by single computer communication port. MCB-4B offers stepping rates up to 50,000 step/sec and up to 16.7 million steps per move. It includes programmable acceleration/deceleration,...

Electrical Equipment & Systems

General Purpose Relay switches loads up to 15 amps.

Series OEG PCLH-2 is available with plug-in terminals for socket mounting and printed-circuit terminals for board mounting. Silver-alloy contacts are double-pole, double-throw form C, and are rated 15 A @ 120 Vac resistive and 10 A @ 250 Vac or 30 Vdc. AC coils are available from 6 to 240 V and DC coils from 6 to 110 V. Enclosed relay is suitable for electrical panels, factory automation...

Sensors, Monitors & Transducers

Defect Detection System runs reliably.

TM-DSS500kHz defect detection, measurement, and wire surface roughness analysis system detects bumps, neckdowns, splits, frays, contamination and inclusions on wire, cable, glass rods, catheter tube, fiber, and thread. It has 100 Ã-µm optical comparator slit detector, real time DSP defect recognition algorithms, and fail-safe detection algorithms that monitor sensor and system health and...

Controls & Controllers

Spanner Module offers visible rotary address switches.

FDN-DN1 Spanner module provides means to route data between 2 PLCs using DeviceNet(TM). By connecting DeviceNet networks directly, it eliminates needs for high-level control network pyramids. FDN-DN1 appears to each PLC as standard rack of I/O. Any DeviceNet scanner can send I/O data to Spanner module without additional software or complex configuration procedures. It is capable of transferring...