CommProve IT Corp.    Allen, TX 75002
Nov 15, 2011 Supporting traditional and IP transmission beyond 10 Gbps Ethernet, CommProve NetLedge p20K monitors wide range of network interfaces, including 2, 2.5G, 3G, and 4G, as well as wireline and VoIP networks. High-density probe solution is capable of connecting up to 16 bi-directional 10 Gbps links, depending on configuration of network, as well as offering active backup redundancy. If additional processing power is needed, real-time 1U rack unit interfaces with third party solutions.

Porter Instrument Div., Parker Hannifin Corp.    Hatfield, PA 19440
Nov 15, 2011 Available in variety of materials with elastomeric seals, P-Series measures gas flows up to 350 sft³/m of air and liquids flows up to 450 gpm of water with temperatures to 575°F. Units have NEMA/IP enclosures for weatherproof applications, as well as intrinsically safe transmitter and alarm options. Offered with certified calibrations conforming to ISA RP 16.6, NIST traceable meters are suited for oil and gas production, power generation, chemical/petrochemical, and pharmaceutical manufacturing.

C&K Components    Newton, MA 02458
Nov 14, 2011 Equipped with infrared LED and phototransistor to precisely detect control signal, Model RB-4G0124 provides electrical life of 1,000,000 cycles and mechanical life of 20,000,000 cycles. Model RB-231, featuring shielded design that provides 10° angle of detection, provides operating life of 100,000 cycles. Conductive ball is movable inside tube to generate signal and contact. Both are suited for movement detection, safety devices, and consumer electronic applications.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Nov 14, 2011 Used to meet demands for overheating detection applications in consumer electronics devices, PRF15 series comprises devices with detection temperatures from +80 to +150°C in 10°C steps. Each miniature positive temperature coefficient (PTC) thermistor, supplied in 1.0 x 0.5 mm 0402 package, exhibits tight temperature tolerance of ±3°C. Thermistor resistance at +25°C is 1 kohm, with preferred detection points occurring at 10 and 100 kohm values.

Eagle Eye Power Solutions, LLC    Milwaukee, WI 53211
Nov 14, 2011 Using optical refraction, Model SG-1000 measures temperature-compensated specific gravity of batteries with 3 second measurement speed. To measure, user extracts sample in suction tube and presses START button. CE-certified unit can measure specific gravity and temperature simultaneously. Housed in carrying case weighing less than 5 lb, Model SG-1000 features measurement range of 1.000-1.3000 and operating temperature of 41-104°F.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Nov 14, 2011 Suited for both commercial and military applications, 7503A Series feature micro-machined MEMS capacitive sensing element housed in hermetically sealed titanium case. Units combine integrated VC accelerometer chip with high drive, low impedance buffer for low-level acceleration measurements. Operating from +9 to +32 VDC power, accelerometers offer low-end frequency response down to DC (0 Hz), with upper frequency range of 400-2,500 Hz with differential output.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Nov 14, 2011 Weighing just 4 g, Series 3313A and 3313AH have laser welded titanium design, which includes quartz sensing elements coupled to low noise JFET electronics and broad frequency response of 1.2-10,000 Hz. Miniature hermetically sealed units offer sensitivities of 1, 5, and 10 mV/g, and utilize industry standard ¼-28 4-pin radial connector and adhesive mount. Series 3313AH is capable of operating at temperatures up to +325°F.

STMicroelectronics    Lexington, MA 02421
Nov 14, 2011 Dual embedded finite-state machines within LIS3DSH let user implement customized motion detection-based applications with flexibility, reducing workload of microprocessor by moving programming functionality inside sensor. Programs identify specific motions or gestures, custom-defined in instruction set that runs inside sensor firmware, and initiate associated actions or applications. Additional features include embedded FIFO memory block, temperature sensor, and self-test function.

Omega Engineering, Inc.    Stamford, CT 06907
Nov 11, 2011 Accepting 2 thermocouple inputs, iSD-TC Series triggers alarm if temperature goes below or above set point. Alarm can also be triggered if AC power fails. In event of power failure, monitor will continue to collect data for 2 days powered by 9 V alkaline battery. Failure on Ethernet network will not interrupt data recording. Supplied with removable 2 GB SD Flash Memory card, iSD-TC can store up to 7 years of readings taken at 10 sec intervals.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Nov 11, 2011 Housed in miniature 0.25 in. cube, ICP® Model 356A03 features hermetically sealed titanium design. Cable strain relief connection with large crimp tube provides optimized shear and tensile strength. Compatible with any ICP® signal conditioner or readout device that includes ICP® power, Model 356A03 is suited for small component qualification, environmental stress screening, and vibration measurement with space restrictions.

