Carel USA    Manheim, PA 17545
Apr 22, 2013 Upon tERA subscription, connection box is installed which allows remote access to machine. Data is transmitted through customer's Internet network or via GPRS with independent channel. Data can be read remotely via PC, smartphone, or tablet. tDisplay offers customized machine interface, while tService enables users to optimize plant management via preventive analysis of remote systems operations. With tTrace, expert can analyze and compare machine performance by comparing several similar plants.

Intrasonics Inc    Thomaston, CT 06787
Apr 15, 2013 Heartbeat encoding package lets broadcasters continuously and automatically audio watermark their entire output, allowing TV viewing habits insight capture as well as development of creative second screen experiences. When media is consumed live or later, codes can be picked up by enabled apps on viewers' smartphones/tablets. These codes also empower development of additional content, such as access to exclusive content, play-along games, and loyalty rewards.

Digital Rapids Corporation    Markham L3R 6H3  Canada
Apr 15, 2013 StreamZ Live 4000EX for premium multiscreen applications, StreamZ Live 6000EX for dedicated broadcast applications, and StreamZ Live 8000EX for converged broadcast and multiscreen deployments offer configuration options to match project requirements. Each field-upgradeable model is available in single-, dual-, and quad-channel input densities. StreamZ Live 4000EX features IP outputs, while IP and ASI output options are available for StreamZ Live 6000EX and 8000EX.

STMicroelectronics    Lexington, MA 02421
Apr 10, 2013 Supplied in 0.4 mm pitch, 0.6 mm high chip-scale package, STHVDAC-304MF3 has 4-channel output for adjusting up to 4 tunable BST capacitors in antenna-matching circuits of multi-band GSM/WCDMA/3G-LTE smartphones. Product comprises high-voltage DAC for generating capacitor-tuning voltages from 2–20 V and is controlled via RF Front End (RFFE)-compliant, 1.8 V interface. Standard features include trigger- mode for time critical application, and shutdown mode to help extend battery life.

Belden, Inc.    University City, MO 63105
Apr 09, 2013 Lumberg Automation LioN-R Series provides secure connection between actuators/sensors and control units, even in harsh environmental conditions. Supporting real-time and isochronous real-time communication, modules offer 16 digital channels configured as inputs, outputs, or combination of both. Features include encapsulated metal housing, vibration-resistant M12 connection technology, and short-circuit proof outputs. Integrated dual-port switch (10/100 Mbps) allows line and ring topologies.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 08, 2013 Designed for use with ICP® and traditional charge output sensors, PCB® Models 483C40 and 483C41 also accept direct voltage input and feature selectable low pass filtering. Model 483C40 can be setup and controlled via Ethernet interface, while Model 483C41 has Ethernet interface and front panel keypad and display for setup and control. Multi-Channel Signal Conditioner (MCSC) Control Software comes standard on both multichannel signal conditioners.

WinSystems, Inc.    Arlington, TX 76011
Apr 05, 2013 Implemented as PC/104-Plus add-in I/O module, PPM-GIGE-2-POE can manage power to remotely located POE devices or board stacks. Solution integrates 2 independent Gigabit Ethernet ports with Power Sourcing Equipment (PSE) circuits. Both POE interfaces can use separate external DC supplies or share one external power source. Operating from -40° to +85°C, 3.6 x 3.8 in. module uses RJ-45 connectors to plug into 10/100/1000Mbps networks using CAT5 unshielded twisted pair copper cables.

Baumer Ltd.    Southington, CT 06489 1534
Apr 04, 2013 Suited for data transmissions implemented on utility vehicles, cranes, and industrial trucks, MAGRES series supports solid and blind-hollow shaft options and provides 12-bit single-turn and 16-bit multi-turn resolution with analog output by 12-bit D/A transducer. Non-contact, wear-free, magnetic sensing resists effects of dirt, dust, condensation, and temperature fluctuations. Encoders are available with voltage outputs from 0–10 V or 0.5–4.5 V or with current output from 4–20 mA.

Newport Corporation    Irvine, CA 92606
Apr 04, 2013 Available in sizes from 1 x 1 ft to 3 x 6 ft, precision-grade (PG) optical breadboards feature constrained layer modal damping that minimizes torsional and bending modes. Sealed mounting aids containment and clean-up of spills or retrieval of small objects, while 3/16-inch steel triple-core interface honeycomb design helps reduce weight while promoting stiffness and dynamic rigidity. At 2 or 4 in. thick, breadboards offer surface flatness of <±0.004 in. over 2 ft².

United Electronic Industries    Canton, MA 02021
Apr 03, 2013 With respective ±10 and ±300 Vdc input ranges, DNx-AI-218 and DNx-AI-228-300 feature 24-bit A/D resolution, 120 KSPS max sampling rate, as well as 350 Vrms channel-to-channel and channel-to-chassis isolation. DNR versions can be used with RACKtangle® chassis, while DNA versions can be installed into PowerDNA Cube chassis. Boards provide simultaneous sampling, and each channel is based on its own oversampled SAR converter. Input gains of 1, 2, 4, 8, 16, 32, and 64 are software programmable.

