Flame Detectors

Safety & Security Equipment, Controls & Controllers, Sensors, Monitors & Transducers

Fire and Gas System provides hazard monitoring and control.

July 2, 2015

Designed for hazard monitoring and control at industrial sites, HS81-HS Controller performs flame, smoke, and gas detection as well as extinguishing/agent release. Unit interfaces with plant safety and control systems through multiple protocols and includes hot swap capability for replacement and auto-configuration of CPUs and power supplies without critical system shutdown. HS81-HS controller carries SIL2 and SIL3 ratings in addition to meeting NFPA-72 and EN-54 requirements. Read More

Sensors, Monitors & Transducers

Wireless Fire Sensing System protects challenging applications.

November 7, 2014

Integrating with new and existing fire alarm systems, SWIFT Smart Wireless Integrated Fire Technology detectors and modules are self-healing units that use Class A mesh network where every device acts as repeater with redundant path communication. Unique mesh IDs in each SWIFT network prevent miscommunication with other devices and inherent frequency hopping prevents system interference. System can have any combination of up to 50 devices per wireless gateway. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Laboratory and Research Supplies & Equipment

Flame Ionization Detector is unaffected by background gases.

August 28, 2014

Part of 9100 Series On-Line Gas Chromatograph, Flame Ionization Detector provides detection capabilities for hydrocarbon compounds and other VOCs. Chromatograph offers fully integrated GC software, programmable touchscreen, and USB interface. For unattended operation, unit features remote access and control, automatic calibration, and internal data storage. Other attributes include LAN connection, analog outputs, multipoint sampling, and graphical display of current or historic concentrations. Read More

Safety & Security Equipment, Sensors, Monitors & Transducers

Fire/Gas Detection System interfaces to plant-wide systems.

March 22, 2013

Supporting simultaneous interface via RS-485 Modbus, analog 4–20, relay contact, and SentryBus, Sentry IT Fire and Gas Detection System ensures new and legacy sensor modules can be deployed. Sentry Commander Logic ensures complex algorithms – zone voting, delay timing, multiple unique alarm levels – can be implemented with user configuration at spreadsheet level. Features include touch panel color display with menu-driven prompts, scalable design, and auto discovery of sensor modules. Read More

Software, Sensors, Monitors & Transducers

Flame and Gas Detectors utilize DTM software.

October 10, 2012

Available for gas and flame detectors, FDT/DTM standardizes communications and configuration interface between industrial field devices and host systems being utilized at facility. With FDT/DTM, any field device can be configured, operated, and maintained through standardized user interface, regardless of supplier, type, or communication protocol. Documentation, log extraction, fault diagnostics, sensor health, and predictive maintenance activities help end-users focus on process uptime. Read More

Safety & Security Equipment, Controls & Controllers, Sensors, Monitors & Transducers

Fire Detection Systems are USCG approved.

July 3, 2012

Intended for commercial vessels and recreational yachts, Marine Elite RSM Analog Addressable Fire Alarm Control Panels can host up to 256 fire detection devices, and can be expanded and networked to become part of larger systems. Units feature Apollo protocol smoke and heat detectors as well as 2 full SLC loops and microprocessor-based electronics. Compatible with eVIEW Analog Addressable Serial Annunciator, panel's controls and indications can extend to other locations. Read More

Sensors, Monitors & Transducers

Flame Detector supports digital HART communications.

June 1, 2012

Featuring triple spectrum design, Model 3600-I IR3 detects fuel and gas fires with maximum immunity to false alarms. Unit can detect 1 ft² gasoline pan fire at 215 ft in less than 5 seconds. Offering automatic and manual built-in-test, detector is equipped with heated window to eliminate condensation and icing in harsh weather conditions. Output options include 3 relays for alarm, fault, and auxiliary; 0-20 mA; HART protocol; and Modbus compatible RS-485. Read More

Sensors, Monitors & Transducers

Flame Detector monitors entire flame spectrum to verify alarms.

May 23, 2012

Used in commercial and industrial applications, Fire Sentry units integrate with any version of ONYX Series fire alarm systems for detection of true fire emergencies. Series of algorithms accelerate detection of real fire event while minimizing false alarms. In addition to monitoring for spikes in radiant energy of flame, detectors monitor entire flame spectrum for inconsistencies to verify alarm. Units protect against fires from hydrocarbon and non-hydrocarbon gases in all conditions. Read More

Safety & Security Equipment, Sensors, Monitors & Transducers

Combination Fire/CO Detector meets CO legislation requirements.

April 24, 2012

Able to verify true emergency and deter false alarms, 4-Warn/CO detector incorporates sensing elements for smoke, CO (carbon monoxide), flame, and heat. Addressable sensing technology meets CO detection legislation in all 50 states. As part of E3 Series® fire alarm and emergency communications system from Gamewell-FCI, local audio signals from detector's B200S sounder base can be automatically silenced when live and pre-recorded emergency communications are delivered via main system. Read More

Safety & Security Equipment, Controls & Controllers, Sensors, Monitors & Transducers

Intelligent Fire Systems combine flexibility, scalability.