Schmersal Inc.    Tarrytown, NY 10591
Nov 11, 2011 Designed to meet stringent North American and European approvals, RSS36 Series is suited for highest level of machine safety circuits, PLe per ISO13849-1 and SIL3 per IEC61508. RFID technology may be used in combination with Pulse-Echo technology in series circuit up to 31 devices while maintaining desired safety level. Providing holding force of 5 lb, magnetic latch option can serve as door stop. Diagnostic LEDs indicate errors, mis-alignment, and door open/closed signaling.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Nov 10, 2011 Offered with Hall-Effect or magnetoresistive sensors as well as single-channel or quadrature signaling, Series 18 sensors detect passing magnets from shaft-mounted pulser disc or wrap, and output voltage pulse frequency proportional to shaft rotation speed. All models operate down to (and including) zero speed and are compatible with PLC inputs, tachometers, and range of frequency meters. Pulser disc, mounting bracket, and 2 stainless steel hex jam nuts are standard.

Osensa Innovations Corp.    Coquitlam V3J0A3  Canada
Nov 10, 2011 Featuring DIN rail mount design, Model FTX-301 supports 3 fiber optic temperature inputs and includes 3 optically isolated 4-20 mA analog outputs, while Model FTX-302 is same device only without analog outputs. Both include industrial RS-485 serial bus for modbus communication to multiple daisy-chained devices. Providing real-time temperature data to 200°C, each device is configured and monitored via OSENSAView FTX software and direct USB connection to PC/laptop.

Steinbichler Optotechnik GmbH    Neubeuern   Germany
Nov 09, 2011 Offering complete solution for precision 3D digitalization, COMET 5 Eco can be positioned on various handling systems and includes INSPECTplus inspection software, column stand, and corresponding computer hardware. Modular construction enables system to adapted to various measuring field sizes, enabling individual configuration for respective measuring tasks. COMETplus software, projection technology, and one-camera technologies optimize speed as well as data quality.

Servomex Group Ltd    Crowborough East Su TN6 3DU  United Kingdom
Nov 09, 2011 Able to detect wide range of gases, SERVOTOUGH LaserCompact 2900 delivers true continuous in-situ monitoring and is optimized for measurement across pipes and along short cells. Unit utilizes Tunable Diode Laser Spectroscopy technology to deliver response time of less than 2 seconds with minimal interference from background gases. Certified to ATEX and IECEx standards, LaserCompact is suitable for gas measurements in hot, dirty, or dangerous environments.

Lamar Lighting Co., Inc.    East Farmingdale, NY 11735
Nov 09, 2011 Controlled by 2 external infrared motion sensors, Model DS-LED operates at 20% light/power in standby mode and illuminates to full light output upon occupancy. Sensors are field adjustable for optimum coverage, range, and time delay using optional IR remote control. Factory pre-set to 5% light level with 5 minute time delay and 360°/26 ft diameter coverage, luminaire is suitable for stairwells, utility rooms, and other areas where maximum light levels are not required on constant basis.

Libelium Comunicaciones Distribuidas S.L.    Zaragoza   Spain
Nov 08, 2011 Using Expansion Radio Board for Waspmote, Vehicle Traffic Monitoring Platform senses flow of Bluetooth devices in given street, roadway, or passageway while differentiating hands-free car kits from pedestrian phones. Sensor data is then transferred by multi-hop ZigBee radio, via internet gateway, to server. Traffic measurements can be analyzed to address congestion of either vehicle or pedestrian traffic. With 6 power levels, sensor operators can set inquiry zone from 10-50 m.

Xenon Inc.    Irvine, CA 92612
Nov 08, 2011 Using cellular network to connect remote sites with central control and monitoring stations, Model T925 enables users to remotely monitor and control automation systems. Up to 250 controllers can simultaneously communicate through cellular network with VPN router installed at central control and monitoring station. Accepting up to 7 Ethernet inputs as well as 4 digital inputs, 4 analog inputs, and 2 temperature inputs, Model T925 uses 4 digital relay outputs to control remote systems.

Montalvo Corporation    Gorham, ME 04038
Nov 08, 2011 Offering either single or multiple tension zone monitoring, Model i4-HD can be supplied with analog or LCD digital meter displays. Unit provides excitation voltage as well as zero and calibration circuitry. Output can interface with PLC, PC, or DC/AC or servo drives. Compatible with most semiconductor strain gauge and foil gauge load cells, Model i4-HD delivers accurate and repeatable web tension.

Endress + Hauser Inc.    Greenwood, IN 46143
Nov 08, 2011 Integrating with Rockwell Automation PlantPAx process automation system, Promag 53 measures electrically conductive liquids with minimum conductivity of 5 µS/cm and flow rates to 1,250 gpm. Integrated Web server allows authorized users to remotely view flow data, conduct diagnostics, configure flowmeter, or perform process optimization. By using EtherNet/IP, up to 10 variables can be configured, including volume flow, calculated mass flow, and totalized flow for remote access.