Omron Electronics LLC
Schaumburg, IL 60173
Mar 27, 2008 Model ZG 2D laser sensor performs height and width inspection to capture shapes by measuring X and Z axis in single pass. Real-time profile display is offered on controller's built-in LCD monitor and system includes 4 sensing heads that capture profiles from 3-70 mm wide using visible laser. With 18 built-in measuring tools, it can be configured to gauge height; 2- or 3-point step; edge position, width, angle, and area; and perform comparative calculations between measurements.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Mar 26, 2008 Series PTGA is suited for measuring pressure drop across filters and strainers, as well as pump performance testing and heat exchanger pressure drop monitoring. Unit offers piston sensing element that provides differential pressure ranges from 0-150 through 0-400 psid with ASME Grade B accuracy. Constructed from aluminum or 316 SS and available with two ¼ in. FNPT end connections, Series PTGA provides over-range protection to 5,000 psig.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Mar 26, 2008 Combining aluminum or 316 stainless steel construction with weather- and corrosion-resistant gauge front and shatter-resistant lens, Series PTGB is suited for measuring pressure drop across filters, strainers, and heat exchangers as well as pump performance testing. Piston-sensing element provides differential pressure from 0-10 to 0-110 PSID with ASME Grade B accuracy. Gage is available with two ¼ in. female NPT back or end connections.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Mar 26, 2008 Utilizing piston-sensing element, Series PTGC provides differential pressure ranges from 0-10 to 0-110 psid. Unit possesses weather- and corrosion-resistant front and shatter-resistant lens. Constructed from aluminum with 316 SS internal materials, gage features two ¼ in. FNPT end connections and provides over-range protection to 5,000 psig. Gage is suited for measuring pressure drop across filters and strainers, as well as pump performance testing and heat exchanger pressure drop monitoring.

Ashcroft Inc.
Stratford, CT 06614
Mar 21, 2008 Ashcroft® GC51, available in ranges up to 0-7,500 psig, and GC52, offering D/P ranges up to 400 in. of water, are contained in NEMA 4X/IP65 enclosure. Both gauge and differential pressure transmitters feature SS wetted parts accommodating wet or dry media. Built-in LED display and 4-20 mA output provide local indication and remote signaling. Devices measure fluid levels in tanks, water towers, and across membranes in water purification systems.

Automation U.S.A., Inc.
Gettysburg, PA 17325
Mar 18, 2008 MI Fe 500 µm Coating Thickness Measuring Instrument is pen-shaped probe for measurements of thin coatings on both normal and small parts like screws, small machine parts, rings, braces, nails, beams, or studs. Operating with Magnetic Inductive principle, it measures non-ferromagnetic coatings as well as lacquer, enamel, or plastic coatings on steel substrate. It is also available with coating thickness gauge stand.

m&h UK
Nottingham NG9 6NG  United Kingdom
Mar 03, 2008 Based on type 41.00 probe, hard-wired, real-time Touch Probing System allows sliding-head CNC lathe users to measure turned and milled features on every component after machining, while it is still in counter spindle and before ejection. Gauging arrangement, which employs fixed probe mounted on headstock, is also suitable for use on fixed-head, bar-fed, twin-spindle turning machines. Tolerances down to plus or minus a few microns can be maintained.

Oxford Instruments
Elk Grove Village, IL 60007
Feb 07, 2008 Combining X-ray tube and large LN2 free detector, X-Strata980 measures small areas of complex samples and delivers limits of detection in single digit ppms. It performs analysis and characterization of multi-layer coatings, SAC alloys, µPPF, and solar panels. With high resolution detector, product can identify, quantify, and differentiate neighboring elements. Unit can measure features as small as 150 microns in size. Users can choose empirical/fundamental parameter calibration.

Sky-Trax, Inc.
New Castle, DE 19720
Jan 17, 2008 Suited for on-board data collection, inventory management, and other automation systems, Sky-Trax Lift Height Sensor(TM) HS-1C determines height levels from 0-30 ft from floor with accuracy better than ±2 in. throughout range. Unit also provides stable mast height determination within 1 sec at any time. With optional USB interface module and software, sensor can capture lift height data on any computer running MS-Windows XP or Vista.

Lloyd Instruments Ltd. Forum House
Hampshire Hants  United Kingdom
Dec 17, 2007 Materials testing fixture measures force required for carton erection from flat, folded carton blanks. Measurements can be used to set up operating conditions for automatic carton erection machines. Device has V-shaped grooved rollers which retain grip on box yet allow box axis to rotate as it opens. Designed for compression testing using LFPlus single column universal materials testing machine, it is suitable for use with range of carton blanks.