March 2, 2012

Cerberus(TM) PRO and Desigo(TM) fire system panels and smoke detectors feature components that may be adapted to meet new conditions. Integrated in both systems, ASAtechnology(TM) is immune to deceptive phenomena and fosters early fire detection. Control panels are networkable, and up to 16 panels can be connected using peer-to-peer networking. Other features include integrated degrade mode, application-specific detection profiles, dual optical sensors, and independent CO detection. Read More

Safety & Security Equipment, Sensors, Monitors & Transducers

Combination Smoke and CO Detector minimizes nuisance alarms.

September 19, 2011

Part of ONYX Series fire alarm system, IntelliQuad(TM) PLUS combines 4 sensing elements for smoke, CO, light/flame, and heat to quickly verify true fire or CO emergency. Separate signals for CO and smoke allow for ONYX systems to respond appropriately based on event type. Combined with addressable B200S sounder base, IntelliQuad PLUS serves as all-in-one detection and notification unit. Applications include hotels, college dorms, healthcare facilities, apartments, and military housing. Read More

Sensors, Monitors & Transducers, Green & Clean

Gas, Flame Detection System is solar-powered and wireless.

May 19, 2011

To promote flexibility, SiteShield Detection System can be configured and reconfigured for any site-specific energy demands, environmental conditions, and safety requirements. Offering simultaneous gas and flame detection, autonomous unit is available in stand-alone, dual-sensor detector configuration or in networked system. It can communicate with 16 remote sensors (expandable) from one controller, and detectors may be added/subtracted to network at any time without going offline. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Flame Detector is designed for easy installation.

February 22, 2010

Combining multi-spectrum infrared sensor array with neural network technology processing, FL4000H delivers reliable flame monitoring with detection range of 230 ft and field of view of 100° @ 100 ft. Design accelerates insertion of cable into base of unit, permitting placement of detector in tight areas. MSIR sensor array and NNT function together as adaptive and intuitive decision-making mechanism, promoting reliable discrimination between actual flames and false alarms. Read More

Sensors, Monitors & Transducers

Flame Ionization Detector delivers accurate hydrocarbon measurement.

November 24, 2009

Servomex SERVOPRO FID provides 100 ppb resolution hydrocarbon measurement, with all flow electronically and temperature regulated. It includes Ethernet/Internet connectivity, allowing users to check parameters or troubleshoot unit offsite. Device's logarithmic amplifier minimizes drift and thermal noise. Lock Range function allows operator to fix unit within desired range, while automatic ranging feature changes measurement parameters according to impurities detected. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

UV-Based System deters illegal in-facility smoking.

September 24, 2009

Suited for buildings in cities and states where it is illegal for employees to smoke, CatchaSmoker series uses UV flame detector technology to catch smokers in offices and factory bathrooms. Technology detects smoker lighting up and alerts management, either with loud alarm or totally silent/stealth alarm, via building-wide paging system. Installation can be accomplished by regular maintenance staff in less than 1 hr per location. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Flame Detectors are available with HART communications.

September 17, 2009

Flame detectors FL3100H (UV/IR) and FL3101H (UV-only) detect fires and provide alarm outputs directly from detector while maintaining false alarm immunity. In addition to process variable, HART protocol permits access to device configuration, diagnostics, as well as maintenance and alarm records. Features include continuous optical path monitoring, 4-20 mA stepped output, 3 SPDT high current programmable relay outputs, and RS-485 serial output with Modbus RTU protocol. Read More

Safety & Security Equipment, Sensors, Monitors & Transducers

Smoke Detector offers early fire detection, localization.

June 17, 2009

Protecting areas up to 400 m², 420 Series Aspirating Smoke Detector TM features 10-digit bar graph for monitoring smoke pollution and utilizes LSN improved technology that accommodates currents to 1,500 mA at distances to 3,000 m. ROOM-IDENT feature can individually identify up to 5 rooms and accelerates tracking down of fire source in 4 phases. Intelligent signal processor discerns real/false alarms, and results are displayed on unit itself and Bosch Modular Fire Panel 5000 Series. Read More

Vision Systems, Computer Hardware & Peripherals, Sensors, Monitors & Transducers, Optics & Photonics

Safety Surveillance System works automatically.

May 18, 2009

With Class I, Div. 1 and NEMA 4X approvals from FM, CSA, CE, and ATEX, xWatch® camera and surveillance system automatically detects and records safety incidents for remote or local viewing. System enables immediate viewing of industrial hazards remotely via configurable IP address, and record and review incidents for event analysis. Flame detector with camera views same expanse, and continuous, real-time video captured provides operator with surveillance capabilities during normal operation. Read More

Sensors, Monitors & Transducers

Optical Flame Detectors are explosion proof.

January 16, 2009

Designed to protect municipal/industrial waste disposal facilities, SharpEye 40/40I optical flame detectors are fitted with heated window to withstand harshest of conditions, and HART output to offer quality information during installation or maintenance. Detectors are Hazardous Area approved (FM/ATEX/IECEx/CSA) for location in zone I areas and 3rd party performance approved (EN54-10, FM, DNV). Product, when placed along edge of waste pit, enables continuous monitoring of waste pit. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Optical Flame Detectors have explosion-proof design.

December 19, 2008

Addressing fire and explosion hazards in bio-fuel plants, SharpEye 40/40 series includes IR, UV, UV/IR, IR3, and multi-spectral flame detectors with false activation immunity. Sensing distances reach 135 ft, and HART capabilities enable digital communications. Sealed electronics protect integrity of unit when open and heated window prevents condensation in humid environments. Additional protection is provided against hydrocarbon-based and water vapors. Read More