Analog Devices, Inc.    Norwood, MA 02062-9106
Apr 03, 2013 Measuring 7 x 2.3 cm, CN0267 PCB for loop-powered HART-enabled smart transmitter, targets industrial applications that need to operate within 3.5 mA power budget. Device combines ADuCM360 3.9 kSPS, 24-bit DAQ system-on-chip incorporating 32-bit ARM Cortex™M3 MCU; AD5421 loop-powered, 16-bit, 4–20 mA DAC with programmable voltage regulator;  and AD5700 complete HART modem IC. Circuit has been compliance tested, verified, and registered as approved HART solution by HART Communication Foundation.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 02, 2013 Designed for use with ICP® and traditional charge output sensors, 8-channel Models 483C40 and 483C41 also accept direct voltage input. Model 483C40 can be setup and controlled through Ethernet interface, while Model 483C41 has both Ethernet interface and front panel keypad and display for setup and control. Both are supplied with Multi-Channel Signal Conditioner Control software.

ABB Ltd.    Zurich CH-8050  Switzerland
Apr 02, 2013 Featuring Coils Current Signature Analysis (CSA) algorithm, CBS Lite CSA provides smart grid-enabled, condition-based, remote maintenance monitoring solution for SF6 power circuit breakers rated 38–800 kV. Solution continuously monitors interrupter wear, integrity of SF6 gas system, circuit breaker mechanical system, electrical control system, and auxiliaries. Comprised of microprocessor unit and sensors, product is housed in NEMA-1 enclosure and operates from -40 to +160°F.

Newport Corp.    Irvine, CA 92606
Mar 29, 2013 Suitable for critical laboratory applications, PG Series incorporates 3/16 in. steel triple-core interface honeycomb design and constrained layer modal damping to minimize torsional and bending modes. Precision-grade units are available in sizes from 1 x 1 ft to 3 x 6 ft  with thicknesses of 2 and 4 in. and surface flatness of less than ±0.004 in. over 2 sq ft. Imperial standard models feature ¼-20 tapped holes on 1 in. grid, while metric models feature M6 tapped holes on 25 mm grid.

Fluke Corp.    Everett, WA 98203
Mar 29, 2013 Based on CAT III 1,000 V/CAT IV 600 V multimeter, CNX Wireless System connects multiple measurement modules and sends simultaneous readings to master device up to 20 m away. Modules, which include AC Voltage, AC Current Clamp, iFlex AC Current Clamp, and K-Type Temperature units, can take live measurements or log up to 65,000 sets of data. Logged data can be saved to computer in .csv format. With system, users can place modules in hazardous areas and watch readings from safe distance.

Tektronix, Inc.    Beaverton, OR 97077
Mar 26, 2013 With 10-bit resolution and dynamic ranges up to -80 dBc narrowband and -60 dBc wideband, Model TDAC-25 powers AWG 70000 arbitrary waveform generators and is available for use in embedded systems used in defense, commercial aerospace, medical, and coherent optical communications. In RF-based applications, ASIC supports direct-generation of wideband signals, minimizing complexity through elimination of DAC arrays and frequency conversion blocks.

e-con Systems, Inc    Ballwin, MO 63021
Mar 26, 2013 Based on OmniVision OV5640 sensor, e-CAM51_44x is interfaced to PandaBoard, which is based on Texas Instruments OMAP4430/OMAP4460 processor, and includes 5 MP autofocus MIPI CSI-2 camera module as well as full schematics and Linux driver support with source code.  Board can stream Full HD 1080p at 30 fps and also supports HD 720p at 60 fps. Allowing flexible enclosure design, e-CAM57_MI5640_MOD comes with 70 mm flex cable; camera module can be placed up to 100 mm from processor interface.

Weidmuller, Inc.    Richmond, VA 23236
Mar 25, 2013 Helping maintain existing automation components while upgrading infrastructure, serial to fiber-optic Ethernet converters enable integration of serial port devices into industrial Ethernet networks for transmission over distances up to 5 km without any external signal boosters. Devices offer conversions from RS-232, RS-422, or RS-485; come in SC and ST fiber connection options; and also protect against EMI. Automatic baud rate recognition facilitates installation and setup.

Pulse Electronics    Trevose, PA 19053
Mar 25, 2013 Designed with 6 pins instead of 4 pins, B8841PNL Central Office VDSL2 Splitter Module enables protective device, such as sidactor, to be added on board underneath module and eliminates need for separate protection rack card. Pin location allows fast-acting secondary over-voltage protector to be used to protect filter from surge effects while maintaining VDSL2 performance. Splitter meets requirements for ETSI 600 Ω ADSL to VDSL2 applications and China YD/T 1187-2006 ADSL 600 Ω.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Mar 25, 2013 Housed in modular DIN rail mount package, X756510 Analog Signal Converter/Isolator covers 0–10 V, 0–20, and 4–20 mA input/output ranges. Multi-function 24–240 Vac/Vdc unit features DIP switch programming, 3-way isolation, and self-calibration circuitry that delivers accuracy without manual adjustment.