Clark-Reliance Corp., The
Strongsville, OH 44136
Dec 11, 2007 Designed for ASME code compliance, LevelMax enables local and remote monitoring of boiler drum levels. This combination Drum Level Instrument Assembly utilizes Electro Eye-Hye System (Remote Drum Level Indicator) with water gauge glass attached for local, direct viewing of drum level. Electro Eye-Hye System is available with design pressures of 450, 1,000, 1,800, and 3,000 psig.

Crystal Engineering
San Luis Obispo, CA 93403
Dec 05, 2007 Intrinsically safe and ATEX certified, wet/wet Model XP2i-DP features burst disc that protects sensor from over-pressure on low side connection. Digital gauge provides datalogging capabilities and can be programmed for custom engineering units. Available in panel mounting and portable configurations, unit is tested and calibrated inside environmental test chambers using computer-controlled pressure controllers.

Kistler Instrumente AG
  Switzerland
Dec 05, 2007 Designed for measuring forces and moments on tires for trucks and other heavy goods vehicles, RoaDyn® S6HT TT (Tire Testing) is rotating 6-component measuring system for wheel and tire test that can be used like measuring hub. It offers measuring range of up to 220 and 100 kN in radial and axial direction, respectively. Modified outer part with different bolt patterns and adapter flange allows standard wheels to be mounted.

Automation U.S.A., Inc.
Gettysburg, PA 17325
Nov 16, 2007 QNix®8500 supports bi-directional wireless communication with PC via support for QNix® SAT thumb-sized wireless radio probe. It accommodates interchangeable probes with 200 mil max measuring range and offers multiple calibration options. Available with and without memory, system does not require calibration but allows for customized measurements. Software is available for transfer to and evaluation of data in Excel as well as gauge configuration.

WIKA Instrument Corporation
Lawrenceville, GA 30043
Nov 14, 2007 Supplied in stainless steel housing, DG-10 suits applications requiring local, battery-operated measurement and display instrument. Standard (DG-10-S) and enhanced (DG-10-E) versions include multifunction LCD with bar graph, featuring drag pointer function and min/max memory. Both use AA battery power and let users switch between international measurement units. Enhanced version includes backlit display and rotate-able housing as well as various user-programmable functions.

Adcole Corp.
Marlborough, MA 01752-3067
Nov 12, 2007 Model 1300 High-Speed Crankshaft Gage features powered tailstock and part driver to permit fully automatic loading. Capable of measuring diameters, roundness, cylindricity, timing angle, and stroke, it utilizes individual followers for rod and main journals and can achieve less than 1 min cycle times. It utilizes touchscreen and Windows XP® user interface and is offered in versions to accommodate crankshafts up to 1.0 m.

Omega Engineering, Inc. - omega.com
Stamford, CT 06907-0047
Nov 09, 2007 Respectively accurate to 0.10% or 0.25% of span, DPG7010 and DPG7025 are temperature-corrected from 0 to +150°F and incorporate 5-digit, 0.66 in. high, backlit LCD with percent-of-reading bar graph. Design carries NEMA-4 rating and features stainless steel wetted parts, cover, and 3 in. case. User-configurable options include 12 selectable units of measure, 7 languages, and password-protected calibration and disable functions.

Televac/ETI
Huntington Valley, PA 19006
Nov 08, 2007 Utilizing double inverted magnetron sensor technology, Self-Start 7FCS Cleanable UHV Cold Cathode Gauge offers vacuum measurement range of 1 x 10^-2 to 1 x 10^-11 Torr. Thermonic emitter can be ignited when vacuum system is pumped below 10^-7 Torr or power outage occurs and creates environment needed for plasma discharge to take place, enabling gauge to restart. Model MC300 and multichannel MM200 vacuum measurement instruments allow operation of gauge.

AMO Automatisierung
Nöfing 4   Austria
Nov 08, 2007 Suited for swivel or rotating axes on rotary tables, MHS Angle Measuring System eliminates accuracy errors related to mechanical installation, disc eccentricity, and bearing run-out. System integrates IP67-rated, stainless steel encoder ring scale directly onto rotating part. Available for diameters from 60-3,000 mm, ring scale is constructed with 0.65 mm thick, precision welding linear scale tape and can be mounted in areas with fluids without affecting accuracy.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Nov 01, 2007 Featuring corrosion-resistant ABS case and heat-resistant polycarbonate push-in window, 35W Series possesses psi scale with ±3-2-3% ASME B 40.1 Grade B accuracy. Pressure range of 0-300 psi is used on wet systems where water is available to sprinkler heads, while 0-80 retard to 250 psi pressure range is used on dry systems where lines are filled with air pressure until activation. Operating from -40 to 150°F, 3.5 in. gages include brass socket with C-shaped bronze Bourdon tube.